If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Upgrade
[Crossposted to WinME General]
rotten stuff in Denmark Had you upgraded to IE6-SP1 before you reinstalled WinME? -- HTH - Please Reply to This Thread ~Robear Dyer (PA Bear) MS MVP-Windows (IE/OE), AH-VSOP AumHa Forums http://forum.aumha.org Protect Your PC http://www.microsoft.com/security/protect Dave Lee wrote: I am running Windows ME 4.9.3000 Build 3000 on a: Gateway Select 950 AMD Athlon 950 MHz 512 MB RAM I reinstalled Windows ME and that changed my IE back to 5.5.4134.0100. I am trying to upgrade that Internet Explorer to 6.0 and the only thing I can get is the SP-1 Service Pack. When I try to install this I get the following message: "Setup was unable to install all the components. Please close all applications and try running Setup again." When I try to run it again I get the message: "A previous installation has pending work requiring a reboot. You need to restart your computer to complete that installation before running Internet Explorer Setup. Setup will now close." I really would like to get to IE 6. How can I do that? Dave Lee |
#2
|
|||
|
|||
Upgrade
Yes, I had upgraded to SP-1 before reinstalling Windows ME. Please don't tell me that's bad news. :-} Dave Lee "PA Bear" wrote in message ... [Crossposted to WinME General] rotten stuff in Denmark Had you upgraded to IE6-SP1 before you reinstalled WinME? -- HTH - Please Reply to This Thread ~Robear Dyer (PA Bear) MS MVP-Windows (IE/OE), AH-VSOP AumHa Forums http://forum.aumha.org Protect Your PC http://www.microsoft.com/security/protect Dave Lee wrote: I am running Windows ME 4.9.3000 Build 3000 on a: Gateway Select 950 AMD Athlon 950 MHz 512 MB RAM I reinstalled Windows ME and that changed my IE back to 5.5.4134.0100. I am trying to upgrade that Internet Explorer to 6.0 and the only thing I can get is the SP-1 Service Pack. When I try to install this I get the following message: "Setup was unable to install all the components. Please close all applications and try running Setup again." When I try to run it again I get the message: "A previous installation has pending work requiring a reboot. You need to restart your computer to complete that installation before running Internet Explorer Setup. Setup will now close." I really would like to get to IE 6. How can I do that? Dave Lee |
#3
|
|||
|
|||
Upgrade
Not as bad as it might be
What you have now is 'Version Soup' - where you have some files that are relevant to IE5.5, and some that are relevant to IE6. Look here for advice on how to resolve the situation - post back BEFORE doing anything if you're uncertain, or have any questions. http://www.btinternet.com/~winnoel/ReInIE.htm (thanks for the heads-up, PAB) -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "Dave Lee" wrote in message ... Yes, I had upgraded to SP-1 before reinstalling Windows ME. Please don't tell me that's bad news. :-} Dave Lee "PA Bear" wrote in message ... [Crossposted to WinME General] rotten stuff in Denmark Had you upgraded to IE6-SP1 before you reinstalled WinME? -- HTH - Please Reply to This Thread ~Robear Dyer (PA Bear) MS MVP-Windows (IE/OE), AH-VSOP AumHa Forums http://forum.aumha.org Protect Your PC http://www.microsoft.com/security/protect Dave Lee wrote: I am running Windows ME 4.9.3000 Build 3000 on a: Gateway Select 950 AMD Athlon 950 MHz 512 MB RAM I reinstalled Windows ME and that changed my IE back to 5.5.4134.0100. I am trying to upgrade that Internet Explorer to 6.0 and the only thing I can get is the SP-1 Service Pack. When I try to install this I get the following message: "Setup was unable to install all the components. Please close all applications and try running Setup again." When I try to run it again I get the message: "A previous installation has pending work requiring a reboot. You need to restart your computer to complete that installation before running Internet Explorer Setup. Setup will now close." I really would like to get to IE 6. How can I do that? Dave Lee |
#4
|
|||
|
|||
Upgrade
Noel Paton wrote:
Not as bad as it might be What you have now is 'Version Soup' - where you have some files that are relevant to IE5.5, and some that are relevant to IE6. Look here for advice on how to resolve the situation - post back BEFORE doing anything if you're uncertain, or have any questions. http://www.btinternet.com/~winnoel/ReInIE.htm (thanks for the heads-up, PAB) Send my commission to the usual Paypal account. eg -- ~PAÞ |
#5
|
|||
|
|||
Upgrade
What's 5% of SFA?
vbg -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "PA Bear" wrote in message ... Noel Paton wrote: Not as bad as it might be What you have now is 'Version Soup' - where you have some files that are relevant to IE5.5, and some that are relevant to IE6. Look here for advice on how to resolve the situation - post back BEFORE doing anything if you're uncertain, or have any questions. http://www.btinternet.com/~winnoel/ReInIE.htm (thanks for the heads-up, PAB) Send my commission to the usual Paypal account. eg -- ~PAÞ |
#6
|
|||
|
|||
Upgrade
lol Not a lot.
Joan Noel Paton wrote: What's 5% of SFA? vbg |
#7
|
|||
|
|||
Upgrade
The advice was right on the money and I was able to get my IE 6 up and running just great. http://www.btinternet.com/~winnoel/ReInIE.htm There was one problem in the instructions: Under "Cleaning Up, and Correcting I was not able to find and install the 329115 Patch. I am still working on that. Thank you, and all the others who answered my post, very much for your help. It is encouraging to find a place to go for good help. Dave Lee "Noel Paton" wrote in message ... Not as bad as it might be What you have now is 'Version Soup' - where you have some files that are relevant to IE5.5, and some that are relevant to IE6. Look here for advice on how to resolve the situation - post back BEFORE doing anything if you're uncertain, or have any questions. http://www.btinternet.com/~winnoel/ReInIE.htm (thanks for the heads-up, PAB) -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "Dave Lee" wrote in message ... Yes, I had upgraded to SP-1 before reinstalling Windows ME. Please don't tell me that's bad news. :-} Dave Lee "PA Bear" wrote in message ... [Crossposted to WinME General] rotten stuff in Denmark Had you upgraded to IE6-SP1 before you reinstalled WinME? -- HTH - Please Reply to This Thread ~Robear Dyer (PA Bear) MS MVP-Windows (IE/OE), AH-VSOP AumHa Forums http://forum.aumha.org Protect Your PC http://www.microsoft.com/security/protect Dave Lee wrote: I am running Windows ME 4.9.3000 Build 3000 on a: Gateway Select 950 AMD Athlon 950 MHz 512 MB RAM I reinstalled Windows ME and that changed my IE back to 5.5.4134.0100. I am trying to upgrade that Internet Explorer to 6.0 and the only thing I can get is the SP-1 Service Pack. When I try to install this I get the following message: "Setup was unable to install all the components. Please close all applications and try running Setup again." When I try to run it again I get the message: "A previous installation has pending work requiring a reboot. You need to restart your computer to complete that installation before running Internet Explorer Setup. Setup will now close." I really would like to get to IE 6. How can I do that? Dave Lee |
#8
|
|||
|
|||
Upgrade
Ah - that may have been superseded by another patch.....
download and run Belarc Advisor (www.belarc.com) see what it reports about your IE patches. Then visit Windows Update, and download and install ALL the critical patches (just a couple at a time, with reboots in between batches), and re-run Belarc See what the report says then. HTH -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "Dave Lee" wrote in message ... The advice was right on the money and I was able to get my IE 6 up and running just great. http://www.btinternet.com/~winnoel/ReInIE.htm There was one problem in the instructions: Under "Cleaning Up, and Correcting I was not able to find and install the 329115 Patch. I am still working on that. Thank you, and all the others who answered my post, very much for your help. It is encouraging to find a place to go for good help. Dave Lee "Noel Paton" wrote in message ... Not as bad as it might be What you have now is 'Version Soup' - where you have some files that are relevant to IE5.5, and some that are relevant to IE6. Look here for advice on how to resolve the situation - post back BEFORE doing anything if you're uncertain, or have any questions. http://www.btinternet.com/~winnoel/ReInIE.htm (thanks for the heads-up, PAB) -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "Dave Lee" wrote in message ... Yes, I had upgraded to SP-1 before reinstalling Windows ME. Please don't tell me that's bad news. :-} Dave Lee "PA Bear" wrote in message ... [Crossposted to WinME General] rotten stuff in Denmark Had you upgraded to IE6-SP1 before you reinstalled WinME? -- HTH - Please Reply to This Thread ~Robear Dyer (PA Bear) MS MVP-Windows (IE/OE), AH-VSOP AumHa Forums http://forum.aumha.org Protect Your PC http://www.microsoft.com/security/protect Dave Lee wrote: I am running Windows ME 4.9.3000 Build 3000 on a: Gateway Select 950 AMD Athlon 950 MHz 512 MB RAM I reinstalled Windows ME and that changed my IE back to 5.5.4134.0100. I am trying to upgrade that Internet Explorer to 6.0 and the only thing I can get is the SP-1 Service Pack. When I try to install this I get the following message: "Setup was unable to install all the components. Please close all applications and try running Setup again." When I try to run it again I get the message: "A previous installation has pending work requiring a reboot. You need to restart your computer to complete that installation before running Internet Explorer Setup. Setup will now close." I really would like to get to IE 6. How can I do that? Dave Lee |
#9
|
|||
|
|||
Upgrade
I believe the files in Q329115 have been superseded by installing IE6-SP1:
http://support.microsoft.com/?kbid=329115#Win9x Crypt32.dll v5.131.2600.2162 Cryptdlg.dll v5.0.1558.6072 If Dave's installed version of these two files are later than the above, all should be well IMHO. -- ~Robear Dyer (PA Bear) MS MVP-Windows (IE/OE) Noel Paton wrote: Ah - that may have been superseded by another patch..... download and run Belarc Advisor (www.belarc.com) see what it reports about your IE patches. Then visit Windows Update, and download and install ALL the critical patches (just a couple at a time, with reboots in between batches), and re-run Belarc See what the report says then. HTH "Dave Lee" wrote in message ... The advice was right on the money and I was able to get my IE 6 up and running just great. http://www.btinternet.com/~winnoel/ReInIE.htm There was one problem in the instructions: Under "Cleaning Up, and Correcting I was not able to find and install the 329115 Patch. I am still working on that. Thank you, and all the others who answered my post, very much for your help. It is encouraging to find a place to go for good help. Dave Lee "Noel Paton" wrote in message ... Not as bad as it might be What you have now is 'Version Soup' - where you have some files that are relevant to IE5.5, and some that are relevant to IE6. Look here for advice on how to resolve the situation - post back BEFORE doing anything if you're uncertain, or have any questions. http://www.btinternet.com/~winnoel/ReInIE.htm (thanks for the heads-up, PAB) -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "Dave Lee" wrote in message ... Yes, I had upgraded to SP-1 before reinstalling Windows ME. Please don't tell me that's bad news. :-} Dave Lee "PA Bear" wrote in message ... [Crossposted to WinME General] rotten stuff in Denmark Had you upgraded to IE6-SP1 before you reinstalled WinME? -- HTH - Please Reply to This Thread ~Robear Dyer (PA Bear) MS MVP-Windows (IE/OE), AH-VSOP AumHa Forums http://forum.aumha.org Protect Your PC http://www.microsoft.com/security/protect Dave Lee wrote: I am running Windows ME 4.9.3000 Build 3000 on a: Gateway Select 950 AMD Athlon 950 MHz 512 MB RAM I reinstalled Windows ME and that changed my IE back to 5.5.4134.0100. I am trying to upgrade that Internet Explorer to 6.0 and the only thing I can get is the SP-1 Service Pack. When I try to install this I get the following message: "Setup was unable to install all the components. Please close all applications and try running Setup again." When I try to run it again I get the message: "A previous installation has pending work requiring a reboot. You need to restart your computer to complete that installation before running Internet Explorer Setup. Setup will now close." I really would like to get to IE 6. How can I do that? Dave Lee |
#10
|
|||
|
|||
Upgrade
Shouldn't be that - it was IE6SP1 I installed from the Security CD when
testing (unless they have an updated SP1 on download now?) I'll try it over the weekend and see what I can see - my test box has a fresh install of ME on it for me to play with. -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "PA Bear" wrote in message ... I believe the files in Q329115 have been superseded by installing IE6-SP1: http://support.microsoft.com/?kbid=329115#Win9x Crypt32.dll v5.131.2600.2162 Cryptdlg.dll v5.0.1558.6072 If Dave's installed version of these two files are later than the above, all should be well IMHO. -- ~Robear Dyer (PA Bear) MS MVP-Windows (IE/OE) Noel Paton wrote: Ah - that may have been superseded by another patch..... download and run Belarc Advisor (www.belarc.com) see what it reports about your IE patches. Then visit Windows Update, and download and install ALL the critical patches (just a couple at a time, with reboots in between batches), and re-run Belarc See what the report says then. HTH "Dave Lee" wrote in message ... The advice was right on the money and I was able to get my IE 6 up and running just great. http://www.btinternet.com/~winnoel/ReInIE.htm There was one problem in the instructions: Under "Cleaning Up, and Correcting I was not able to find and install the 329115 Patch. I am still working on that. Thank you, and all the others who answered my post, very much for your help. It is encouraging to find a place to go for good help. Dave Lee "Noel Paton" wrote in message ... Not as bad as it might be What you have now is 'Version Soup' - where you have some files that are relevant to IE5.5, and some that are relevant to IE6. Look here for advice on how to resolve the situation - post back BEFORE doing anything if you're uncertain, or have any questions. http://www.btinternet.com/~winnoel/ReInIE.htm (thanks for the heads-up, PAB) -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "Dave Lee" wrote in message ... Yes, I had upgraded to SP-1 before reinstalling Windows ME. Please don't tell me that's bad news. :-} Dave Lee "PA Bear" wrote in message ... [Crossposted to WinME General] rotten stuff in Denmark Had you upgraded to IE6-SP1 before you reinstalled WinME? -- HTH - Please Reply to This Thread ~Robear Dyer (PA Bear) MS MVP-Windows (IE/OE), AH-VSOP AumHa Forums http://forum.aumha.org Protect Your PC http://www.microsoft.com/security/protect Dave Lee wrote: I am running Windows ME 4.9.3000 Build 3000 on a: Gateway Select 950 AMD Athlon 950 MHz 512 MB RAM I reinstalled Windows ME and that changed my IE back to 5.5.4134.0100. I am trying to upgrade that Internet Explorer to 6.0 and the only thing I can get is the SP-1 Service Pack. When I try to install this I get the following message: "Setup was unable to install all the components. Please close all applications and try running Setup again." When I try to run it again I get the message: "A previous installation has pending work requiring a reboot. You need to restart your computer to complete that installation before running Internet Explorer Setup. Setup will now close." I really would like to get to IE 6. How can I do that? Dave Lee |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Uninstall W98 for ME (not upgrade version) | Mikael | Setup & Installation | 3 | July 26th 04 05:39 AM |
Upgrade 98 to 98 SE?? | Jim | General | 1 | June 23rd 04 03:31 AM |
How to get an upgrade from Windows ME to XP Home Edition | Kathy Newton | Software & Applications | 1 | June 11th 04 01:13 AM |
windows could not upgrade" | bill hewitt | Software & Applications | 1 | June 8th 04 11:15 PM |
unable to upgrade to Win98SE from Win95 | Rex Ripplinger | Setup & Installation | 1 | June 3rd 04 05:38 PM |