If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Question re USB features on win98se PC
On Wed, 18 Jun 2008 16:43:10 +1000, "Jason James" put
finger to keyboard and composed: I have just one more question re the USB facilities on my 98se PC. After I successfully plugged a new KB into 1 of 2 USB ports on the rear panel, (initially I thought there was only one) I was looking at some cheap printer/scanners etc for $69. But like all peripherals these days they are USB. I understand that a converter adapter may get me back into the parallel port,.. Not long ago I bought a new Brother HL2040 monochrome laser printer with parallel and USB interfaces (AU$88) which installed flawlessly on an old 486/Win95 box. - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
#12
|
|||
|
|||
Question re USB features on win98se PC
Gary,
The printer is a Hewlett Packard PSC 1410v (Printer/Scanner/Copier) and all funtions work. "Gary S. Terhune" wrote: What model HP printer do you have? -- Gary S. Terhune MS-MVP Shell/User http://grystmill.com "dlsayremn" wrote in message ... Jason, My Gateway 98SE has only two USB ports on the back. On one I have a 4 port adaptor with Boston USB speakers and USB KB with USB mouse. The other I have a 4 port adaptor with USR wireless adaptor and USB connector for a 3 year old HP 1410v PSC. This works. Ron is right about support for 98 at HP, not sure about any one else. I went to get updated drivers for my printer and could not access any updates for ME/98SE/98 even though they were listed and I was able to get them 2 months ago. So be sure to check the box to see if the printer you buy will work with 98SE. DLSayre "Jason James" wrote: I have just one more question re the USB facilities on my 98se PC. After I successfully plugged a new KB into 1 of 2 USB ports on the rear panel, (initially I thought there was only one) I was looking at some cheap printer/scanners etc for $69. But like all peripherals these days they are USB. I understand that a converter adapter may get me back into the parallel port,..but before that decision I had a look at "System Properties" then "Device manager" then opened 3 headings under "USB Controllers" 1st Intel 82371AB/EB PCI to USBUniversal Host Controller (exists in all hardware profiles) 2nd USB Composite Device (exists in all hardware profiles) 3rd USB Root hub (exists in all hardware profiles) ----------------------------------------------------------------- Does this info indicate anything meaningfull about the 2 USB ports on the PC, in particular whether a printer can be connected to second USB, or whether a piggy back to the 1st (which currently has the KB). TIA,..Jason Jason |
#13
|
|||
|
|||
Question re USB features on win98se PC
Right, but he can get a (slightly) older one that does.
I'm using the HP Laserjet 1018, and deliberately selected that one over the newer HP Laserjet 1020 for that reason - I can use it with either my WinXP OR my Win98SE computer (which has a USB 2.0 PCI card inside, too). (I don't have any real need for InkJets (and having to replace those cartridges all the time), so at least that was a non-issue for me). Ron Badour wrote: You are probably not going to find any new printers that have W98SE drivers. For example, see this HP article: http://h10025.www1.hp.com/ewfrf/wc/d...=441125&dlc=en -- Regards Ron Badour MS MVP 1997 - 2008 "Jason James" wrote in message ... I have just one more question re the USB facilities on my 98se PC. After I successfully plugged a new KB into 1 of 2 USB ports on the rear panel, (initially I thought there was only one) I was looking at some cheap printer/scanners etc for $69. But like all peripherals these days they are USB. I understand that a converter adapter may get me back into the parallel port,..but before that decision I had a look at "System Properties" then "Device manager" then opened 3 headings under "USB Controllers" 1st Intel 82371AB/EB PCI to USBUniversal Host Controller (exists in all hardware profiles) 2nd USB Composite Device (exists in all hardware profiles) 3rd USB Root hub (exists in all hardware profiles) ----------------------------------------------------------------- Does this info indicate anything meaningfull about the 2 USB ports on the PC, in particular whether a printer can be connected to second USB, or whether a piggy back to the 1st (which currently has the KB). TIA,..Jason Jason |
#14
|
|||
|
|||
Question re USB features on win98se PC
Sorry, that was a senior moment. Never mind.
-- Gary S. Terhune MS-MVP Shell/User http://grystmill.com "dlsayremn" wrote in message ... Gary, The printer is a Hewlett Packard PSC 1410v (Printer/Scanner/Copier) and all funtions work. "Gary S. Terhune" wrote: What model HP printer do you have? -- Gary S. Terhune MS-MVP Shell/User http://grystmill.com "dlsayremn" wrote in message ... Jason, My Gateway 98SE has only two USB ports on the back. On one I have a 4 port adaptor with Boston USB speakers and USB KB with USB mouse. The other I have a 4 port adaptor with USR wireless adaptor and USB connector for a 3 year old HP 1410v PSC. This works. Ron is right about support for 98 at HP, not sure about any one else. I went to get updated drivers for my printer and could not access any updates for ME/98SE/98 even though they were listed and I was able to get them 2 months ago. So be sure to check the box to see if the printer you buy will work with 98SE. DLSayre "Jason James" wrote: I have just one more question re the USB facilities on my 98se PC. After I successfully plugged a new KB into 1 of 2 USB ports on the rear panel, (initially I thought there was only one) I was looking at some cheap printer/scanners etc for $69. But like all peripherals these days they are USB. I understand that a converter adapter may get me back into the parallel port,..but before that decision I had a look at "System Properties" then "Device manager" then opened 3 headings under "USB Controllers" 1st Intel 82371AB/EB PCI to USBUniversal Host Controller (exists in all hardware profiles) 2nd USB Composite Device (exists in all hardware profiles) 3rd USB Root hub (exists in all hardware profiles) ----------------------------------------------------------------- Does this info indicate anything meaningfull about the 2 USB ports on the PC, in particular whether a printer can be connected to second USB, or whether a piggy back to the 1st (which currently has the KB). TIA,..Jason Jason |
#15
|
|||
|
|||
Question re USB features on win98se PC
The point is, no matter what printer you have, if your OS is older than XP,
you'd better be making sure you have all your drivers on hand and backed up twice, because finding them on the internet will be more and more difficult, or even impossible. Right now, it's HP, but the others are sure to follow. For instance, I bet you can't find anywhere to download 9x drivers for your new printer. Make three copies of whatever drivers you have for that thing, put one in your usual library, tape one to the side of the 98 computer (or inside the case) and put one in your safe deposit box, because that printer is liable to outlive you and your heir might turn out to be a "98 enthusiast". I took apart the new installer for the Deskjet 5400 series and while I could avoid installing most of the software and just "bare install" the thing to XP, no can do for 9x systems. -- Gary S. Terhune MS-MVP Shell/User http://grystmill.com "Bill in Co." wrote in message ... Right, but he can get a (slightly) older one that does. I'm using the HP Laserjet 1018, and deliberately selected that one over the newer HP Laserjet 1020 for that reason - I can use it with either my WinXP OR my Win98SE computer (which has a USB 2.0 PCI card inside, too). (I don't have any real need for InkJets (and having to replace those cartridges all the time), so at least that was a non-issue for me). Ron Badour wrote: You are probably not going to find any new printers that have W98SE drivers. For example, see this HP article: http://h10025.www1.hp.com/ewfrf/wc/d...=441125&dlc=en -- Regards Ron Badour MS MVP 1997 - 2008 "Jason James" wrote in message ... I have just one more question re the USB facilities on my 98se PC. After I successfully plugged a new KB into 1 of 2 USB ports on the rear panel, (initially I thought there was only one) I was looking at some cheap printer/scanners etc for $69. But like all peripherals these days they are USB. I understand that a converter adapter may get me back into the parallel port,..but before that decision I had a look at "System Properties" then "Device manager" then opened 3 headings under "USB Controllers" 1st Intel 82371AB/EB PCI to USBUniversal Host Controller (exists in all hardware profiles) 2nd USB Composite Device (exists in all hardware profiles) 3rd USB Root hub (exists in all hardware profiles) ----------------------------------------------------------------- Does this info indicate anything meaningfull about the 2 USB ports on the PC, in particular whether a printer can be connected to second USB, or whether a piggy back to the 1st (which currently has the KB). TIA,..Jason Jason |
#16
|
|||
|
|||
Question re USB features on win98se PC
On Wed, 18 Jun 2008 10:21:37 -0700, "Gary S. Terhune" none wrote:
What you see in Device manager is what you'd see for that double-port, to answer one of your questions. The first device is the USB controller on the motherboard, the second item is the part keyboard itself, the Hub it the unit that is connected to and mounted right on the mobo in this case. The hub has two ports. As for printers... Those USB ports on your machine are almost certainly USB 1.1 and that means slow. Since things like printers have gotten used to straight network connection or fast USB2, even with an Parallel port adapter, and assuming there are even drivers for your system, they aren't likely to work well if at all. That's not my experience. I am currently using a Canon iP3000 on a Dell Latitude CPi laptop (P2-300) with USB1.1 port, and there are neither dramas nor perceptible bottlenecks. |
#17
|
|||
|
|||
Question re USB features on win98se PC
"who where" wrote in message
... On Wed, 18 Jun 2008 10:21:37 -0700, "Gary S. Terhune" none wrote: What you see in Device manager is what you'd see for that double-port, to answer one of your questions. The first device is the USB controller on the motherboard, the second item is the part keyboard itself, the Hub it the unit that is connected to and mounted right on the mobo in this case. The hub has two ports. As for printers... Those USB ports on your machine are almost certainly USB 1.1 and that means slow. Since things like printers have gotten used to straight network connection or fast USB2, even with an Parallel port adapter, and assuming there are even drivers for your system, they aren't likely to work well if at all. That's not my experience. I am currently using a Canon iP3000 on a Dell Latitude CPi laptop (P2-300) with USB1.1 port, and there are neither dramas nor perceptible bottlenecks. No, it's just slow all around. Drama comes when one part is slow and the other part expects fast. If you'll check that model's specs, though, it says nothing about USB2, and if it were a USB2 capable machine, it would say so. (If you don't believe that, check out the specs for newer models in the same line at Canon.com, say the IP3500.) IOW, your printer was built for USB1.1. It was also relatively expensive, from what I can discern. That IP3500 is more in line with what the OP says he's looking at -- CHEAP printers. In any case, I wasn't stating a rule, just a generality for which you have provided an excellent exception. Too bad you can't buy them anymore. -- Gary S. Terhune MS-MVP Shell/User http://grystmill.com |
#18
|
|||
|
|||
Question re USB features on win98se PC
But a somewhat related question might be:
For a printer, though, how much difference does it make if it uses USB 1.1 or USB 2.0? Just wondering - I would think a printer is so slow anyways, it wouldn't matter (but that's just for a printer). Gary S. Terhune wrote: "who where" wrote in message ... On Wed, 18 Jun 2008 10:21:37 -0700, "Gary S. Terhune" none wrote: What you see in Device manager is what you'd see for that double-port, to answer one of your questions. The first device is the USB controller on the motherboard, the second item is the part keyboard itself, the Hub it the unit that is connected to and mounted right on the mobo in this case. The hub has two ports. As for printers... Those USB ports on your machine are almost certainly USB 1.1 and that means slow. Since things like printers have gotten used to straight network connection or fast USB2, even with an Parallel port adapter, and assuming there are even drivers for your system, they aren't likely to work well if at all. That's not my experience. I am currently using a Canon iP3000 on a Dell Latitude CPi laptop (P2-300) with USB1.1 port, and there are neither dramas nor perceptible bottlenecks. No, it's just slow all around. Drama comes when one part is slow and the other part expects fast. If you'll check that model's specs, though, it says nothing about USB2, and if it were a USB2 capable machine, it would say so. (If you don't believe that, check out the specs for newer models in the same line at Canon.com, say the IP3500.) IOW, your printer was built for USB1.1. It was also relatively expensive, from what I can discern. That IP3500 is more in line with what the OP says he's looking at -- CHEAP printers. In any case, I wasn't stating a rule, just a generality for which you have provided an excellent exception. Too bad you can't buy them anymore. -- Gary S. Terhune MS-MVP Shell/User http://grystmill.com |
#19
|
|||
|
|||
Question re USB features on win98se PC
"Bill in Co." wrote in message ... | But a somewhat related question might be: | For a printer, though, how much difference does it make if it uses USB 1.1 | or USB 2.0? Just wondering - I would think a printer is so slow anyways, | it wouldn't matter (but that's just for a printer). That seems like a viable comment. The printers own buffer/memory is used to hold the materials on a first in first out basis, and is replaced everytime a segment becomes free. Taken with the print spooler [which is the first actual delay as the printer software converts doc/graphic code to printer code and stores/preps it], the delay from a USB1.1 verses 2.0 would seem to be negligable unless one had a super fast printer and/or perhaps a massively intracate/high def or excessively large graphic print job or mixed *complex* project, or a printer with limited memory. Then again, it appears the printer manufactures are off-loading more of the printer's prior [hardware] activities back upon the system. I could see, however, a bottleneck in the USB if mutiple devices were being used, at the same time, on the same base channel. -- MEB http://peoplescounsel.orgfree.com -- _________ | | Gary S. Terhune wrote: | "who where" wrote in message | ... | On Wed, 18 Jun 2008 10:21:37 -0700, "Gary S. Terhune" none wrote: | | What you see in Device manager is what you'd see for that double-port, | to | answer one of your questions. The first device is the USB controller on | the | motherboard, the second item is the part keyboard itself, the Hub it the | unit that is connected to and mounted right on the mobo in this case. | The | hub has two ports. | | As for printers... Those USB ports on your machine are almost certainly | USB 1.1 and that means slow. Since things like printers have gotten used | to | straight network connection or fast USB2, even with an Parallel port | adapter, and assuming there are even drivers for your system, they | aren't | likely to work well if at all. | | That's not my experience. I am currently using a Canon iP3000 on a Dell | Latitude CPi laptop (P2-300) with USB1.1 port, and there are neither | dramas nor perceptible bottlenecks. | | No, it's just slow all around. Drama comes when one part is slow and the | other part expects fast. If you'll check that model's specs, though, it | says | nothing about USB2, and if it were a USB2 capable machine, it would say | so. | (If you don't believe that, check out the specs for newer models in the | same | line at Canon.com, say the IP3500.) IOW, your printer was built for | USB1.1. | It was also relatively expensive, from what I can discern. That IP3500 is | more in line with what the OP says he's looking at -- CHEAP printers. | | In any case, I wasn't stating a rule, just a generality for which you have | provided an excellent exception. Too bad you can't buy them anymore. | | -- | Gary S. Terhune | MS-MVP Shell/User | http://grystmill.com | | |
#20
|
|||
|
|||
Question re USB features on win98se PC
I'm not going to try to explain it any further, because I'm just not that
technically indoctrinated in the subject and I'd make mistakes that others would jump on. All I know is I've dealt with a lot of various printers, inkjet and laser, of varying qualities, and where it was possible to compare modes of communications (parallel, USB1.1, USB2, 10/100 (and even /1000) network connections, when large files are involved, the differences are quite noticeable. These days, large files make up a lot more of the home user print usage than they used to due to their being images, not PT. And if you think printers are slow these days, think again. To get the same kinds of speeds and quality you can get today for $100 to $200, ten years ago you'd be talking top of the line commercial products costing fifteen to twenty times more. Much the same thing happens with MFPs and their scanners. Higher quality scanning is possible, the difference in speeds of various modes of communications is VERY noticeable. -- Gary S. Terhune MS-MVP Shell/User http://grystmill.com "Bill in Co." wrote in message ... But a somewhat related question might be: For a printer, though, how much difference does it make if it uses USB 1.1 or USB 2.0? Just wondering - I would think a printer is so slow anyways, it wouldn't matter (but that's just for a printer). Gary S. Terhune wrote: "who where" wrote in message ... On Wed, 18 Jun 2008 10:21:37 -0700, "Gary S. Terhune" none wrote: What you see in Device manager is what you'd see for that double-port, to answer one of your questions. The first device is the USB controller on the motherboard, the second item is the part keyboard itself, the Hub it the unit that is connected to and mounted right on the mobo in this case. The hub has two ports. As for printers... Those USB ports on your machine are almost certainly USB 1.1 and that means slow. Since things like printers have gotten used to straight network connection or fast USB2, even with an Parallel port adapter, and assuming there are even drivers for your system, they aren't likely to work well if at all. That's not my experience. I am currently using a Canon iP3000 on a Dell Latitude CPi laptop (P2-300) with USB1.1 port, and there are neither dramas nor perceptible bottlenecks. No, it's just slow all around. Drama comes when one part is slow and the other part expects fast. If you'll check that model's specs, though, it says nothing about USB2, and if it were a USB2 capable machine, it would say so. (If you don't believe that, check out the specs for newer models in the same line at Canon.com, say the IP3500.) IOW, your printer was built for USB1.1. It was also relatively expensive, from what I can discern. That IP3500 is more in line with what the OP says he's looking at -- CHEAP printers. In any case, I wasn't stating a rule, just a generality for which you have provided an excellent exception. Too bad you can't buy them anymore. -- Gary S. Terhune MS-MVP Shell/User http://grystmill.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Copy WinME features to Win98SE | Abraham | General | 5 | October 2nd 07 06:14 AM |
Win98se network question | gchandrujs via WindowsKB.com | General | 1 | December 3rd 06 04:36 PM |
Question about win98se | Nathan Gutman | General | 5 | November 7th 05 06:19 PM |
Win98se Question | Step55431 | General | 1 | October 25th 04 10:00 PM |
Problem to set up networking features in standalone Win98SE-computer | Dr.Leman | Networking | 1 | July 21st 04 01:02 PM |