ERROR:OE:0028:C02C29AD

lol Chicken g
Joan


Mart wrote:

I'm sure that Noel will have further comments regarding NAV and I'll
leave those to him g

Mart

I have been using the router for nearly a year now with no problems.

"Mart" wrote:

You mentioned that you are trying to link thru' a wireless router. As Noel
has alluded, PRISMA02 seems to be related to D-Link products - a Wireless
D-Link DWL-120 USB Adapter, perhaps?

Have you ever managed to get the wireless adapter to work (or even install)
on this machine before or has this report only occurred since trying to
install your adapter? Noel's suggestion of 'completely' removing the device
and starting over again is likely to be the only way forward. BUT...

I'm sure that Noel will have further comments regarding NAV and I'll leave
those to him g

Mart




"scorpio" wrote in message
...
Not quite sure if i have deleted all d link units, but have removed some
but
still no joy, i presume these are external links ie printer etc. my other
pc
is XP and i am trying to link through a wanadoo wireless router. Fire wall
is
Norton anti virus

"Noel Paton" wrote:

This error appears to be related to the drivers for a D-Link unit
I would boot to Safe Mode, and remove ALL entries for D-Link hardware in
Device Manager, and reboot to Normal Mode
This should force a reinstall of the drivers.

If this doesn't fix it, it's quite possible that your firewall is causing
the problem (let me guess - Zone Alarm?) - in which case (assuming you're
behind a router) you should uninstall the firewall completely before
proceeding to attempt further work on the system.

How are you networking? what is the IP you are getting from the DHCP
server?
(is the server the other machine, or a router - what is the OS of the
other
machine?)

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"scorpio" wrote in message
...
I have tried to network my lap top with my desk top (the desk top was
what
i
was working on at the time) i went through the net work wizard, turned
off
my
fire wall, and when i tried to re-start the system i got a blue page
with
error message: anerror has occured press ctrl alt delete to re start or
enter
to return to windows (which none work as it seems page has frozen) File
name
PRISMA02 (01) + 00019208 error OE:0028:C2A43CC8

"Noel Paton" wrote:

What is the EXACT wording of your error message?
What changes have you made to the system lately?
When does the error message appear?

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to
NG's
"scorpio" wrote in message
...
I am getting similar error message,0e:0028:c2a43cc8, i have tried the
options
by Mart but no joy. Any help please. Also have tried to write a new
question
in forum but unable so thought this was the most apt place.

"BK" wrote:

I get a blue screen error on startup. I can only do a safe mode
start.
File Name:IOS(05)+00001ED1 ERROR:OE:0028:CO02C29AD
I did a scanreg/restore with no luck.
I did a search on microsoft but did not find any information on
this error.

Thanks
BK

sorry, what do you mean

"Joan Archer" wrote:

lol Chicken g
Joan


Mart wrote:

I'm sure that Noel will have further comments regarding NAV and I'll
leave those to him g

Mart

Sorted thanks chaps, i removed usb adapter and all sees fine. Do you think i
could risk re-installing the device to set upmy broadband connection again,
thanks again for your help,

"Mart" wrote:

You mentioned that you are trying to link thru' a wireless router. As Noel
has alluded, PRISMA02 seems to be related to D-Link products - a Wireless
D-Link DWL-120 USB Adapter, perhaps?

Have you ever managed to get the wireless adapter to work (or even install)
on this machine before or has this report only occurred since trying to
install your adapter? Noel's suggestion of 'completely' removing the device
and starting over again is likely to be the only way forward. BUT...

I'm sure that Noel will have further comments regarding NAV and I'll leave
those to him g

Mart




"scorpio" wrote in message
...
Not quite sure if i have deleted all d link units, but have removed some
but
still no joy, i presume these are external links ie printer etc. my other
pc
is XP and i am trying to link through a wanadoo wireless router. Fire wall
is
Norton anti virus

"Noel Paton" wrote:

This error appears to be related to the drivers for a D-Link unit
I would boot to Safe Mode, and remove ALL entries for D-Link hardware in
Device Manager, and reboot to Normal Mode
This should force a reinstall of the drivers.

If this doesn't fix it, it's quite possible that your firewall is causing
the problem (let me guess - Zone Alarm?) - in which case (assuming you're
behind a router) you should uninstall the firewall completely before
proceeding to attempt further work on the system.

How are you networking? what is the IP you are getting from the DHCP
server?
(is the server the other machine, or a router - what is the OS of the
other
machine?)

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"scorpio" wrote in message
...
I have tried to network my lap top with my desk top (the desk top was
what
i
was working on at the time) i went through the net work wizard, turned
off
my
fire wall, and when i tried to re-start the system i got a blue page
with
error message: anerror has occured press ctrl alt delete to re start or
enter
to return to windows (which none work as it seems page has frozen) File
name
PRISMA02 (01) + 00019208 error OE:0028:C2A43CC8

"Noel Paton" wrote:

What is the EXACT wording of your error message?
What changes have you made to the system lately?
When does the error message appear?

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to
NG's
"scorpio" wrote in message
...
I am getting similar error message,0e:0028:c2a43cc8, i have tried the
options
by Mart but no joy. Any help please. Also have tried to write a new
question
in forum but unable so thought this was the most apt place.

"BK" wrote:

I get a blue screen error on startup. I can only do a safe mode
start.
File Name:IOS(05)+00001ED1 ERROR:OE:0028:CO02C29AD
I did a scanreg/restore with no luck.
I did a search on microsoft but did not find any information on
this error.

Thanks
BK

lol Don't worry about it scorpio it was a reply to Mart and he knows
what I mean. g
Joan


scorpio wrote:
sorry, what do you mean

"Joan Archer" wrote:

lol Chicken g
Joan


Mart wrote:

I'm sure that Noel will have further comments regarding NAV and
I'll leave those to him g

Mart

Yes, Joan. I do know exactly what you mean. Me? I wouldn't touch NAV or any
other of their products with a bargepole (as I've said on several occasions)
but Noel has such an eloquent way of chastising people who do - especially
with WinMe.

Mart



"Joan Archer" wrote in message
...
lol Don't worry about it scorpio it was a reply to Mart and he knows
what I mean. g
Joan


scorpio wrote:
sorry, what do you mean

"Joan Archer" wrote:

lol Chicken g
Joan


Mart wrote:

I'm sure that Noel will have further comments regarding NAV and
I'll leave those to him g

Mart

Probably yes - but don't forget to set some SR points before you start, you
can always get back if it belly-up again. Also, you may wish to wait until
Noel returns before you proceed. He may well offer some very useful advice -
to your advantage.

Mart


"scorpio" wrote in message
...
Sorted thanks chaps, i removed usb adapter and all sees fine. Do you think
i
could risk re-installing the device to set upmy broadband connection
again,
thanks again for your help,

"Mart" wrote:

You mentioned that you are trying to link thru' a wireless router. As
Noel
has alluded, PRISMA02 seems to be related to D-Link products - a Wireless
D-Link DWL-120 USB Adapter, perhaps?

Have you ever managed to get the wireless adapter to work (or even
install)
on this machine before or has this report only occurred since trying to
install your adapter? Noel's suggestion of 'completely' removing the
device
and starting over again is likely to be the only way forward. BUT...

I'm sure that Noel will have further comments regarding NAV and I'll
leave
those to him g

Mart




"scorpio" wrote in message
...
Not quite sure if i have deleted all d link units, but have removed
some
but
still no joy, i presume these are external links ie printer etc. my
other
pc
is XP and i am trying to link through a wanadoo wireless router. Fire
wall
is
Norton anti virus

"Noel Paton" wrote:

This error appears to be related to the drivers for a D-Link unit
I would boot to Safe Mode, and remove ALL entries for D-Link hardware
in
Device Manager, and reboot to Normal Mode
This should force a reinstall of the drivers.

If this doesn't fix it, it's quite possible that your firewall is
causing
the problem (let me guess - Zone Alarm?) - in which case (assuming
you're
behind a router) you should uninstall the firewall completely before
proceeding to attempt further work on the system.

How are you networking? what is the IP you are getting from the DHCP
server?
(is the server the other machine, or a router - what is the OS of the
other
machine?)

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to
NG's
"scorpio" wrote in message
...
I have tried to network my lap top with my desk top (the desk top was
what
i
was working on at the time) i went through the net work wizard,
turned
off
my
fire wall, and when i tried to re-start the system i got a blue page
with
error message: anerror has occured press ctrl alt delete to re start
or
enter
to return to windows (which none work as it seems page has frozen)
File
name
PRISMA02 (01) + 00019208 error OE:0028:C2A43CC8

"Noel Paton" wrote:

What is the EXACT wording of your error message?
What changes have you made to the system lately?
When does the error message appear?

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages
to
NG's
"scorpio" wrote in message
...
I am getting similar error message,0e:0028:c2a43cc8, i have tried
the
options
by Mart but no joy. Any help please. Also have tried to write a
new
question
in forum but unable so thought this was the most apt place.

"BK" wrote:

I get a blue screen error on startup. I can only do a safe mode
start.
File Name:IOS(05)+00001ED1 ERROR:OE:0028:CO02C29AD
I did a scanreg/restore with no luck.
I did a search on microsoft but did not find any information on
this error.

Thanks
BK

I tried again but same outcome so have left alone until i can find out why it
is happenning

"Mart" wrote:

Probably yes - but don't forget to set some SR points before you start, you
can always get back if it belly-up again. Also, you may wish to wait until
Noel returns before you proceed. He may well offer some very useful advice -
to your advantage.

Mart


"scorpio" wrote in message
...
Sorted thanks chaps, i removed usb adapter and all sees fine. Do you think
i
could risk re-installing the device to set upmy broadband connection
again,
thanks again for your help,

"Mart" wrote:

You mentioned that you are trying to link thru' a wireless router. As
Noel
has alluded, PRISMA02 seems to be related to D-Link products - a Wireless
D-Link DWL-120 USB Adapter, perhaps?

Have you ever managed to get the wireless adapter to work (or even
install)
on this machine before or has this report only occurred since trying to
install your adapter? Noel's suggestion of 'completely' removing the
device
and starting over again is likely to be the only way forward. BUT...

I'm sure that Noel will have further comments regarding NAV and I'll
leave
those to him g

Mart




"scorpio" wrote in message
...
Not quite sure if i have deleted all d link units, but have removed
some
but
still no joy, i presume these are external links ie printer etc. my
other
pc
is XP and i am trying to link through a wanadoo wireless router. Fire
wall
is
Norton anti virus

"Noel Paton" wrote:

This error appears to be related to the drivers for a D-Link unit
I would boot to Safe Mode, and remove ALL entries for D-Link hardware
in
Device Manager, and reboot to Normal Mode
This should force a reinstall of the drivers.

If this doesn't fix it, it's quite possible that your firewall is
causing
the problem (let me guess - Zone Alarm?) - in which case (assuming
you're
behind a router) you should uninstall the firewall completely before
proceeding to attempt further work on the system.

How are you networking? what is the IP you are getting from the DHCP
server?
(is the server the other machine, or a router - what is the OS of the
other
machine?)

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to
NG's
"scorpio" wrote in message
...
I have tried to network my lap top with my desk top (the desk top was
what
i
was working on at the time) i went through the net work wizard,
turned
off
my
fire wall, and when i tried to re-start the system i got a blue page
with
error message: anerror has occured press ctrl alt delete to re start
or
enter
to return to windows (which none work as it seems page has frozen)
File
name
PRISMA02 (01) + 00019208 error OE:0028:C2A43CC8

"Noel Paton" wrote:

What is the EXACT wording of your error message?
What changes have you made to the system lately?
When does the error message appear?

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages
to
NG's
"scorpio" wrote in message
...
I am getting similar error message,0e:0028:c2a43cc8, i have tried
the
options
by Mart but no joy. Any help please. Also have tried to write a
new
question
in forum but unable so thought this was the most apt place.

"BK" wrote:

I get a blue screen error on startup. I can only do a safe mode
start.
File Name:IOS(05)+00001ED1 ERROR:OE:0028:CO02C29AD
I did a scanreg/restore with no luck.
I did a search on microsoft but did not find any information on
this error.

Thanks
BK

Try disabling (or rather uninstalling) UPnP from Add/Remove Programs|Windows
Setup
Then get rid of that virus commonly called Norton!
You may not realise it, but the vast majority of (non-operator-related)
problems in these ME groups are related to Symantec/Norton products - which
have a rather monotonous, and annoying habit of attempting to break Windows
ME in any way that they can find (I'm still waiting for someone from the
company to sue me for anything! - and they're almost as lackadaisical in
that as they are in fixing any of the many screw-up's they cause in ME!).
BTW, people may have to be sent on a special training course to get rid of
all traces of Norton - it's more pervasive than almost any known virus!
(PLEASE, Symantec - sue me!g)

Having got rid of Norton, your system will breathe a huge sigh of relief,
and probably start working the way it should do for the first time since
Norton was installed! - just make sure that you immediately install
appropriate replacement software. (NOT whatever Wanadoo happen to be pushing
this month!), which works happily with ME.
For advice as to options, start a new thread in this group - I have to
resist the temptation for the present, as I have to go cook supper!g

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"scorpio" wrote in message
news
I tried again but same outcome so have left alone until i can find out why
it
is happenning

"Mart" wrote:

Probably yes - but don't forget to set some SR points before you start,
you
can always get back if it belly-up again. Also, you may wish to wait
until
Noel returns before you proceed. He may well offer some very useful
advice -
to your advantage.

Mart


"scorpio" wrote in message
...
Sorted thanks chaps, i removed usb adapter and all sees fine. Do you
think
i
could risk re-installing the device to set upmy broadband connection
again,
thanks again for your help,

"Mart" wrote:

You mentioned that you are trying to link thru' a wireless router. As
Noel
has alluded, PRISMA02 seems to be related to D-Link products - a
Wireless
D-Link DWL-120 USB Adapter, perhaps?

Have you ever managed to get the wireless adapter to work (or even
install)
on this machine before or has this report only occurred since trying
to
install your adapter? Noel's suggestion of 'completely' removing the
device
and starting over again is likely to be the only way forward. BUT...

I'm sure that Noel will have further comments regarding NAV and I'll
leave
those to him g

Mart




"scorpio" wrote in message
...
Not quite sure if i have deleted all d link units, but have removed
some
but
still no joy, i presume these are external links ie printer etc. my
other
pc
is XP and i am trying to link through a wanadoo wireless router.
Fire
wall
is
Norton anti virus

"Noel Paton" wrote:

This error appears to be related to the drivers for a D-Link unit
I would boot to Safe Mode, and remove ALL entries for D-Link
hardware
in
Device Manager, and reboot to Normal Mode
This should force a reinstall of the drivers.

If this doesn't fix it, it's quite possible that your firewall is
causing
the problem (let me guess - Zone Alarm?) - in which case (assuming
you're
behind a router) you should uninstall the firewall completely
before
proceeding to attempt further work on the system.

How are you networking? what is the IP you are getting from the
DHCP
server?
(is the server the other machine, or a router - what is the OS of
the
other
machine?)

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages
to
NG's
"scorpio" wrote in message
...
I have tried to network my lap top with my desk top (the desk top
was
what
i
was working on at the time) i went through the net work wizard,
turned
off
my
fire wall, and when i tried to re-start the system i got a blue
page
with
error message: anerror has occured press ctrl alt delete to re
start
or
enter
to return to windows (which none work as it seems page has
frozen)
File
name
PRISMA02 (01) + 00019208 error OE:0028:C2A43CC8

"Noel Paton" wrote:

What is the EXACT wording of your error message?
What changes have you made to the system lately?
When does the error message appear?

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post
messages
to
NG's
"scorpio" wrote in message
...
I am getting similar error message,0e:0028:c2a43cc8, i have
tried
the
options
by Mart but no joy. Any help please. Also have tried to write
a
new
question
in forum but unable so thought this was the most apt place.

"BK" wrote:

I get a blue screen error on startup. I can only do a safe
mode
start.
File Name:IOS(05)+00001ED1 ERROR:OE:0028:CO02C29AD
I did a scanreg/restore with no luck.
I did a search on microsoft but did not find any information
on
this error.

Thanks
BK