Display 'grainy' like safe mode

Me again. Had to use the rescue disks and now the screen
display is grainy, like its in safe mode, but its not.
Also boxes etc are not lining up properly but off centred
and not sitting/fitting right, and there's too much info
on the page, so I have to scroll sideways back and forth
to read it. Any ideas, please.

Best guess you need to change your Display Properties:
ControlPanel/Display/Settings

Increase both Screen Resolution and Colour Depth.

Then right-click on the Desktop, choose
ArrangeIcons/whatever.


Rick

Suz wrote:
Me again. Had to use the rescue disks and now the screen
display is grainy, like its in safe mode, but its not.
Also boxes etc are not lining up properly but off centred
and not sitting/fitting right, and there's too much info
on the page, so I have to scroll sideways back and forth
to read it. Any ideas, please.

Thanks, Rick but the slider wont budge, its stuck at 640x
480 16 colour, when I try to move the default monitor to
800x600 it will not stay there but reverts back as above.
Any ideas???
-----Original Message-----
Best guess you need to change your Display Properties:
ControlPanel/Display/Settings

Increase both Screen Resolution and Colour Depth.

Then right-click on the Desktop, choose
ArrangeIcons/whatever.


Rick

Suz wrote:
Me again. Had to use the rescue disks and now the
screen
display is grainy, like its in safe mode, but its not.
Also boxes etc are not lining up properly but off
centred
and not sitting/fitting right, and there's too much
info
on the page, so I have to scroll sideways back and
forth
to read it. Any ideas, please.
.

How about Removing the Default Monitor from DeviceManager and rebooting,
Windows should pick it up and install the right one.


Rick


Suz wrote:
Thanks, Rick but the slider wont budge, its stuck at 640x
480 16 colour, when I try to move the default monitor to
800x600 it will not stay there but reverts back as above.
Any ideas???

-----Original Message-----
Best guess you need to change your Display Properties:
ControlPanel/Display/Settings

Increase both Screen Resolution and Colour Depth.

Then right-click on the Desktop, choose
ArrangeIcons/whatever.


Rick

Suz wrote:

Me again. Had to use the rescue disks and now the

screen

display is grainy, like its in safe mode, but its not.
Also boxes etc are not lining up properly but off

centred

and not sitting/fitting right, and there's too much

info

on the page, so I have to scroll sideways back and

forth

to read it. Any ideas, please.

.

Reboot to Safe Mode
Open Device Manager
Remove ALL Display Adapters
Remove ALL Monitors
Reboot to Normal Mode - Windows will reinstall the required drivers -
hopefully curing your problem.



--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp

"Suz" wrote in message
...
Thanks, Rick but the slider wont budge, its stuck at 640x
480 16 colour, when I try to move the default monitor to
800x600 it will not stay there but reverts back as above.
Any ideas???
-----Original Message-----
Best guess you need to change your Display Properties:
ControlPanel/Display/Settings

Increase both Screen Resolution and Colour Depth.

Then right-click on the Desktop, choose
ArrangeIcons/whatever.


Rick

Suz wrote:
Me again. Had to use the rescue disks and now the
screen
display is grainy, like its in safe mode, but its not.
Also boxes etc are not lining up properly but off
centred
and not sitting/fitting right, and there's too much
info
on the page, so I have to scroll sideways back and
forth
to read it. Any ideas, please.
.

Thanks Rick, I will try that.
-----Original Message-----
How about Removing the Default Monitor from DeviceManager
and rebooting,
Windows should pick it up and install the right one.


Rick


Suz wrote:
Thanks, Rick but the slider wont budge, its stuck at
640x
480 16 colour, when I try to move the default monitor
to
800x600 it will not stay there but reverts back as
above.
Any ideas???

-----Original Message-----
Best guess you need to change your Display Properties:
ControlPanel/Display/Settings

Increase both Screen Resolution and Colour Depth.

Then right-click on the Desktop, choose
ArrangeIcons/whatever.


Rick

Suz wrote:

Me again. Had to use the rescue disks and now the

screen

display is grainy, like its in safe mode, but its not.
Also boxes etc are not lining up properly but off

centred

and not sitting/fitting right, and there's too much

info

on the page, so I have to scroll sideways back and

forth

to read it. Any ideas, please.

.

.

Suz wrote:

Thanks Rick, I will try that.

Let us know how it works out.


Rick



-----Original Message-----
How about Removing the Default Monitor from DeviceManager

and rebooting,

Windows should pick it up and install the right one.


Rick


Suz wrote:

Thanks, Rick but the slider wont budge, its stuck at

640x

480 16 colour, when I try to move the default monitor

to

800x600 it will not stay there but reverts back as

above.

Any ideas???


-----Original Message-----
Best guess you need to change your Display Properties:
ControlPanel/Display/Settings

Increase both Screen Resolution and Colour Depth.

Then right-click on the Desktop, choose
ArrangeIcons/whatever.


Rick

Suz wrote:


Me again. Had to use the rescue disks and now the

screen


display is grainy, like its in safe mode, but its not.
Also boxes etc are not lining up properly but off

centred


and not sitting/fitting right, and there's too much

info


on the page, so I have to scroll sideways back and

forth


to read it. Any ideas, please.

.


.