A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Setup & Installation
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

PPP Adapter. in winipcfg



 
 
Thread Tools Display Modes
  #1  
Old October 21st 06, 05:14 AM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
Herbert Chan
External Usenet User
 
Posts: 97
Default PPP Adapter. in winipcfg

Hello,

My pc is win98se and I have a broadband internet connection.

I have been using the broadband for a few years. And since the beginning of
this year, my internet connection will be intermittently lost. At first, I
thought something was wrong with the modem, which is terayon TA-102. I have
called the ISP to replace it. However, the problem is still there. Then I
tried to get used to it. Whenever I lose the connection, I will need to
reboot my computer to get the connection back (the modem does not need to be
flipped off then on).

I called the technical support again today, and we've looked at the modem
and it didn't appear that my modem was failing to provide a signal for me.
Then I run winipcfg and see that there are 3 entries: PPP Adapter.,
Microsoft TV/Video Connection and Realtek 8139-series PCI NIC. PPP adapter
is for dialup connection and Realtek is the network card for broadband. The
technical support girl said win98se will sometimes switch from the network
card to PPP adapter, although she doesn't know under what circumstances this
will happen. And the problem I've got is because my computer has switched
on its own accord from the network card to PPP adapter.

So are there any ways to force the computer to only use the network card so
that it will always use the network card to get online? Or how can I
uninstall ppp adapter so that the computer can't even choose to switch back
to it?

Thanks.

Herbert


  #2  
Old October 21st 06, 05:26 AM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
Brian A
External Usenet User
 
Posts: 177
Default PPP Adapter. in winipcfg

I notice you mention the NIC being a network card, just to be sure, is it an
adapter card or is it integrated on the motherboard? If it's integrated you may need
to see if you can disable PPP in the BIOS or try disabling it in Device Manager and
see if it holds. If you simply unininstall it, I believe it will only reinstall if
it's integrated.

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375



"Herbert Chan" wrote in message
...
Hello,

My pc is win98se and I have a broadband internet connection.

I have been using the broadband for a few years. And since the beginning of
this year, my internet connection will be intermittently lost. At first, I
thought something was wrong with the modem, which is terayon TA-102. I have
called the ISP to replace it. However, the problem is still there. Then I
tried to get used to it. Whenever I lose the connection, I will need to
reboot my computer to get the connection back (the modem does not need to be
flipped off then on).

I called the technical support again today, and we've looked at the modem
and it didn't appear that my modem was failing to provide a signal for me.
Then I run winipcfg and see that there are 3 entries: PPP Adapter.,
Microsoft TV/Video Connection and Realtek 8139-series PCI NIC. PPP adapter
is for dialup connection and Realtek is the network card for broadband. The
technical support girl said win98se will sometimes switch from the network
card to PPP adapter, although she doesn't know under what circumstances this
will happen. And the problem I've got is because my computer has switched
on its own accord from the network card to PPP adapter.

So are there any ways to force the computer to only use the network card so
that it will always use the network card to get online? Or how can I
uninstall ppp adapter so that the computer can't even choose to switch back
to it?

Thanks.

Herbert



  #3  
Old October 21st 06, 06:10 AM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
glee
External Usenet User
 
Posts: 2,458
Default PPP Adapter. in winipcfg

If he's trying to get rid of the PPP Adapter, he would be looking at removing the
modem, not the NIC, wouldn't he? Or am I reading his post or your reply wrong
(wouldn't be the first time, eh?)?

Either way, the basis of your suggestion holds....whichever he needs to remove, it
depends on whether it is integrated or not, as an integrated NIC *or* dial-up modem
will reinstall if only removed from DM instead of being disabled in the BIOS setup,
or in DM, IIRC.
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/
http://dts-l.org/goodpost.htm


"Brian A" gonefish'n@afarawaylake wrote in message
...
I notice you mention the NIC being a network card, just to be sure, is it an
adapter card or is it integrated on the motherboard? If it's integrated you may
need to see if you can disable PPP in the BIOS or try disabling it in Device
Manager and see if it holds. If you simply unininstall it, I believe it will only
reinstall if it's integrated.

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375



"Herbert Chan" wrote in message
...
Hello,

My pc is win98se and I have a broadband internet connection.

I have been using the broadband for a few years. And since the beginning of
this year, my internet connection will be intermittently lost. At first, I
thought something was wrong with the modem, which is terayon TA-102. I have
called the ISP to replace it. However, the problem is still there. Then I
tried to get used to it. Whenever I lose the connection, I will need to
reboot my computer to get the connection back (the modem does not need to be
flipped off then on).

I called the technical support again today, and we've looked at the modem
and it didn't appear that my modem was failing to provide a signal for me.
Then I run winipcfg and see that there are 3 entries: PPP Adapter.,
Microsoft TV/Video Connection and Realtek 8139-series PCI NIC. PPP adapter
is for dialup connection and Realtek is the network card for broadband. The
technical support girl said win98se will sometimes switch from the network
card to PPP adapter, although she doesn't know under what circumstances this
will happen. And the problem I've got is because my computer has switched
on its own accord from the network card to PPP adapter.

So are there any ways to force the computer to only use the network card so
that it will always use the network card to get online? Or how can I
uninstall ppp adapter so that the computer can't even choose to switch back
to it?

Thanks.

Herbert




  #4  
Old October 21st 06, 06:52 AM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
Herbert Chan
External Usenet User
 
Posts: 97
Default PPP Adapter. in winipcfg

Thanks for you guys' quick responses.

My motherboard is Asus CUSL2. The Realtek card is a standalone network card
that's plugged into one of the PCI slots, and the faxmodem is a separate
card plugged into the PCI slot.

As I will want to receive fax using the faxmodem card, I will want to be
able to keep this capability.

So could you explain again what I should do, now that you know more about my
pc's configuration.

Thanks.

Herbert

"glee" ¦b¶l¥ó
¤¤¼¶¼g...
If he's trying to get rid of the PPP Adapter, he would be looking at

removing the
modem, not the NIC, wouldn't he? Or am I reading his post or your reply

wrong
(wouldn't be the first time, eh?)?

Either way, the basis of your suggestion holds....whichever he needs to

remove, it
depends on whether it is integrated or not, as an integrated NIC *or*

dial-up modem
will reinstall if only removed from DM instead of being disabled in the

BIOS setup,
or in DM, IIRC.
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/
http://dts-l.org/goodpost.htm


"Brian A" gonefish'n@afarawaylake wrote in message
...
I notice you mention the NIC being a network card, just to be sure, is

it an
adapter card or is it integrated on the motherboard? If it's integrated

you may
need to see if you can disable PPP in the BIOS or try disabling it in

Device
Manager and see if it holds. If you simply unininstall it, I believe it

will only
reinstall if it's integrated.

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375



"Herbert Chan" wrote in message
...
Hello,

My pc is win98se and I have a broadband internet connection.

I have been using the broadband for a few years. And since the

beginning of
this year, my internet connection will be intermittently lost. At

first, I
thought something was wrong with the modem, which is terayon TA-102. I

have
called the ISP to replace it. However, the problem is still there.

Then I
tried to get used to it. Whenever I lose the connection, I will need

to
reboot my computer to get the connection back (the modem does not need

to be
flipped off then on).

I called the technical support again today, and we've looked at the

modem
and it didn't appear that my modem was failing to provide a signal for

me.
Then I run winipcfg and see that there are 3 entries: PPP Adapter.,
Microsoft TV/Video Connection and Realtek 8139-series PCI NIC. PPP

adapter
is for dialup connection and Realtek is the network card for broadband.

The
technical support girl said win98se will sometimes switch from the

network
card to PPP adapter, although she doesn't know under what circumstances

this
will happen. And the problem I've got is because my computer has

switched
on its own accord from the network card to PPP adapter.

So are there any ways to force the computer to only use the network

card so
that it will always use the network card to get online? Or how can I
uninstall ppp adapter so that the computer can't even choose to switch

back
to it?

Thanks.

Herbert






  #5  
Old October 21st 06, 05:15 PM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
AlmostBob
External Usenet User
 
Posts: 187
Default PPP Adapter. in winipcfg

perhaps change all the settings in Internet Options Connections tab, to
'never dial a connection' so they always use the nic
and OE and any other installed program

--
-
Adaware http://www.lavasoft.de
spybot http://www.safer-networking.org
AVG free antivirus http://www.grisoft.com
Etrust/Vet/CA.online Antivirus scan
http://www3.ca.com/securityadvisor/virusinfo/scan.aspx
Super Antispyware http://www.superantispyware.com/
Panda online AntiVirus scan http://www.activescan.com
Panda online AntiSpyware Scan
http://www.pandasoftware.com/virus_info/spyware/test/
Catalog of removal tools (1)
http://www.pandasoftware.com/download/utilities/
Catalog of removal tools (2)
http://www3.ca.com/securityadvisor/n...aspx?CID=40387
Trouble Shooting guide to Windows http://mvps.org/winhelp2002/
Blocking Unwanted Parasites with a Hosts file
http://mvps.org/winhelp2002/hosts.htm
Cool Web Shredder http://www.trendmicro.com/cwshredder/
links provided as a courtesy, read all instructions on the pages before
use
Grateful thanks to the authors/webmasters
_
"Herbert Chan" wrote in message
...
Thanks for you guys' quick responses.

My motherboard is Asus CUSL2. The Realtek card is a standalone network

card
that's plugged into one of the PCI slots, and the faxmodem is a separate
card plugged into the PCI slot.

As I will want to receive fax using the faxmodem card, I will want to be
able to keep this capability.

So could you explain again what I should do, now that you know more about

my
pc's configuration.

Thanks.

Herbert

"glee" ¦b¶l¥ó
¤¤¼¶¼g...
If he's trying to get rid of the PPP Adapter, he would be looking at

removing the
modem, not the NIC, wouldn't he? Or am I reading his post or your reply

wrong
(wouldn't be the first time, eh?)?

Either way, the basis of your suggestion holds....whichever he needs to

remove, it
depends on whether it is integrated or not, as an integrated NIC *or*

dial-up modem
will reinstall if only removed from DM instead of being disabled in the

BIOS setup,
or in DM, IIRC.
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/
http://dts-l.org/goodpost.htm


"Brian A" gonefish'n@afarawaylake wrote in message
...
I notice you mention the NIC being a network card, just to be sure,

is
it an
adapter card or is it integrated on the motherboard? If it's

integrated
you may
need to see if you can disable PPP in the BIOS or try disabling it in

Device
Manager and see if it holds. If you simply unininstall it, I believe

it
will only
reinstall if it's integrated.

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375



"Herbert Chan" wrote in message
...
Hello,

My pc is win98se and I have a broadband internet connection.

I have been using the broadband for a few years. And since the

beginning of
this year, my internet connection will be intermittently lost. At

first, I
thought something was wrong with the modem, which is terayon TA-102.

I
have
called the ISP to replace it. However, the problem is still there.

Then I
tried to get used to it. Whenever I lose the connection, I will need

to
reboot my computer to get the connection back (the modem does not

need
to be
flipped off then on).

I called the technical support again today, and we've looked at the

modem
and it didn't appear that my modem was failing to provide a signal

for
me.
Then I run winipcfg and see that there are 3 entries: PPP Adapter.,
Microsoft TV/Video Connection and Realtek 8139-series PCI NIC. PPP

adapter
is for dialup connection and Realtek is the network card for

broadband.
The
technical support girl said win98se will sometimes switch from the

network
card to PPP adapter, although she doesn't know under what

circumstances
this
will happen. And the problem I've got is because my computer has

switched
on its own accord from the network card to PPP adapter.

So are there any ways to force the computer to only use the network

card so
that it will always use the network card to get online? Or how can I
uninstall ppp adapter so that the computer can't even choose to

switch
back
to it?

Thanks.

Herbert








  #6  
Old October 21st 06, 09:37 PM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
Gary S. Terhune
External Usenet User
 
Posts: 1,846
Default PPP Adapter. in winipcfg

I vote for Ingeborg's solution. Remove Dial-up Networking in the Network
applet of Control Panel. Will remove PPP and leave modem for FAX-only. I'd
have posted the same yesterday, but I don't have a modem in this machine so
I can't test.

--
Gary S. Terhune
MS MVP Shell/User
http://grystmill.com/articles/cleanboot.htm
http://grystmill.com/articles/security.htm

"AlmostBob" wrote in message
...
perhaps change all the settings in Internet Options Connections tab, to
'never dial a connection' so they always use the nic
and OE and any other installed program

--
-
Adaware http://www.lavasoft.de
spybot http://www.safer-networking.org
AVG free antivirus http://www.grisoft.com
Etrust/Vet/CA.online Antivirus scan
http://www3.ca.com/securityadvisor/virusinfo/scan.aspx
Super Antispyware http://www.superantispyware.com/
Panda online AntiVirus scan http://www.activescan.com
Panda online AntiSpyware Scan
http://www.pandasoftware.com/virus_info/spyware/test/
Catalog of removal tools (1)
http://www.pandasoftware.com/download/utilities/
Catalog of removal tools (2)
http://www3.ca.com/securityadvisor/n...aspx?CID=40387
Trouble Shooting guide to Windows http://mvps.org/winhelp2002/
Blocking Unwanted Parasites with a Hosts file
http://mvps.org/winhelp2002/hosts.htm
Cool Web Shredder http://www.trendmicro.com/cwshredder/
links provided as a courtesy, read all instructions on the pages before
use
Grateful thanks to the authors/webmasters
_
"Herbert Chan" wrote in message
...
Thanks for you guys' quick responses.

My motherboard is Asus CUSL2. The Realtek card is a standalone network

card
that's plugged into one of the PCI slots, and the faxmodem is a separate
card plugged into the PCI slot.

As I will want to receive fax using the faxmodem card, I will want to be
able to keep this capability.

So could you explain again what I should do, now that you know more

about
my
pc's configuration.

Thanks.

Herbert

"glee" ¦b¶l¥ó
¤¤¼¶¼g...
If he's trying to get rid of the PPP Adapter, he would be looking at

removing the
modem, not the NIC, wouldn't he? Or am I reading his post or your

reply
wrong
(wouldn't be the first time, eh?)?

Either way, the basis of your suggestion holds....whichever he needs

to
remove, it
depends on whether it is integrated or not, as an integrated NIC *or*

dial-up modem
will reinstall if only removed from DM instead of being disabled in

the
BIOS setup,
or in DM, IIRC.
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/
http://dts-l.org/goodpost.htm


"Brian A" gonefish'n@afarawaylake wrote in message
...
I notice you mention the NIC being a network card, just to be sure,

is
it an
adapter card or is it integrated on the motherboard? If it's

integrated
you may
need to see if you can disable PPP in the BIOS or try disabling it

in
Device
Manager and see if it holds. If you simply unininstall it, I

believe
it
will only
reinstall if it's integrated.

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375



"Herbert Chan" wrote in message
...
Hello,

My pc is win98se and I have a broadband internet connection.

I have been using the broadband for a few years. And since the

beginning of
this year, my internet connection will be intermittently lost. At

first, I
thought something was wrong with the modem, which is terayon

TA-102.
I
have
called the ISP to replace it. However, the problem is still there.

Then I
tried to get used to it. Whenever I lose the connection, I will

need
to
reboot my computer to get the connection back (the modem does not

need
to be
flipped off then on).

I called the technical support again today, and we've looked at the

modem
and it didn't appear that my modem was failing to provide a signal

for
me.
Then I run winipcfg and see that there are 3 entries: PPP Adapter.,
Microsoft TV/Video Connection and Realtek 8139-series PCI NIC. PPP

adapter
is for dialup connection and Realtek is the network card for

broadband.
The
technical support girl said win98se will sometimes switch from the

network
card to PPP adapter, although she doesn't know under what

circumstances
this
will happen. And the problem I've got is because my computer has

switched
on its own accord from the network card to PPP adapter.

So are there any ways to force the computer to only use the network

card so
that it will always use the network card to get online? Or how can

I
uninstall ppp adapter so that the computer can't even choose to

switch
back
to it?

Thanks.

Herbert










  #7  
Old October 23rd 06, 05:12 AM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
Brian A
External Usenet User
 
Posts: 177
Default PPP Adapter. in winipcfg

"glee" wrote in message
...
If he's trying to get rid of the PPP Adapter, he would be looking at removing the
modem, not the NIC, wouldn't he? Or am I reading his post or your reply wrong
(wouldn't be the first time, eh?)?


No, you read it correctly, I mixed things up and together without notice. I was
more on track of disable/uninstall. I always prefer disable as a start testing point
and then uninstall/reinstall. If no help, time to start digging. I don't think PPP
or others of such can be disabled in the BIOS, can they? I've never seen an
integrated modem on a board


Either way, the basis of your suggestion holds....whichever he needs to remove, it
depends on whether it is integrated or not, as an integrated NIC *or* dial-up modem
will reinstall if only removed from DM instead of being disabled in the BIOS setup,
or in DM, IIRC.
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/
http://dts-l.org/goodpost.htm



--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375





"Brian A" gonefish'n@afarawaylake wrote in message
...
I notice you mention the NIC being a network card, just to be sure, is it an
adapter card or is it integrated on the motherboard? If it's integrated you may
need to see if you can disable PPP in the BIOS or try disabling it in Device
Manager and see if it holds. If you simply unininstall it, I believe it will only
reinstall if it's integrated.

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375



"Herbert Chan" wrote in message
...
Hello,

My pc is win98se and I have a broadband internet connection.

I have been using the broadband for a few years. And since the beginning of
this year, my internet connection will be intermittently lost. At first, I
thought something was wrong with the modem, which is terayon TA-102. I have
called the ISP to replace it. However, the problem is still there. Then I
tried to get used to it. Whenever I lose the connection, I will need to
reboot my computer to get the connection back (the modem does not need to be
flipped off then on).

I called the technical support again today, and we've looked at the modem
and it didn't appear that my modem was failing to provide a signal for me.
Then I run winipcfg and see that there are 3 entries: PPP Adapter.,
Microsoft TV/Video Connection and Realtek 8139-series PCI NIC. PPP adapter
is for dialup connection and Realtek is the network card for broadband. The
technical support girl said win98se will sometimes switch from the network
card to PPP adapter, although she doesn't know under what circumstances this
will happen. And the problem I've got is because my computer has switched
on its own accord from the network card to PPP adapter.

So are there any ways to force the computer to only use the network card so
that it will always use the network card to get online? Or how can I
uninstall ppp adapter so that the computer can't even choose to switch back
to it?

Thanks.

Herbert





  #8  
Old October 23rd 06, 05:28 AM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
glee
External Usenet User
 
Posts: 2,458
Default PPP Adapter. in winipcfg

"Brian A" gonefish'n@afarawaylake wrote in message
...
"glee" wrote in message
...
If he's trying to get rid of the PPP Adapter, he would be looking at removing the
modem, not the NIC, wouldn't he? Or am I reading his post or your reply wrong
(wouldn't be the first time, eh?)?


No, you read it correctly, I mixed things up and together without notice. I was
more on track of disable/uninstall. I always prefer disable as a start testing
point and then uninstall/reinstall. If no help, time to start digging. I don't
think PPP or others of such can be disabled in the BIOS, can they? I've never
seen an integrated modem on a board
snip


I've seen lots on laptops, but we now know that's not what the OP has (IIRC). :-)

No, I didn't mean to suggest PPP would be disabled in BIOS, only that an integrated
modem or NIC could be.
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/
http://dts-l.org/goodpost.htm

  #9  
Old October 21st 06, 11:04 AM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
James Egan
External Usenet User
 
Posts: 339
Default PPP Adapter. in winipcfg


On Sat, 21 Oct 2006 12:14:53 +0800, "Herbert Chan"
wrote:

The
technical support girl said win98se will sometimes switch from the network
card to PPP adapter, although she doesn't know under what circumstances this
will happen. And the problem I've got is because my computer has switched
on its own accord from the network card to PPP adapter.


The computer won't do that on its own.

What it will do, if you instigate a dial up connection, is change the
default gateway from the network card to the dialup and effectively
turn your broadband internet connection off, though as soon as you
hang up this dialup connection the broadband internet connection will
be restored.

If you want to change this behaviour, there is a box to uncheck on the
dialup tcp/ip advanced properties which says "use default gateway on
remote network"

If you don't have any dialers installed then have a look at the fax
software to see if there are any settings there which look suspect.

If you still can't resolve the issue, wait until the connection fails
then go to a command prompt and type

route print c:\temp.txt

Compare the contents of c:\temp.txt with similar output when the
broadband connection is working and if they are different then post
the output (of the temp.txt's) here.


Jim.

  #10  
Old October 21st 06, 11:07 AM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.internet,microsoft.public.win98.networking,microsoft.public.win98.setup
Ingeborg
External Usenet User
 
Posts: 217
Default PPP Adapter. in winipcfg

Herbert Chan wrote:

Hello,

My pc is win98se and I have a broadband internet connection.

I have been using the broadband for a few years. And since the
beginning of this year, my internet connection will be intermittently
lost. At first, I thought something was wrong with the modem, which
is terayon TA-102. I have called the ISP to replace it. However, the
problem is still there. Then I tried to get used to it. Whenever I
lose the connection, I will need to reboot my computer to get the
connection back (the modem does not need to be flipped off then on).

I called the technical support again today, and we've looked at the
modem and it didn't appear that my modem was failing to provide a
signal for me. Then I run winipcfg and see that there are 3 entries:
PPP Adapter., Microsoft TV/Video Connection and Realtek 8139-series
PCI NIC. PPP adapter is for dialup connection and Realtek is the
network card for broadband. The technical support girl said win98se
will sometimes switch from the network card to PPP adapter, although
she doesn't know under what circumstances this will happen. And the
problem I've got is because my computer has switched on its own accord
from the network card to PPP adapter.

So are there any ways to force the computer to only use the network
card so that it will always use the network card to get online? Or
how can I uninstall ppp adapter so that the computer can't even choose
to switch back to it?


Goto Control panel-Software-Windows setup, and remove 'Dialup
networking'. The PPP adapter will disappear. Your modem will still be
available for faxing.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PPP Adapter. in winipcfg Herbert Chan General 45 October 24th 06 09:17 PM
98 freezes while idle only mouse works SteveO General 4 January 25th 06 04:49 PM
Window freezes [email protected] General 12 October 31st 05 03:38 PM
Install Knox Perifs [email protected] General 3 September 12th 05 09:02 PM
Please help! Display settings !! Mitzi Monitors & Displays 12 July 11th 04 05:19 AM


All times are GMT +1. The time now is 07:31 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.