If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Bios setup in Compaq Presario
This is an old Compaq Presario 8702 P166, in a recent thread, converted
from W95 to DOS. I want to get into BIOS setup. Compaq data says: ----- "NOTE: On certain Compaq Presario PCs (prior to 2002) press the F10 key at the logo screen to enter setup." ----- Pressing F10, F1, Escape, (this from other Compaq data). It continues to boot to a DOS C prompt. Can't get into Setup. Advice? ms |
#2
|
|||
|
|||
Bios setup in Compaq Presario
"ms" wrote in message ...
This is an old Compaq Presario 8702 P166, in a recent thread, converted from W95 to DOS. I want to get into BIOS setup. Compaq data says: ----- "NOTE: On certain Compaq Presario PCs (prior to 2002) press the F10 key at the logo screen to enter setup." ----- Pressing F10, F1, Escape, (this from other Compaq data). It continues to boot to a DOS C prompt. Can't get into Setup. Advice? Try other keys: F2, F11, F12, DEL, and also key combos like Ctrl+Shift+S, Ctrl+Alt+S, and other keys and combos such as found he http://www.computerhope.com/issues/ch000192.htm and http://www.inventio.co.uk/getbios.htm -- Glen Ventura, MS MVP Shell/User, A+ AumHa VSOP: http://aumha.net DTS-L.ORG: http://66.39.69.143/ |
#3
|
|||
|
|||
Bios setup in Compaq Presario
"glee" wrote in
: "ms" wrote in message ... This is an old Compaq Presario 8702 P166, in a recent thread, converted from W95 to DOS. I want to get into BIOS setup. Compaq data says: ----- "NOTE: On certain Compaq Presario PCs (prior to 2002) press the F10 key at the logo screen to enter setup." ----- Pressing F10, F1, Escape, (this from other Compaq data). It continues to boot to a DOS C prompt. Can't get into Setup. Advice? Try other keys: F2, F11, F12, DEL, and also key combos like Ctrl+Shift+S, Ctrl+Alt+S, and other keys and combos such as found he http://www.computerhope.com/issues/ch000192.htm and http://www.inventio.co.uk/getbios.htm Thanks, Glen ms |
#4
|
|||
|
|||
Bios setup in Compaq Presario
"ms" wrote in message ... "glee" wrote in : "ms" wrote in message ... This is an old Compaq Presario 8702 P166, in a recent thread, converted from W95 to DOS. I want to get into BIOS setup. Compaq data says: ----- "NOTE: On certain Compaq Presario PCs (prior to 2002) press the F10 key at the logo screen to enter setup." ----- Pressing F10, F1, Escape, (this from other Compaq data). It continues to boot to a DOS C prompt. Can't get into Setup. Advice? Try other keys: F2, F11, F12, DEL, and also key combos like Ctrl+Shift+S, Ctrl+Alt+S, and other keys and combos such as found he http://www.computerhope.com/issues/ch000192.htm and http://www.inventio.co.uk/getbios.htm Thanks, Glen I have same problem with an early Compaq laptop (P133), e.g. can't access BIOS using any key or key-combo I'm familiar with. Seems some Compaqs have their BIOS setup buried on the hard disk and as this laptop has a diff hd in it there's nothing there for the key to invoke! Can't find anything on Compaq/HP's site that helps. I did however use included form on their pages to point out to "CEO" that based upon that experience and that HP now uses the "hidden partition" method for recovery disks, I'm not even considering any of their models for new laptop purchase. I'll get one that comes with a "full usable outside that specific machine" version of the OS also or I just simply won't buy, period. I detest MS's various marketing stratagies, especially the :locked to original pc" versions of Windows. Far as I'm concerned Dell/HP/Compaq etc. should all tell MS to go f**k themselves with that crap as it clearly deceives most users regarding what they've purchased. ms |
#5
|
|||
|
|||
Bios setup in Compaq Presario
"ms" wrote in message ...
"glee" wrote in : "ms" wrote in message ... This is an old Compaq Presario 8702 P166, in a recent thread, converted from W95 to DOS. I want to get into BIOS setup. Compaq data says: ----- "NOTE: On certain Compaq Presario PCs (prior to 2002) press the F10 key at the logo screen to enter setup." ----- Pressing F10, F1, Escape, (this from other Compaq data). It continues to boot to a DOS C prompt. Can't get into Setup. Advice? Try other keys: F2, F11, F12, DEL, and also key combos like Ctrl+Shift+S, Ctrl+Alt+S, and other keys and combos such as found he http://www.computerhope.com/issues/ch000192.htm and http://www.inventio.co.uk/getbios.htm Thanks, Glen ms From HP/Compuke support: quote Pressing F10 opens the BIOS of Compaq Presario desktops 2001 and earlier. Pressing F1 opens the BIOS of the S3000 series, 6400 series, and 2002 models of Presario desktop computers. Immediately press the F10 or F1 key repeatedly on the keyboard when the logo screen displays. /quote If you're having trouble with the timing hold any key down immediately upon boot and it should produce a stuck key error with an option to go to setup. You've been around here plenty enough to know that another way is to pull the CMOS battery as another way. -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375 |
#6
|
|||
|
|||
Bios setup in Compaq Presario
I think on my old 425 Lite I had to use the esc key
mc |
#7
|
|||
|
|||
Bios setup in Compaq Presario
"glee" wrote in
: "ms" wrote in message ... This is an old Compaq Presario 8702 P166, in a recent thread, converted from W95 to DOS. I want to get into BIOS setup. Compaq data says: ----- "NOTE: On certain Compaq Presario PCs (prior to 2002) press the F10 key at the logo screen to enter setup." ----- Pressing F10, F1, Escape, (this from other Compaq data). It continues to boot to a DOS C prompt. Can't get into Setup. Advice? Try other keys: F2, F11, F12, DEL, and also key combos like Ctrl+Shift+S, Ctrl+Alt+S, and other keys and combos such as found he http://www.computerhope.com/issues/ch000192.htm and http://www.inventio.co.uk/getbios.htm Thanks for the links, saved them. I also searched the HP site, and looked at data I previously saved. Tried the following: F1, F10 these are supposed to work for Compaq. F2 ESC DEL CTRL + ALT + ESC CTRL + ALT + INS CTRL + ALT + ENTER CTRL + ALT + S PAGE UP KEY PAGE DOWN KEY No luck, this is a stubborn one. But searching on the net and in this thread, it seems not unknown that setup is tough to get into on some Compaqs. On other Compaqs, I had no trouble. If necessary, I will go on, this was only to help install DOS from the A drive. ms |
#8
|
|||
|
|||
Bios setup in Compaq Presario
"Brian A." gonefish'n@afarawaylake wrote in
: "ms" wrote in message ... "glee" wrote in : "ms" wrote in message ... This is an old Compaq Presario 8702 P166, in a recent thread, converted from W95 to DOS. I want to get into BIOS setup. Compaq data says: ----- "NOTE: On certain Compaq Presario PCs (prior to 2002) press the F10 key at the logo screen to enter setup." ----- Pressing F10, F1, Escape, (this from other Compaq data). It continues to boot to a DOS C prompt. Can't get into Setup. Advice? Try other keys: F2, F11, F12, DEL, and also key combos like Ctrl+Shift+S, Ctrl+Alt+S, and other keys and combos such as found he http://www.computerhope.com/issues/ch000192.htm and http://www.inventio.co.uk/getbios.htm Thanks, Glen ms From HP/Compuke support: quote Pressing F10 opens the BIOS of Compaq Presario desktops 2001 and earlier. Pressing F1 opens the BIOS of the S3000 series, 6400 series, and 2002 models of Presario desktop computers. Immediately press the F10 or F1 key repeatedly on the keyboard when the logo screen displays. /quote If you're having trouble with the timing hold any key down immediately upon boot and it should produce a stuck key error with an option to go to setup. You've been around here plenty enough to know that another way is to pull the CMOS battery as another way. Thanks Brian. As earlier in thread, tried above keys. With stuck key: 301- keyboard error, a small screen opens - F1 Boot, that's all. Pulling the battery is something I may have to do later on another machine. ms |
#9
|
|||
|
|||
Bios setup in Compaq Presario
For what its worth here is some general BIOS info for some systems....
http://www.informit.com/articles/art...02215&seqNum=4 this is the main page... http://www.informit.com/imprint/inde...?st=61090&rl=1 hope something works.. mc |
#10
|
|||
|
|||
Bios setup in Compaq Presario
"ms" wrote in message ...
This is an old Compaq Presario 8702 P166, in a recent thread, converted from W95 to DOS. I want to get into BIOS setup. Compaq data says: snip Download ftp://ftp.hp.com/pub/softpaq/sp02001-02500/sp2141.exe Double-click the file, page down and type "AGREE" to accept the terms of use, then type "A", insert a blank floppy and press "Enter". This should create a bootable floppy that can be used for BIOS setup. Please note that if you change the boot sequence without installing the setup program to the hard drive, you may have to reset the CMOS manually from inside the computer to change back to a floppy boot. Ben |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Compaq Presario Updates at HP site | Rvwinkle | General | 0 | December 8th 06 08:48 PM |
Anyone use a Compaq Presario 8702? | [email protected] | General | 2 | May 15th 06 06:55 PM |
compaq presario 4526 | christina | General | 28 | September 26th 05 03:50 PM |
i have a compaq presario laptop | Kokoro-zzz | Setup & Installation | 1 | June 11th 05 04:46 AM |
setup windows 98 at Compaq Presario 2500 Notebook | YEOH | Setup & Installation | 0 | July 29th 04 10:47 AM |