If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
large visual display - Windows ME
The system will not allow me to change the display
settings. Everytime I press the apply button to increase the pixels, the system prompts me to restart the computer. The settings do not change. Any suggestions? |
#2
|
|||
|
|||
Sounds like your Display Adapter driver is no longer being properly
recognised, is incorrectly set-up, or is corrupted. Boot into Safe Mode and in Device Manager, 'Remove' any/all Display Adapters and Monitors and then re-boot. WinMe *should* re-detect (Plug&Play) your video card and monitor and then should install the 'correct' drivers. If it still doesn't help, you'll need to install the latest WinMe driver for your Video Card (Adapter) which you should be available to download from the card manufacturers web site. HTH and good luck Mart "Jasmine" wrote in message ... The system will not allow me to change the display settings. Everytime I press the apply button to increase the pixels, the system prompts me to restart the computer. The settings do not change. Any suggestions? |
#3
|
|||
|
|||
We have a similar problem with our Dell Latitude laptop.
AFter installing the final MS Windows ME software update, our display went to 640x480-16 and refuses to change back to any larger size. We've tried everything including going back to the VGA adapter, then upgrading to the NeoMagic 128XD driver from 1999 and then the Microsoft one from 2000, all to no avail. There must be some farfle in the .ini files, registry, or driver configs that was a leftover from the upgrade (same on me for doing that right?). How exactly does one 'remove' the adapter, you noted below? Thanks -----Original Message----- Sounds like your Display Adapter driver is no longer being properly recognised, is incorrectly set-up, or is corrupted. Boot into Safe Mode and in Device Manager, 'Remove' any/all Display Adapters and Monitors and then re-boot. WinMe *should* re-detect (Plug&Play) your video card and monitor and then should install the 'correct' drivers. If it still doesn't help, you'll need to install the latest WinMe driver for your Video Card (Adapter) which you should be available to download from the card manufacturers web site. HTH and good luck Mart "Jasmine" wrote in message ... The system will not allow me to change the display settings. Everytime I press the apply button to increase the pixels, the system prompts me to restart the computer. The settings do not change. Any suggestions? . |
#4
|
|||
|
|||
How exactly does one 'remove' the adapter, you noted below?
By booting into Safe Mode and then opening Device Manager and use the 'Remove' option to delete - or more accurately 'remove' - any/all Display Adapters. (You will probably find 'several' there - whereas you'd only find one in Normal Mode - hence the need to do it in Safe Mode) When you re-boot, WinMe will detect that drivers are required and you must point it to the original NeoMagic (or whatever was supplied by Dell) drivers, BEFORE WinMe tries to install its own default drivers. Confirm that you do have the correct WinMe compatible drivers for your specific laptop model by checking their availability on Dell's website. Mart " wrote in message ... We have a similar problem with our Dell Latitude laptop. AFter installing the final MS Windows ME software update, our display went to 640x480-16 and refuses to change back to any larger size. We've tried everything including going back to the VGA adapter, then upgrading to the NeoMagic 128XD driver from 1999 and then the Microsoft one from 2000, all to no avail. There must be some farfle in the .ini files, registry, or driver configs that was a leftover from the upgrade (same on me for doing that right?). How exactly does one 'remove' the adapter, you noted below? Thanks -----Original Message----- Sounds like your Display Adapter driver is no longer being properly recognised, is incorrectly set-up, or is corrupted. Boot into Safe Mode and in Device Manager, 'Remove' any/all Display Adapters and Monitors and then re-boot. WinMe *should* re-detect (Plug&Play) your video card and monitor and then should install the 'correct' drivers. If it still doesn't help, you'll need to install the latest WinMe driver for your Video Card (Adapter) which you should be available to download from the card manufacturers web site. HTH and good luck Mart "Jasmine" wrote in message ... The system will not allow me to change the display settings. Everytime I press the apply button to increase the pixels, the system prompts me to restart the computer. The settings do not change. Any suggestions? . |
#5
|
|||
|
|||
Thanks for the help, but alas, the problem persists.
I found the original NeoMagic MagicGraph XD driver at the Dell site (listed as for Win98) and brought it down. I uninstalled everything I could find in Device Manager while in Safe Mode. Rebooted, Windows identified the missing drivers and I led it to the Dell driver. Rebooted. Same old small screen. Changed the screen to 800 x 600. Rebooted. Same old small screen. Rebooted in Safe Mode. Interestingly, the 'Peformance Tab' tells me that I am running paging in MSDOS compatibility mode because some kind of driver was loaded by config.sys (which has NOTHING in it) and / or by autoexec.bat which only has a couple of window dir commands. So we are still stuck with a slow performing, tiny screen windows machine. This is worse than being a freshman wizard at Hogwarts, try ing spells and getting unrelated results. -----Original Message----- How exactly does one 'remove' the adapter, you noted below? By booting into Safe Mode and then opening Device Manager and use the 'Remove' option to delete - or more accurately 'remove' - any/all Display Adapters. (You will probably find 'several' there - whereas you'd only find one in Normal Mode - hence the need to do it in Safe Mode) When you re-boot, WinMe will detect that drivers are required and you must point it to the original NeoMagic (or whatever was supplied by Dell) drivers, BEFORE WinMe tries to install its own default drivers. Confirm that you do have the correct WinMe compatible drivers for your specific laptop model by checking their availability on Dell's website. Mart " wrote in message ... We have a similar problem with our Dell Latitude laptop. AFter installing the final MS Windows ME software update, our display went to 640x480-16 and refuses to change back to any larger size. We've tried everything including going back to the VGA adapter, then upgrading to the NeoMagic 128XD driver from 1999 and then the Microsoft one from 2000, all to no avail. There must be some farfle in the .ini files, registry, or driver configs that was a leftover from the upgrade (same on me for doing that right?). How exactly does one 'remove' the adapter, you noted below? Thanks -----Original Message----- Sounds like your Display Adapter driver is no longer being properly recognised, is incorrectly set-up, or is corrupted. Boot into Safe Mode and in Device Manager, 'Remove' any/all Display Adapters and Monitors and then re-boot. WinMe *should* re-detect (Plug&Play) your video card and monitor and then should install the 'correct' drivers. If it still doesn't help, you'll need to install the latest WinMe driver for your Video Card (Adapter) which you should be available to download from the card manufacturers web site. HTH and good luck Mart "Jasmine" wrote in message .. . The system will not allow me to change the display settings. Everytime I press the apply button to increase the pixels, the system prompts me to restart the computer. The settings do not change. Any suggestions? . . |
#6
|
|||
|
|||
Mmmm.. just a Wild A..ed Guess, but being a laptop, is there an option in
the BIOS to change from 640 x 480 to 800 x 600 screen display? I have (had - but a long story g) a Toshiba Tecra 8000 laptop (circa. similar to yours) which needs to be adjusted this way to permit 800 x 600 display. However, you do 'seem' to suggest that you can actually achieve an 800 x 600 resolution but can't maintain it after a re-boot? In which case, I just wonder if you may need to try the process a couple of times in an effort to flush the registry of 'corrupted' (pnp) enumerations and perhaps look to see if you have any other old driver remnants on your hard drive - check the ..windows\inf sub-folders Mart " wrote in message ... Thanks for the help, but alas, the problem persists. I found the original NeoMagic MagicGraph XD driver at the Dell site (listed as for Win98) and brought it down. I uninstalled everything I could find in Device Manager while in Safe Mode. Rebooted, Windows identified the missing drivers and I led it to the Dell driver. Rebooted. Same old small screen. Changed the screen to 800 x 600. Rebooted. Same old small screen. Rebooted in Safe Mode. Interestingly, the 'Peformance Tab' tells me that I am running paging in MSDOS compatibility mode because some kind of driver was loaded by config.sys (which has NOTHING in it) and / or by autoexec.bat which only has a couple of window dir commands. So we are still stuck with a slow performing, tiny screen windows machine. This is worse than being a freshman wizard at Hogwarts, try ing spells and getting unrelated results. -----Original Message----- How exactly does one 'remove' the adapter, you noted below? By booting into Safe Mode and then opening Device Manager and use the 'Remove' option to delete - or more accurately 'remove' - any/all Display Adapters. (You will probably find 'several' there - whereas you'd only find one in Normal Mode - hence the need to do it in Safe Mode) When you re-boot, WinMe will detect that drivers are required and you must point it to the original NeoMagic (or whatever was supplied by Dell) drivers, BEFORE WinMe tries to install its own default drivers. Confirm that you do have the correct WinMe compatible drivers for your specific laptop model by checking their availability on Dell's website. Mart " wrote in message ... We have a similar problem with our Dell Latitude laptop. AFter installing the final MS Windows ME software update, our display went to 640x480-16 and refuses to change back to any larger size. We've tried everything including going back to the VGA adapter, then upgrading to the NeoMagic 128XD driver from 1999 and then the Microsoft one from 2000, all to no avail. There must be some farfle in the .ini files, registry, or driver configs that was a leftover from the upgrade (same on me for doing that right?). How exactly does one 'remove' the adapter, you noted below? Thanks -----Original Message----- Sounds like your Display Adapter driver is no longer being properly recognised, is incorrectly set-up, or is corrupted. Boot into Safe Mode and in Device Manager, 'Remove' any/all Display Adapters and Monitors and then re-boot. WinMe *should* re-detect (Plug&Play) your video card and monitor and then should install the 'correct' drivers. If it still doesn't help, you'll need to install the latest WinMe driver for your Video Card (Adapter) which you should be available to download from the card manufacturers web site. HTH and good luck Mart "Jasmine" wrote in message . .. The system will not allow me to change the display settings. Everytime I press the apply button to increase the pixels, the system prompts me to restart the computer. The settings do not change. Any suggestions? . . |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
windows explorer left pane no display | Jon | Monitors & Displays | 1 | July 18th 04 08:44 PM |
Major Problem | Matty | General | 3 | July 4th 04 05:02 PM |
deleted explorer.exe | Anida | Software & Applications | 20 | June 16th 04 06:21 AM |
Windows update | Kevin McCarthy | General | 5 | May 29th 04 10:36 PM |
Windows ME explorer display | PD Johnston | General | 0 | May 26th 04 12:48 PM |