If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
USB hanging problem
I changed the printer on the 98se machine and also removed the scanner. The
PC hangs on start-up on the sky windows98 screen. The only way to get it to start is to go into the device manager before shutting down and remove the usb hub. It then starts ok and installs the hub, printer and modem. Any suggestions? Thanks |
#2
|
|||
|
|||
USB hanging problem
"Rob" wrote in message ... I changed the printer on the 98se machine and also removed the scanner. The PC hangs on start-up on the sky windows98 screen. The only way to get it to start is to go into the device manager before shutting down and remove the usb hub. It then starts ok and installs the hub, printer and modem. Any suggestions? Thanks Try viewing http://www.usbman.com/ and scroll down to you see your operating system listed on the left hand of the page. If you can't fix the problem from this site, then I don't think that you will, other than a complete reload! Alan |
#3
|
|||
|
|||
USB hanging problem
"Rob" wrote in message ... I changed the printer on the 98se machine and also removed the scanner. The PC hangs on start-up on the sky windows98 screen. The only way to get it to start is to go into the device manager before shutting down and remove the usb hub. It then starts ok and installs the hub, printer and modem. Any suggestions? Thanks Try booting up with the printer unplugged... and if it boots...just plug the printer in once windows loads |
#4
|
|||
|
|||
USB hanging problem
Start the computer in Safe mode by tapping the F8 key repeatedly during
bootup, then go to "Control Panel", "System", "Device Manager", expand "Universal Serial Bus controllers" and see if there are any unused printer or scanner drivers. If so, remove them, then restart normally. Ben "Rob" wrote in message ... I changed the printer on the 98se machine and also removed the scanner. The PC hangs on start-up on the sky windows98 screen. The only way to get it to start is to go into the device manager before shutting down and remove the usb hub. It then starts ok and installs the hub, printer and modem. Any suggestions? Thanks |
#5
|
|||
|
|||
USB hanging problem
Removed everything like that - does not help.
Ben Myers wrote: Start the computer in Safe mode by tapping the F8 key repeatedly during bootup, then go to "Control Panel", "System", "Device Manager", expand "Universal Serial Bus controllers" and see if there are any unused printer or scanner drivers. If so, remove them, then restart normally. Ben "Rob" wrote in message ... I changed the printer on the 98se machine and also removed the scanner. The PC hangs on start-up on the sky windows98 screen. The only way to get it to start is to go into the device manager before shutting down and remove the usb hub. It then starts ok and installs the hub, printer and modem. Any suggestions? Thanks |
#6
|
|||
|
|||
USB hanging problem
philo wrote:
"Rob" wrote in message ... I changed the printer on the 98se machine and also removed the scanner. The PC hangs on start-up on the sky windows98 screen. The only way to get it to start is to go into the device manager before shutting down and remove the usb hub. It then starts ok and installs the hub, printer and modem. Any suggestions? Thanks Try booting up with the printer unplugged... and if it boots...just plug the printer in once windows loads Not the answer. Actually, when I had the scanner attached I had to have the scanner pluged in for it to start. I could then unplug it and plug in cameras, MP3 players etc. |
#7
|
|||
|
|||
USB hanging problem
Alan wrote:
"Rob" wrote in message ... I changed the printer on the 98se machine and also removed the scanner. The PC hangs on start-up on the sky windows98 screen. The only way to get it to start is to go into the device manager before shutting down and remove the usb hub. It then starts ok and installs the hub, printer and modem. Any suggestions? Thanks Try viewing http://www.usbman.com/ and scroll down to you see your operating system listed on the left hand of the page. If you can't fix the problem from this site, then I don't think that you will, other than a complete reload! Alan Thanks that looks useful. |
#8
|
|||
|
|||
USB hanging problem
On Sat, 2 Dec 2006 09:08:57 -0000, "Rob"
put finger to keyboard and composed: I changed the printer on the 98se machine and also removed the scanner. The PC hangs on start-up on the sky windows98 screen. The only way to get it to start is to go into the device manager before shutting down and remove the usb hub. It then starts ok and installs the hub, printer and modem. Any suggestions? Thanks Enable a bootlog by hitting F8 during bootup and then selecting logged mode from the menu. This will create a bootlog.txt file in your root directory. Could it be that Windows hangs when attempting to load an orphaned ..vxd scanner/printer module ??? If so, then hopefully the last lines of bootlog.txt will identify it. - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
#9
|
|||
|
|||
USB hanging problem
Franc Zabkar wrote:
On Sat, 2 Dec 2006 09:08:57 -0000, "Rob" put finger to keyboard and composed: I changed the printer on the 98se machine and also removed the scanner. The PC hangs on start-up on the sky windows98 screen. The only way to get it to start is to go into the device manager before shutting down and remove the usb hub. It then starts ok and installs the hub, printer and modem. Any suggestions? Thanks Enable a bootlog by hitting F8 during bootup and then selecting logged mode from the menu. This will create a bootlog.txt file in your root directory. Could it be that Windows hangs when attempting to load an orphaned .vxd scanner/printer module ??? If so, then hopefully the last lines of bootlog.txt will identify it. - Franc Zabkar Good point. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
USB driver problem with Win98SE | Don Eagle | Printing | 16 | October 29th 06 07:50 PM |
UPDATE: Same Type of Problem with both Floppy Drive & CD Rom Drive!!! | Brad | Disk Drives | 0 | September 17th 06 12:46 PM |
Win98 SE Shut Down problem | KOBE | General | 2 | January 3rd 05 02:32 AM |
Can NOt Drag Icons after a short time of use. | Justin Baker | Improving Performance | 11 | July 12th 04 07:35 PM |
system hanging | mark landman | General | 0 | June 1st 04 04:41 AM |