If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
SCSI controller - 'code 10'
Hi,
Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
#2
|
|||
|
|||
SCSI controller - 'code 10'
Everest Home Edition(Free):
http://www.majorgeeks.com/downloads9.html http://basconotw.mvps.org/dwnlds.htm Create a new folder named Everest and extract the contents of the download to that folder. Open the folder and double-click everest.exe to run the application. If you are not sure what next step to take, other than downloading/installing from the manufacturers support site per their instructions. Click the + next to Computer. Click Summary. On the menu bar click Report Quick Report-Summary Plain text. Save to your desktop and close Everest. Open the report on the desktop. Delete everything from Debug on down to the bottom of the page and save. Press CTRL+A to select all. Press CTRL+C to copy and close out. Open a response in this thread and press CTRL+V to paste. Post the results in a response to this thread. -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375 "Don" wrote in message ... Hi, Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
#3
|
|||
|
|||
SCSI controller - 'code 10'
Look in device manager under Display adapters. What is the name of the
adapter? If it's a generic VGA then you need to find out the hardware installed in the machine in order to locate the drivers you need. There's a utility here that can identify it: http://www.softpedia.com/get/System/...-Edition.shtml -- Jeff Richards MS MVP (Windows - Shell/User) "Don" wrote in message ... Hi, Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
#4
|
|||
|
|||
SCSI controller - 'code 10'
Jeff - Thanks for the link to Everest - am downloading now and will run it in
next day or so - my Display Adapter is an SiS6326 v146 "Jeff Richards" wrote: Look in device manager under Display adapters. What is the name of the adapter? If it's a generic VGA then you need to find out the hardware installed in the machine in order to locate the drivers you need. There's a utility here that can identify it: http://www.softpedia.com/get/System/...-Edition.shtml -- Jeff Richards MS MVP (Windows - Shell/User) "Don" wrote in message ... Hi, Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
#5
|
|||
|
|||
SCSI controller - 'code 10'
Appreciate your instructions Brian - very helpul.
Hope to post some info in a day or so. Regards Don "Brian A." wrote: Everest Home Edition(Free): http://www.majorgeeks.com/downloads9.html http://basconotw.mvps.org/dwnlds.htm Create a new folder named Everest and extract the contents of the download to that folder. Open the folder and double-click everest.exe to run the application. If you are not sure what next step to take, other than downloading/installing from the manufacturers support site per their instructions. Click the + next to Computer. Click Summary. On the menu bar click Report Quick Report-Summary Plain text. Save to your desktop and close Everest. Open the report on the desktop. Delete everything from Debug on down to the bottom of the page and save. Press CTRL+A to select all. Press CTRL+C to copy and close out. Open a response in this thread and press CTRL+V to paste. Post the results in a response to this thread. -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375 "Don" wrote in message ... Hi, Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
#6
|
|||
|
|||
SCSI controller - 'code 10'
Don wrote: Hi, Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
#7
|
|||
|
|||
SCSI controller - 'code 10'
Sorry for the delay but could not access discussion group til today...
here is the information requested using Everest... --------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------ Version EVEREST v2.20.405 Homepage http://www.lavalys.com/ Report Type Quick Report Computer O6A4P8 Generator D Operating System Microsoft Windows 98 SE 4.10.2222A (Win98 SE) Date 2006-02-03 Time 08:15 --------[ Summary ]----------------------------------------------------------------------------------------------------- Computer: Operating System Microsoft Windows 98 SE OS Service Pack - DirectX 4.09.00.0904 (DirectX 9.0c) Computer Name O6A4P8 User Name D Motherboard: CPU Type Intel Celeron-A, 400 MHz (6 x 67) Motherboard Name AOpen MX34 (3 PCI, 1 AGP, 3 SDR DIMM, Audio) Motherboard Chipset VIA VT82C694X Apollo Pro133A System Memory 128 MB (PC133 SDRAM) BIOS Type Award Modular (05/09/00) Communication Port Communications Port (COM1) Communication Port Communications Port (COM2) Communication Port ECP Printer Port (LPT1) Communication Port NetMos PCI Parallel Port (LPT2) Display: Video Adapter SiS 6326 (8 MB) 3D Accelerator SiS 86C326 Monitor Default Monitor Multimedia: Audio Adapter MPU-401-compatible Audio Adapter Sound Blaster Pro Audio Adapter VIA AC'97 Audio Controller [H] Storage: IDE Controller Primary IDE controller (dual fifo) IDE Controller Secondary IDE controller (dual fifo) IDE Controller VIA Bus Master PCI IDE Controller SCSI/RAID Controller DMX3181X ISA SCSI Host Adapter SCSI/RAID Controller EPPSCSI Miniport Driver V2.04.04 Floppy Drive GENERIC NEC FLOPPY DISK Disk Drive GENERIC IDE DISK TYPE47 Optical Drive SONY CD-ROM CDU5231 (52x CD-ROM) SMART Hard Disks Status Unknown Partitions: C: (FAT32) 7891 MB (5114 MB free) D: (FAT32) 1103 MB (1103 MB free) E: (FAT32) 10069 MB (9786 MB free) Total Size 18.6 GB (15.6 GB free) Input: Keyboard Standard 101/102-Key or Microsoft Natural Keyboard Mouse PS/2 Compatible Mouse Port Network: Network Adapter PPP Adapter. Modem D-Link DFM-562I Controllerless Modem Card #2 Modem D-Link DFM-562I Controllerless Modem Card #3 Peripherals: Printer Canon BJC-4400 USB1 Controller VIA VT83C572 PCI-USB Controller USB1 Controller VIA VT83C572 PCI-USB Controller end report thanks all for your patience and help "Don" wrote: Hi, Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
#8
|
|||
|
|||
SCSI controller - 'code 10'
You can get the motherboard video/audio drivers he
http://usa.aopen.com/tech/ Select download center on the left. Next page select Driver on the left. Next page above the list select: Motherboard and wait for it to load. MX34 and wait for it to load. Driver and wait for it to load. Download/install the drivers per the manufacturers instructions. Or If you are using a Video card: http://www.sis.com/download/download_step1.php and audio: http://us.creative.com/support/downloads/ Use the auto update link since I don't know the model # of the SB Pro. Domex SCSI/RAID Controller DMX3181X ISA SCSI If you get a popup to install korean language select no. http://www.domex.com.tw/support/driver.htm -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375 "Don" wrote in message ... Hi, Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
#9
|
|||
|
|||
SCSI controller - 'code 10'
Hi Brian,
apologies for not replying sooner - haven't been able to access the site for weeks and microsoft said this site was no longer in operation....well, here you are! (thank goodness) I am about to download the following (see below) and assume I need a 4-in1 as the others are only audio drivers? It states to remove current drivers before downloading - do I just go into Device Manager and remove the drivers listed under audio/video or am I meant to remove the entire 'motherboard drivers' listed somewhere (where?) I can only see 'motherboard resources' listed under "system devices" in DM, but surely this isn't everything associated with the new driver? Sorry this is dragging on, but I really need your assistance and appreciate your patience - thanks Brian! 4 IN 1 Driver R4.41v(a)p7 9/23/2002 1323 KB Applies to all models. This driver includes: VIA ATAPI Vendor Support Driver AGP VxD Driver IRQ Routing Miniport Driver VIA INF Driver Note: Please remove the current version in your system before you upgrade the driver. This version supported the following OS including 98SE, NT, 2000, ME, and XP etc. OS Support:Win98, Win98SE, WinME, WinNT, WinXP "Brian A." wrote: You can get the motherboard video/audio drivers he http://usa.aopen.com/tech/ Select download center on the left. Next page select Driver on the left. Next page above the list select: Motherboard and wait for it to load. MX34 and wait for it to load. Driver and wait for it to load. Download/install the drivers per the manufacturers instructions. Or If you are using a Video card: http://www.sis.com/download/download_step1.php and audio: http://us.creative.com/support/downloads/ Use the auto update link since I don't know the model # of the SB Pro. Domex SCSI/RAID Controller DMX3181X ISA SCSI If you get a popup to install korean language select no. http://www.domex.com.tw/support/driver.htm -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375 "Don" wrote in message ... Hi, Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
#10
|
|||
|
|||
SCSI controller - 'code 10'
You do not have to remove anything prior to download, you need to
uninstall the present drivers prior to installing the updated drivers. The drivers to uninstall depend on the drivers you are re-installing/updating. For the Video drivers uninstall the drivers in DM under Display/Video Adapters. Also afterwards have a look in Control Panel Add/Remove Programs for anything related to the video adapter/chip. For the Audio drivers in DM look under Sound, Video and Game Controllers. Your best bet is to boot to Safe mode and remove any/all instances of the drivers for Video and Sound, reboot and when Windows redetects them point to the folder with the new drivers as the place to install them from. -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375 "Don" wrote in message ... Hi Brian, apologies for not replying sooner - haven't been able to access the site for weeks and microsoft said this site was no longer in operation....well, here you are! (thank goodness) I am about to download the following (see below) and assume I need a 4-in1 as the others are only audio drivers? It states to remove current drivers before downloading - do I just go into Device Manager and remove the drivers listed under audio/video or am I meant to remove the entire 'motherboard drivers' listed somewhere (where?) I can only see 'motherboard resources' listed under "system devices" in DM, but surely this isn't everything associated with the new driver? Sorry this is dragging on, but I really need your assistance and appreciate your patience - thanks Brian! 4 IN 1 Driver R4.41v(a)p7 9/23/2002 1323 KB Applies to all models. This driver includes: VIA ATAPI Vendor Support Driver AGP VxD Driver IRQ Routing Miniport Driver VIA INF Driver Note: Please remove the current version in your system before you upgrade the driver. This version supported the following OS including 98SE, NT, 2000, ME, and XP etc. OS Support:Win98, Win98SE, WinME, WinNT, WinXP "Brian A." wrote: You can get the motherboard video/audio drivers he http://usa.aopen.com/tech/ Select download center on the left. Next page select Driver on the left. Next page above the list select: Motherboard and wait for it to load. MX34 and wait for it to load. Driver and wait for it to load. Download/install the drivers per the manufacturers instructions. Or If you are using a Video card: http://www.sis.com/download/download_step1.php and audio: http://us.creative.com/support/downloads/ Use the auto update link since I don't know the model # of the SB Pro. Domex SCSI/RAID Controller DMX3181X ISA SCSI If you get a popup to install korean language select no. http://www.domex.com.tw/support/driver.htm -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375 "Don" wrote in message ... Hi, Hope someone can help? Have a problem - my system started in safemode so I restarted it but the display had altered (ghost-like and colours altered but settings unchanged). Looked in Device manager and have the yellow exclamation mark under "SCSI Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for EPPSCSI miniport driver - all ok). Under resources tab says code 10 - device drivers either not present or not working properly. Have searched everywhere to reinstall but can't find the original driver in my system. Anyway, is this affecting the display or is this 'host adapter' only related to my scanner? I'm confused! I need to get my display happening again and can't. Where can I get new drivers for that and what info do you need to help? Many thanks for any assistance. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Boot | KB | General | 8 | May 15th 05 11:39 PM |
WinMe conflict w/ Intel 82371 AB/EB PCI Bus Master IDE Controller | Fernando Reyes | Hardware | 2 | September 22nd 04 12:46 AM |
Please help! Display settings !! | Mitzi | Monitors & Displays | 12 | July 11th 04 05:19 AM |
Seeking SCSI controller driver | Joe | Setup & Installation | 1 | June 11th 04 10:57 PM |
IDE Controller Error (Code 10) | Graham Womack | General | 6 | June 5th 04 10:25 PM |