If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Windows 98SE error when loading
My computer crashed the other day due to a power outage. It was running 2000
but when I tried to reload 2000, it came up with a bunch of IRQ errors on installation so I tried a fresh load of 98SE just to get the computer up and running. Upon the last reboot after the hardware install is complete, I receive a msgsrv32 error and the computer then locks up. The machine has a 2.0 Ghz Celeron w/256MB RAM on an AOpen MX46-533V motherboard. The hard drive is a WD Caviar 300AA 30GB (5400 rpm, ATA 66) HDD. Any suggestions on what I can do to fix this problem? I have tried reloading 98 a bunch of times and come up with the same error. |
#2
|
|||
|
|||
Windows 98SE error when loading
What's the exact error message you receive?
-- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "John Wiltfong" wrote in message ... My computer crashed the other day due to a power outage. It was running 2000 but when I tried to reload 2000, it came up with a bunch of IRQ errors on installation so I tried a fresh load of 98SE just to get the computer up and running. Upon the last reboot after the hardware install is complete, I receive a msgsrv32 error and the computer then locks up. The machine has a 2.0 Ghz Celeron w/256MB RAM on an AOpen MX46-533V motherboard. The hard drive is a WD Caviar 300AA 30GB (5400 rpm, ATA 66) HDD. Any suggestions on what I can do to fix this problem? I have tried reloading 98 a bunch of times and come up with the same error. |
#3
|
|||
|
|||
Windows 98SE error when loading
What's the exact error message you receive?
-- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "John Wiltfong" wrote in message ... My computer crashed the other day due to a power outage. It was running 2000 but when I tried to reload 2000, it came up with a bunch of IRQ errors on installation so I tried a fresh load of 98SE just to get the computer up and running. Upon the last reboot after the hardware install is complete, I receive a msgsrv32 error and the computer then locks up. The machine has a 2.0 Ghz Celeron w/256MB RAM on an AOpen MX46-533V motherboard. The hard drive is a WD Caviar 300AA 30GB (5400 rpm, ATA 66) HDD. Any suggestions on what I can do to fix this problem? I have tried reloading 98 a bunch of times and come up with the same error. |
#4
|
|||
|
|||
Windows 98SE error when loading
Ron,
The exact messege is MSGSRV32 caused a segment not present fault in module SETUPX.DLL at 0002.000056ff. It was also followed by a bunch of register and byte numbers. Thanks for the help. "Ron Badour" wrote: What's the exact error message you receive? -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "John Wiltfong" wrote in message ... My computer crashed the other day due to a power outage. It was running 2000 but when I tried to reload 2000, it came up with a bunch of IRQ errors on installation so I tried a fresh load of 98SE just to get the computer up and running. Upon the last reboot after the hardware install is complete, I receive a msgsrv32 error and the computer then locks up. The machine has a 2.0 Ghz Celeron w/256MB RAM on an AOpen MX46-533V motherboard. The hard drive is a WD Caviar 300AA 30GB (5400 rpm, ATA 66) HDD. Any suggestions on what I can do to fix this problem? I have tried reloading 98 a bunch of times and come up with the same error. |
#5
|
|||
|
|||
Windows 98SE error when loading
Ron,
The exact messege is MSGSRV32 caused a segment not present fault in module SETUPX.DLL at 0002.000056ff. It was also followed by a bunch of register and byte numbers. Thanks for the help. "Ron Badour" wrote: What's the exact error message you receive? -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "John Wiltfong" wrote in message ... My computer crashed the other day due to a power outage. It was running 2000 but when I tried to reload 2000, it came up with a bunch of IRQ errors on installation so I tried a fresh load of 98SE just to get the computer up and running. Upon the last reboot after the hardware install is complete, I receive a msgsrv32 error and the computer then locks up. The machine has a 2.0 Ghz Celeron w/256MB RAM on an AOpen MX46-533V motherboard. The hard drive is a WD Caviar 300AA 30GB (5400 rpm, ATA 66) HDD. Any suggestions on what I can do to fix this problem? I have tried reloading 98 a bunch of times and come up with the same error. |
#6
|
|||
|
|||
Windows 98SE error when loading
Try this first:
Error Message.... http://support.microsoft.com/?kbid=306618 If no joy, try what others have tried: http://groups.google.com/groups?hl=e...L+&qt_s=Search -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "John Wiltfong" wrote in message ... Ron, The exact messege is MSGSRV32 caused a segment not present fault in module SETUPX.DLL at 0002.000056ff. It was also followed by a bunch of register and byte numbers. Thanks for the help. "Ron Badour" wrote: What's the exact error message you receive? -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "John Wiltfong" wrote in message ... My computer crashed the other day due to a power outage. It was running 2000 but when I tried to reload 2000, it came up with a bunch of IRQ errors on installation so I tried a fresh load of 98SE just to get the computer up and running. Upon the last reboot after the hardware install is complete, I receive a msgsrv32 error and the computer then locks up. The machine has a 2.0 Ghz Celeron w/256MB RAM on an AOpen MX46-533V motherboard. The hard drive is a WD Caviar 300AA 30GB (5400 rpm, ATA 66) HDD. Any suggestions on what I can do to fix this problem? I have tried reloading 98 a bunch of times and come up with the same error. |
#7
|
|||
|
|||
Windows 98SE error when loading
Try this first:
Error Message.... http://support.microsoft.com/?kbid=306618 If no joy, try what others have tried: http://groups.google.com/groups?hl=e...L+&qt_s=Search -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "John Wiltfong" wrote in message ... Ron, The exact messege is MSGSRV32 caused a segment not present fault in module SETUPX.DLL at 0002.000056ff. It was also followed by a bunch of register and byte numbers. Thanks for the help. "Ron Badour" wrote: What's the exact error message you receive? -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "John Wiltfong" wrote in message ... My computer crashed the other day due to a power outage. It was running 2000 but when I tried to reload 2000, it came up with a bunch of IRQ errors on installation so I tried a fresh load of 98SE just to get the computer up and running. Upon the last reboot after the hardware install is complete, I receive a msgsrv32 error and the computer then locks up. The machine has a 2.0 Ghz Celeron w/256MB RAM on an AOpen MX46-533V motherboard. The hard drive is a WD Caviar 300AA 30GB (5400 rpm, ATA 66) HDD. Any suggestions on what I can do to fix this problem? I have tried reloading 98 a bunch of times and come up with the same error. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can't connect to my network printer | Martin Healy | Networking | 8 | July 6th 05 10:35 PM |
WINDOWS GURU - DAN GOOKIN | AAH | General | 0 | June 22nd 05 09:37 AM |
re-installing windows 98SE | Dennis | General | 1 | July 31st 04 03:16 AM |
FAQ: Win98 users: Upgrading to WinXP, IE6, etc. | JM | Setup & Installation | 6 | July 26th 04 01:44 PM |
FAQ: Win98 users: Upgrading to WinXP, IE6, etc. | JM | Improving Performance | 6 | July 26th 04 01:44 PM |