A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Cardbuss Cause of No Detection?



 
 
Thread Tools Display Modes
  #11  
Old February 26th 21, 12:03 PM posted to microsoft.public.win98.gen_discussion
[email protected]
External Usenet User
 
Posts: 126
Default Cardbuss Cause of No Detection?

SNIP
The modem PC Card was NOT a problem (detection, etc)
I indicated the Megahertz PC card modem works AOK so
you know that the PC card slot is NOT defective.

My MAIN OBJECTIVE is for Win98 to detect a PC card
adapter with a USB port because I have the Win98
driver for that adapter, but Win98 MUST detect New
Hardware before I can install the adapter driver.
That is in the adapter's instructions.

Again, Thank You for your help, John


You mean, like the maximus decim driver.

nusb31e__maximus_decim_win98.exe 759,296 bytes

From the readme in there.

"Maximus Decim Native USB ver.3.1

Only for Windows 98SE English !!!

*Native (without installation of additional drivers
for each type) support USB flash drives, digital
photo and videocameras and other similar devices.
*Universal Stack USB 2.0 (without installation
of additional drivers for each chipsets) with uninstall.

1.Remove ALL drivers USB flash drives.
2.Remove ALL drivers USB 2.0 controllers.
3.Remove ALL unknown devices.
4.Install NUSB 3.1 and reboot.
5.After detection new USB 2.0 controllers
(if it will occur) too it is necessary to be reboot.

Remember! You install it at own risk!
"

Hi Paul,

I downloaded "nusb31e.exe" and will give it a try.

Since the external floppy drive is defective, I use
"PC Link" (like LapLink) to transfer "stuff" to this small Toshiba laptop.

Having a working USB adapter would be AWESOME.

Again Thanks John

  #12  
Old February 26th 21, 03:20 PM posted to microsoft.public.win98.gen_discussion
[email protected]
External Usenet User
 
Posts: 126
Default Cardbuss Cause of No Detection?

SNIP
You mean, like the maximus decim driver.

nusb31e__maximus_decim_win98.exe 759,296 bytes

From the readme in there.

"Maximus Decim Native USB ver.3.1

Only for Windows 98SE English !!!

*Native (without installation of additional drivers
for each type) support USB flash drives, digital
photo and videocameras and other similar devices.
*Universal Stack USB 2.0 (without installation
of additional drivers for each chipsets) with uninstall.

1.Remove ALL drivers USB flash drives.
2.Remove ALL drivers USB 2.0 controllers.
3.Remove ALL unknown devices.
4.Install NUSB 3.1 and reboot.
5.After detection new USB 2.0 controllers
(if it will occur) too it is necessary to be reboot.

Remember! You install it at own risk!
"

Hi Paul,

I downloaded "nusb31e.exe" and will give it a try.

Since the external floppy drive is defective, I use
"PC Link" (like LapLink) to transfer "stuff" to this small Toshiba laptop.

Having a working USB adapter would be AWESOME.

Hi Paul,

UPDATE:

Since this small Toshiba 610CT does NOT have a USB port,
if it did, I would NOT bother with the PC Card to USB port
adapter. With DEFECTIVE external FDDs (two) made for
this laptop, the ONLY way (without removing HD) I can put
"stuff" (updated files, etc.) on it, is using "PC Link", but that requires
connecting a LapLink LPT cable to another PC. Not very
convenient, but only method I know.

Even though "nusb31e.exe" does NOT solve my adapter
DETECTION problem, I will keep it. Note: I have several
Lexar USB flash drives with the Win98 driver.

I have considered buying an external 3.5" FDD that connects
to the LPT port, but if I knew with confidence, it is in GOOD condition,
I would pay $103.** for it.

BTW: I could buy anther external FDD for this model laptop, but
the FDD uses a belt. I went through a lot of trouble replacing the
belt in one, but it did not last very long.

Thanks again for all your help, John

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Scandisk detection Larry[_4_] General 4 December 1st 08 10:37 PM
Hardware Detection always hangs on 28% rpgs rock dvds Setup & Installation 0 June 17th 08 01:47 PM
new detection rules for SpyBot siljaline General 0 March 6th 06 05:52 AM
MS GDI + Detection Tool richard kelly General 33 September 28th 04 03:18 AM
No Modem Detection DBarselow Networking 1 June 9th 04 02:50 AM


All times are GMT +1. The time now is 06:03 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 Win98banter.
The comments are property of their posters.