If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
BootUp
We have a PC w/Windows ME someone gave to us. More and
more frequently now, when we boot up it always gets stuck after the Windows ME logo comes up at a blank screen with the cursor up in the upper lefthand corner and we have to power down and back up again (sometimes 2 or 3 times). When we do get on (using the #1 choice of 'Normal' logon when prompted) the display settings are larger than we keep them normally. Also, sometimes after that, the desktop screen will blink repeatedly until we move the mouse and sometimes freeze. We have downloaded and used 'Stinger''Spyware''Adaware' to get rid of hijack, trojan and spyware files but nothing helps...appreciate some input. Thx, M |
#2
|
|||
|
|||
If you have the ME CD and can get to a desktop of some kind insert the ME CD
and reinstall ME on top of itself to try to fix the problems you're having. "M" wrote in message ... We have a PC w/Windows ME someone gave to us. More and more frequently now, when we boot up it always gets stuck after the Windows ME logo comes up at a blank screen with the cursor up in the upper lefthand corner and we have to power down and back up again (sometimes 2 or 3 times). When we do get on (using the #1 choice of 'Normal' logon when prompted) the display settings are larger than we keep them normally. Also, sometimes after that, the desktop screen will blink repeatedly until we move the mouse and sometimes freeze. We have downloaded and used 'Stinger''Spyware''Adaware' to get rid of hijack, trojan and spyware files but nothing helps...appreciate some input. Thx, M |
#3
|
|||
|
|||
You should try
A registry repair: Bootup with a startup floppy disk and at the A:\ prompt type C: (press enter) Now type: cd windows\command (press enter) Your prompt should read C:\Windows\Command, correct? Now type: scanreg /fix (space between g and /) Press enter, wait for the process to finish and reboot WITHOUT the disk. If that doesn't work, try a registry resto Bootup with a startup floppy disk and at the A:\ prompt and repeat the steps above and replace the scanreg command with: scanreg /restore (space between g and /) Press enter, select a date PRIOR to the problem, press enter, wait for the process to finish and reboot WITHOUT the disk. If you don't have a startup disk, download one from www.bootdisk.com. Any luck? Zee "M" wrote in message ... We have a PC w/Windows ME someone gave to us. More and more frequently now, when we boot up it always gets stuck after the Windows ME logo comes up at a blank screen with the cursor up in the upper lefthand corner and we have to power down and back up again (sometimes 2 or 3 times). When we do get on (using the #1 choice of 'Normal' logon when prompted) the display settings are larger than we keep them normally. Also, sometimes after that, the desktop screen will blink repeatedly until we move the mouse and sometimes freeze. We have downloaded and used 'Stinger''Spyware''Adaware' to get rid of hijack, trojan and spyware files but nothing helps...appreciate some input. Thx, M |
#4
|
|||
|
|||
Zee, no need to change to the command directory as it's in the path. Scanreg
/restore at the A:\ prompt will do. Shane "oops!!" wrote in message ... You should try A registry repair: Bootup with a startup floppy disk and at the A:\ prompt type C: (press enter) Now type: cd windows\command (press enter) Your prompt should read C:\Windows\Command, correct? Now type: scanreg /fix (space between g and /) Press enter, wait for the process to finish and reboot WITHOUT the disk. If that doesn't work, try a registry resto Bootup with a startup floppy disk and at the A:\ prompt and repeat the steps above and replace the scanreg command with: scanreg /restore (space between g and /) Press enter, select a date PRIOR to the problem, press enter, wait for the process to finish and reboot WITHOUT the disk. If you don't have a startup disk, download one from www.bootdisk.com. Any luck? Zee "M" wrote in message ... We have a PC w/Windows ME someone gave to us. More and more frequently now, when we boot up it always gets stuck after the Windows ME logo comes up at a blank screen with the cursor up in the upper lefthand corner and we have to power down and back up again (sometimes 2 or 3 times). When we do get on (using the #1 choice of 'Normal' logon when prompted) the display settings are larger than we keep them normally. Also, sometimes after that, the desktop screen will blink repeatedly until we move the mouse and sometimes freeze. We have downloaded and used 'Stinger''Spyware''Adaware' to get rid of hijack, trojan and spyware files but nothing helps...appreciate some input. Thx, M |
#5
|
|||
|
|||
You may ne surprised.... Guessing you need a bit more experience. Zee "Shane" wrote in message ... Zee, no need to change to the command directory as it's in the path. Scanreg /restore at the A:\ prompt will do. Shane "oops!!" wrote in message ... You should try A registry repair: Bootup with a startup floppy disk and at the A:\ prompt type C: (press enter) Now type: cd windows\command (press enter) Your prompt should read C:\Windows\Command, correct? Now type: scanreg /fix (space between g and /) Press enter, wait for the process to finish and reboot WITHOUT the disk. If that doesn't work, try a registry resto Bootup with a startup floppy disk and at the A:\ prompt and repeat the steps above and replace the scanreg command with: scanreg /restore (space between g and /) Press enter, select a date PRIOR to the problem, press enter, wait for the process to finish and reboot WITHOUT the disk. If you don't have a startup disk, download one from www.bootdisk.com. Any luck? Zee "M" wrote in message ... We have a PC w/Windows ME someone gave to us. More and more frequently now, when we boot up it always gets stuck after the Windows ME logo comes up at a blank screen with the cursor up in the upper lefthand corner and we have to power down and back up again (sometimes 2 or 3 times). When we do get on (using the #1 choice of 'Normal' logon when prompted) the display settings are larger than we keep them normally. Also, sometimes after that, the desktop screen will blink repeatedly until we move the mouse and sometimes freeze. We have downloaded and used 'Stinger''Spyware''Adaware' to get rid of hijack, trojan and spyware files but nothing helps...appreciate some input. Thx, M |
#6
|
|||
|
|||
You mean the autoexec.bat from www.bootdisk.com doesn't have
path=c:\windows;c:\windows\command? Have to admit I haven't used them - I make my own. btw perhaps you should recommend the oem bootdisk? Shane "oops!!" wrote in message ... You may ne surprised.... Guessing you need a bit more experience. Zee "Shane" wrote in message ... Zee, no need to change to the command directory as it's in the path. Scanreg /restore at the A:\ prompt will do. Shane "oops!!" wrote in message ... You should try A registry repair: Bootup with a startup floppy disk and at the A:\ prompt type C: (press enter) Now type: cd windows\command (press enter) Your prompt should read C:\Windows\Command, correct? Now type: scanreg /fix (space between g and /) Press enter, wait for the process to finish and reboot WITHOUT the disk. If that doesn't work, try a registry resto Bootup with a startup floppy disk and at the A:\ prompt and repeat the steps above and replace the scanreg command with: scanreg /restore (space between g and /) Press enter, select a date PRIOR to the problem, press enter, wait for the process to finish and reboot WITHOUT the disk. If you don't have a startup disk, download one from www.bootdisk.com. Any luck? Zee "M" wrote in message ... We have a PC w/Windows ME someone gave to us. More and more frequently now, when we boot up it always gets stuck after the Windows ME logo comes up at a blank screen with the cursor up in the upper lefthand corner and we have to power down and back up again (sometimes 2 or 3 times). When we do get on (using the #1 choice of 'Normal' logon when prompted) the display settings are larger than we keep them normally. Also, sometimes after that, the desktop screen will blink repeatedly until we move the mouse and sometimes freeze. We have downloaded and used 'Stinger''Spyware''Adaware' to get rid of hijack, trojan and spyware files but nothing helps...appreciate some input. Thx, M |
#7
|
|||
|
|||
scanreg /fix works fine from the bootdisk.com boot floppy - as it does from
the ME floppy. You need to use the With/out CD option though, rather than the Minimal one -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "Shane" wrote in message ... You mean the autoexec.bat from www.bootdisk.com doesn't have path=c:\windows;c:\windows\command? Have to admit I haven't used them - I make my own. btw perhaps you should recommend the oem bootdisk? Shane "oops!!" wrote in message ... You may ne surprised.... Guessing you need a bit more experience. Zee "Shane" wrote in message ... Zee, no need to change to the command directory as it's in the path. Scanreg /restore at the A:\ prompt will do. Shane "oops!!" wrote in message ... You should try A registry repair: Bootup with a startup floppy disk and at the A:\ prompt type C: (press enter) Now type: cd windows\command (press enter) Your prompt should read C:\Windows\Command, correct? Now type: scanreg /fix (space between g and /) Press enter, wait for the process to finish and reboot WITHOUT the disk. If that doesn't work, try a registry resto Bootup with a startup floppy disk and at the A:\ prompt and repeat the steps above and replace the scanreg command with: scanreg /restore (space between g and /) Press enter, select a date PRIOR to the problem, press enter, wait for the process to finish and reboot WITHOUT the disk. If you don't have a startup disk, download one from www.bootdisk.com. Any luck? Zee "M" wrote in message ... We have a PC w/Windows ME someone gave to us. More and more frequently now, when we boot up it always gets stuck after the Windows ME logo comes up at a blank screen with the cursor up in the upper lefthand corner and we have to power down and back up again (sometimes 2 or 3 times). When we do get on (using the #1 choice of 'Normal' logon when prompted) the display settings are larger than we keep them normally. Also, sometimes after that, the desktop screen will blink repeatedly until we move the mouse and sometimes freeze. We have downloaded and used 'Stinger''Spyware''Adaware' to get rid of hijack, trojan and spyware files but nothing helps...appreciate some input. Thx, M |
#8
|
|||
|
|||
OK. Cheers, Noel. btw, Rosie bought a mouse in earlier and when I rescued
it, it ran up my trouser leg. Luckily I stopped it getting above the knee! What a surprise though! Shane "Noel Paton" wrote in message ... scanreg /fix works fine from the bootdisk.com boot floppy - as it does from the ME floppy. You need to use the With/out CD option though, rather than the Minimal one -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "Shane" wrote in message ... You mean the autoexec.bat from www.bootdisk.com doesn't have path=c:\windows;c:\windows\command? Have to admit I haven't used them - I make my own. btw perhaps you should recommend the oem bootdisk? Shane "oops!!" wrote in message ... You may ne surprised.... Guessing you need a bit more experience. Zee "Shane" wrote in message ... Zee, no need to change to the command directory as it's in the path. Scanreg /restore at the A:\ prompt will do. Shane "oops!!" wrote in message ... You should try A registry repair: Bootup with a startup floppy disk and at the A:\ prompt type C: (press enter) Now type: cd windows\command (press enter) Your prompt should read C:\Windows\Command, correct? Now type: scanreg /fix (space between g and /) Press enter, wait for the process to finish and reboot WITHOUT the disk. If that doesn't work, try a registry resto Bootup with a startup floppy disk and at the A:\ prompt and repeat the steps above and replace the scanreg command with: scanreg /restore (space between g and /) Press enter, select a date PRIOR to the problem, press enter, wait for the process to finish and reboot WITHOUT the disk. If you don't have a startup disk, download one from www.bootdisk.com. Any luck? Zee "M" wrote in message ... We have a PC w/Windows ME someone gave to us. More and more frequently now, when we boot up it always gets stuck after the Windows ME logo comes up at a blank screen with the cursor up in the upper lefthand corner and we have to power down and back up again (sometimes 2 or 3 times). When we do get on (using the #1 choice of 'Normal' logon when prompted) the display settings are larger than we keep them normally. Also, sometimes after that, the desktop screen will blink repeatedly until we move the mouse and sometimes freeze. We have downloaded and used 'Stinger''Spyware''Adaware' to get rid of hijack, trojan and spyware files but nothing helps...appreciate some input. Thx, M |
#9
|
|||
|
|||
ROFL or else it would have died of shock.
Joan Shane wrote: OK. Cheers, Noel. btw, Rosie bought a mouse in earlier and when I rescued it, it ran up my trouser leg. Luckily I stopped it getting above the knee! What a surprise though! Shane |
#10
|
|||
|
|||
It would have been Good King Harry all over again!
Shane "Joan Archer" wrote in message ... ROFL or else it would have died of shock. Joan Shane wrote: OK. Cheers, Noel. btw, Rosie bought a mouse in earlier and when I rescued it, it ran up my trouser leg. Luckily I stopped it getting above the knee! What a surprise though! Shane |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Removing Password Prompt at Bootup | Brad | General | 4 | August 23rd 04 01:55 AM |
System will not bootup in windows98. | B. Kibort | Setup & Installation | 2 | July 28th 04 06:51 AM |
can't get client for microsoft networks on bootup | Ev | Networking | 1 | July 7th 04 12:32 AM |
win98 registry bootup problem | Mark | General | 1 | July 5th 04 08:57 PM |
Screen blinks off at bootup | Arsenio Oloroso | Improving Performance | 2 | May 10th 04 06:46 PM |