If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Need Help Migrating
mike Oct 25, 11:29 am show options
Newsgroups: microsoft.public.win98.gen From: "mike" - Find messages by this author Date: 25 Oct 2005 08:29:21 -0700 Local: Tues, Oct 25 2005 11:29 am Subject: Need Help Migrating Reply | Reply to Author | Forward | Print | Individual Message | Show original | Remove | Report Abuse My present computer is running W98. It has a floppy drive and a 100MB Zip drive. It also has a couple of USB ports. I have purchased a new computer that has a CD RW drive and a DVD RW drive. My plan was to use a 512MB Flash Key to transfer date from the old computer to the new computer. On the old computer when I am in Windows Explorer and plug the Flash Key into a USB port it does not show as a new device on the computer. So now I am at a loss as to how to migrate my data from one computer to the other. How do I get the old computer to recognize the Flash Key? Thanks for any and all help. |
#2
|
|||
|
|||
Need Help Migrating
windows 98 has no native support for usb devices,
you must install the device driver from the manufacturer of the device, either the included cd, or the manufacturers web site. Some manufacturers do not provide drivers for windows 98 there may be a generic driver at driverguide.com that will operate your device, there may not. -- Adaware http://www.lavasoft.de spybot http://security.kolla.de AVG free antivirus http://www.grisoft.com Etrust/Vet/CA.online Antivirus scan http://www3.ca.com/securityadvisor/virusinfo/scan.aspx Panda online AntiVirus scan http://www.pandasoftware.com/ActiveScan/ Catalog of removal tools (1) http://www.pandasoftware.com/download/utilities/ Catalog of removal tools (2) http://www3.ca.com/securityadvisor/n...aspx?CID=40387 Trouble Shooting guide to Windows http://mvps.org/winhelp2002/ Blocking Unwanted Parasites with a Hosts file http://mvps.org/winhelp2002/hosts.htm links provided as a courtesy, read all instructions on the pages before use Grateful thanks to the authors/webmasters _ "mike" wrote in message oups.com... mike Oct 25, 11:29 am show options Newsgroups: microsoft.public.win98.gen From: "mike" - Find messages by this author Date: 25 Oct 2005 08:29:21 -0700 Local: Tues, Oct 25 2005 11:29 am Subject: Need Help Migrating Reply | Reply to Author | Forward | Print | Individual Message | Show original | Remove | Report Abuse My present computer is running W98. It has a floppy drive and a 100MB Zip drive. It also has a couple of USB ports. I have purchased a new computer that has a CD RW drive and a DVD RW drive. My plan was to use a 512MB Flash Key to transfer date from the old computer to the new computer. On the old computer when I am in Windows Explorer and plug the Flash Key into a USB port it does not show as a new device on the computer. So now I am at a loss as to how to migrate my data from one computer to the other. How do I get the old computer to recognize the Flash Key? Thanks for any and all help. |
#3
|
|||
|
|||
Need Help Migrating
As Bob says, check with the manufacturer for a driver for the flash key. If
one isn't available, remove the hard drive from the old machine. Undo the ribbon cable to the DVD and CDRW drives in the new machine and hook the old drive up to it watching which way the stripe on the cable is facing. Hook up a power plug and then plug in the new computer and boot. You can just set the drive on its end while using Explorer to transfer the data. Be sure to ground yourself to the case before touching any hardware. Any problems, post back. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "mike" wrote in message oups.com... mike Oct 25, 11:29 am show options Newsgroups: microsoft.public.win98.gen From: "mike" - Find messages by this author Date: 25 Oct 2005 08:29:21 -0700 Local: Tues, Oct 25 2005 11:29 am Subject: Need Help Migrating Reply | Reply to Author | Forward | Print | Individual Message | Show original | Remove | Report Abuse My present computer is running W98. It has a floppy drive and a 100MB Zip drive. It also has a couple of USB ports. I have purchased a new computer that has a CD RW drive and a DVD RW drive. My plan was to use a 512MB Flash Key to transfer date from the old computer to the new computer. On the old computer when I am in Windows Explorer and plug the Flash Key into a USB port it does not show as a new device on the computer. So now I am at a loss as to how to migrate my data from one computer to the other. How do I get the old computer to recognize the Flash Key? Thanks for any and all help. |
#4
|
|||
|
|||
Need Help Migrating
With their Service Packs installed, Windows 98 SE and Windows Me both support
USB 2.0 - but only if you install the "OrangeWare" device drivers. Microsoft does not supply drivers for USB 2.0 in Windows 98 SE or Windows Me, as the article at the following link states, but third parties do. - See http://www.orangeware.com/. One thing to note is that there are 5 brands of USB 2.0 chipsets: ALi, Intel, NEC, SiS, and VIA. Orangeware USB 2.0 drivers, which are written for one of those chipsets, will also work in the same brand of chipset. In other words, you don't always have to get Orangeware drivers from a USB card or motherboard maker - you can "borrow" from another maker. Eric, PC Buyer Beware! http://www.pcbuyerbeware.co.uk/ "mike" wrote: mike Oct 25, 11:29 am show options Newsgroups: microsoft.public.win98.gen From: "mike" - Find messages by this author Date: 25 Oct 2005 08:29:21 -0700 Local: Tues, Oct 25 2005 11:29 am Subject: Need Help Migrating Reply | Reply to Author | Forward | Print | Individual Message | Show original | Remove | Report Abuse My present computer is running W98. It has a floppy drive and a 100MB Zip drive. It also has a couple of USB ports. I have purchased a new computer that has a CD RW drive and a DVD RW drive. My plan was to use a 512MB Flash Key to transfer date from the old computer to the new computer. On the old computer when I am in Windows Explorer and plug the Flash Key into a USB port it does not show as a new device on the computer. So now I am at a loss as to how to migrate my data from one computer to the other. How do I get the old computer to recognize the Flash Key? Thanks for any and all help. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Migrating very large files over a LAN | ng_reader | General | 16 | September 7th 05 10:45 PM |