USB 2.0 Flash Drive Driver for Win98

Hello, I have a integral 128mbUSB 2.0 Flash Drive and it
works perfectly fine with XP and others. But donest works
with Win 98. I checked the internet and it says that i
need some driver to make it work with win98. Please could
you help me as to where i could get the driver for the
flash drive for win98.
Many thanks.

Waheed wrote:
Hello, I have a integral 128mbUSB 2.0 Flash Drive and it
works perfectly fine with XP and others. But donest works
with Win 98. I checked the internet and it says that i
need some driver to make it work with win98. Please could
you help me as to where i could get the driver for the
flash drive for win98.
Many thanks.


Hi,

As far as I can tell, you need at least Windows 98 Second Edition for
that device. If the drivers were not supplied with the device, you'll
have to go to the manufacturer's web site and see if they have any
available. But as I said, a spot check of Integral 1228MB Flash Drives
shows Win98SE as a minimum requirement.

Upgrading from Windows 98 to Windows 98 Second Edition will likely cost
you much more than the device itself. You will then also need to add a
USB 2.0 PCI card if you desire the faster tranfer rate that USB 2.0
provides.

MM

You should have the drivers on the disk that came with it and no mention of
specifically 98SE.
http://www.integralmemory.com/product_categ.aspx?prid=5
quote
Complete with neck-strap, USB extension lead and drivers for Windows 98
No drivers required (except Windows 98)
Bootable on compatible systems (Windows XP/98)
Backward compatible with USB 1.1 (works at USB 1.1 speed)

System Requirements
USB Port (USB 2.0 for hi-speed data transfer)
Windows 98/ME/2000/XP
Mac OS 8.6 +
/quote

Start here and click on downloads to get a driver if you do not have one.
http://www.integralmemory.com/produc...spx?group_id=3

--
Brian A.

Conflicts start where information lacks.
http://www.dts-l.org/goodpost.htm

"Waheed" wrote in message
...
Hello, I have a integral 128mbUSB 2.0 Flash Drive and it
works perfectly fine with XP and others. But donest works
with Win 98. I checked the internet and it says that i
need some driver to make it work with win98. Please could
you help me as to where i could get the driver for the
flash drive for win98.
Many thanks.

Thanks everyone for your help. I have download the driver
needed for Win98 and its working fine. Thanks all of you
specially Brian from sending the link for 'Integral'
(manufacturer).
Regards
-----Original Message-----
You should have the drivers on the disk that came with
it and no mention of
specifically 98SE.
http://www.integralmemory.com/product_categ.aspx?prid=5
quote
Complete with neck-strap, USB extension lead and drivers
for Windows 98
No drivers required (except Windows 98)
Bootable on compatible systems (Windows XP/98)
Backward compatible with USB 1.1 (works at USB 1.1 speed)

System Requirements
USB Port (USB 2.0 for hi-speed data transfer)
Windows 98/ME/2000/XP
Mac OS 8.6 +
/quote

Start here and click on downloads to get a driver if you
do not have one.
http://www.integralmemory.com/product_group.aspx?
group_id=3

--
Brian A.

Conflicts start where information lacks.
http://www.dts-l.org/goodpost.htm

"Waheed" wrote in
message
...
Hello, I have a integral 128mbUSB 2.0 Flash Drive and
it
works perfectly fine with XP and others. But donest
works
with Win 98. I checked the internet and it says that i
need some driver to make it work with win98. Please
could
you help me as to where i could get the driver for the
flash drive for win98.
Many thanks.


.

Glad to have helped and hear you're up and about.

--
Brian A.

Conflicts start where information lacks.
http://www.dts-l.org/goodpost.htm

"Waheed" wrote in message
...
Thanks everyone for your help. I have download the driver
needed for Win98 and its working fine. Thanks all of you
specially Brian from sending the link for 'Integral'
(manufacturer).
Regards
-----Original Message-----
You should have the drivers on the disk that came with
it and no mention of
specifically 98SE.
http://www.integralmemory.com/product_categ.aspx?prid=5
quote
Complete with neck-strap, USB extension lead and drivers
for Windows 98
No drivers required (except Windows 98)
Bootable on compatible systems (Windows XP/98)
Backward compatible with USB 1.1 (works at USB 1.1 speed)

System Requirements
USB Port (USB 2.0 for hi-speed data transfer)
Windows 98/ME/2000/XP
Mac OS 8.6 +
/quote

Start here and click on downloads to get a driver if you
do not have one.
http://www.integralmemory.com/product_group.aspx?
group_id=3

--
Brian A.

Conflicts start where information lacks.
http://www.dts-l.org/goodpost.htm

"Waheed" wrote in
message
...
Hello, I have a integral 128mbUSB 2.0 Flash Drive and
it
works perfectly fine with XP and others. But donest
works
with Win 98. I checked the internet and it says that i
need some driver to make it work with win98. Please
could
you help me as to where i could get the driver for the
flash drive for win98.
Many thanks.


.