If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
CD Rom isn't found by windows.
My CD Rom isn't found by windows 98SE. One of the two installed is
recognized by the beginning BIOS hardware display. First a background question that might be related. Does it matter if the line in config.sys and autoexec.bat for the CD operate or not, once one gets to windows? (There are three lines in the config.sys that end in " /d:mscd001 " but if the oakcdrom.sys is allowed to run, config.sys freezes (as shown with step-by-step start). Then, even though the other two lines have run ok, the line in autexec.bat, c:\windows\command\mscdex.exe /d:mscd001 , shows an error because there is no mscd001!) Second, when windows starts, it only shows A:, B: and C: drives. In control panel/System, there used to be a whole array of hardware, but I deleted the multimedia lines that had ? marks, because the hardware has been changed, and all of a sudden there is NO hardware listed, only one group with a ? mark, and within that, one item with a question mark. The CD's I have include a CD writer and a DVD player. I thought that though they wouldn't run these fancy functions without their own software, but they would run as a basic CD reader with just what Windows includes. Yes? Any ideas? **which I have, but it's on another computer and I can't transfer it yet. Meirman -- If emailing, please let me know whether or not you are posting the same letter. Change domain to erols.com, if necessary. |
#2
|
|||
|
|||
There is no need for those entries to be in the autoexec.bat and config.sys.
Rename both of them by changing the extension to: .old Once done, reboot and see what happens. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "meirman" wrote in message ... My CD Rom isn't found by windows 98SE. One of the two installed is recognized by the beginning BIOS hardware display. First a background question that might be related. Does it matter if the line in config.sys and autoexec.bat for the CD operate or not, once one gets to windows? (There are three lines in the config.sys that end in " /d:mscd001 " but if the oakcdrom.sys is allowed to run, config.sys freezes (as shown with step-by-step start). Then, even though the other two lines have run ok, the line in autexec.bat, c:\windows\command\mscdex.exe /d:mscd001 , shows an error because there is no mscd001!) Second, when windows starts, it only shows A:, B: and C: drives. In control panel/System, there used to be a whole array of hardware, but I deleted the multimedia lines that had ? marks, because the hardware has been changed, and all of a sudden there is NO hardware listed, only one group with a ? mark, and within that, one item with a question mark. The CD's I have include a CD writer and a DVD player. I thought that though they wouldn't run these fancy functions without their own software, but they would run as a basic CD reader with just what Windows includes. Yes? Any ideas? **which I have, but it's on another computer and I can't transfer it yet. Meirman -- If emailing, please let me know whether or not you are posting the same letter. Change domain to erols.com, if necessary. |
#3
|
|||
|
|||
In microsoft.public.win98.multimedia on Fri, 19 Aug 2005 01:13:33
-0500 "Ron Badour" posted: There is no need for those entries to be in the autoexec.bat and config.sys. Rename both of them by changing the extension to: .old Once done, reboot and see what happens. Thanks for replying. Did what you said. Windows still doesen't find either CD drive. I switched one CD drive to a simple old CD drive, but it doesn't show up either. Each CD drive lights up during boot-up, and the Bios grid display lists both CD's. Then comes the table of plugn'play, or Non-plugn'play items, and one CD is listed but not the second one (along with 4 or 5 other things including a controller -- the lines fly by quickly.) But once in Windows 98SE, no evidence of either CD drive. Not listed in Explorer. In Device Manager, I deleted the lines with Question Marks, because I didn't have all the hardware that went with this previously used HD, and now there is nothing in Device Manager except one category with a question mark, and one line within that category, also with a question mark. Meirman Regards Ron Badour, MS MVP for W98 "meirman" wrote in message .. . My CD Rom isn't found by windows 98SE. One of the two installed is recognized by the beginning BIOS hardware display. ... Second, when windows starts, it only shows A:, B: and C: drives. In control panel/System, there used to be a whole array of hardware, but I deleted the multimedia lines that had ? marks, because the hardware has been changed, and all of a sudden there is NO hardware listed, only one group with a ? mark, and within that, one item with a question mark. The CD's I have include a CD writer and a DVD player. I thought that though they wouldn't run these fancy functions without their own software, but they would run as a basic CD reader with just what Windows includes. Yes? Any ideas? Meirman Meirman -- If emailing, please let me know whether or not you are posting the same letter. Change domain to erols.com, if necessary. |
#4
|
|||
|
|||
Try booting to safe mode and see what's listed in device manager. If there
are some old devices still listed there, remove them and re-boot. -- Jeff Richards MS MVP (Windows - Shell/User) "meirman" wrote in message ... In microsoft.public.win98.multimedia on Fri, 19 Aug 2005 01:13:33 -0500 "Ron Badour" posted: There is no need for those entries to be in the autoexec.bat and config.sys. Rename both of them by changing the extension to: .old Once done, reboot and see what happens. Thanks for replying. Did what you said. Windows still doesen't find either CD drive. I switched one CD drive to a simple old CD drive, but it doesn't show up either. Each CD drive lights up during boot-up, and the Bios grid display lists both CD's. Then comes the table of plugn'play, or Non-plugn'play items, and one CD is listed but not the second one (along with 4 or 5 other things including a controller -- the lines fly by quickly.) But once in Windows 98SE, no evidence of either CD drive. Not listed in Explorer. In Device Manager, I deleted the lines with Question Marks, because I didn't have all the hardware that went with this previously used HD, and now there is nothing in Device Manager except one category with a question mark, and one line within that category, also with a question mark. Meirman Regards Ron Badour, MS MVP for W98 "meirman" wrote in message . .. My CD Rom isn't found by windows 98SE. One of the two installed is recognized by the beginning BIOS hardware display. ... Second, when windows starts, it only shows A:, B: and C: drives. In control panel/System, there used to be a whole array of hardware, but I deleted the multimedia lines that had ? marks, because the hardware has been changed, and all of a sudden there is NO hardware listed, only one group with a ? mark, and within that, one item with a question mark. The CD's I have include a CD writer and a DVD player. I thought that though they wouldn't run these fancy functions without their own software, but they would run as a basic CD reader with just what Windows includes. Yes? Any ideas? Meirman Meirman -- If emailing, please let me know whether or not you are posting the same letter. Change domain to erols.com, if necessary. |
#5
|
|||
|
|||
Normally, unless the PC is terribly dated, the bios should find both ATAPI
devices. Some CD reading devices require a mscdex entry to work in wondows. But, its rare. You have a name brand PC, if so what is the brand name? You or someone changed hardware. What hardware was changed from what to what? Was the hard drive pulled from another PC? If so, did it have the original operating system while it was moved? "meirman" wrote in message ... My CD Rom isn't found by windows 98SE. One of the two installed is recognized by the beginning BIOS hardware display. First a background question that might be related. Does it matter if the line in config.sys and autoexec.bat for the CD operate or not, once one gets to windows? (There are three lines in the config.sys that end in " /d:mscd001 " but if the oakcdrom.sys is allowed to run, config.sys freezes (as shown with step-by-step start). Then, even though the other two lines have run ok, the line in autexec.bat, c:\windows\command\mscdex.exe /d:mscd001 , shows an error because there is no mscd001!) Second, when windows starts, it only shows A:, B: and C: drives. In control panel/System, there used to be a whole array of hardware, but I deleted the multimedia lines that had ? marks, because the hardware has been changed, and all of a sudden there is NO hardware listed, only one group with a ? mark, and within that, one item with a question mark. The CD's I have include a CD writer and a DVD player. I thought that though they wouldn't run these fancy functions without their own software, but they would run as a basic CD reader with just what Windows includes. Yes? Any ideas? **which I have, but it's on another computer and I can't transfer it yet. Meirman -- If emailing, please let me know whether or not you are posting the same letter. Change domain to erols.com, if necessary. |
#6
|
|||
|
|||
In microsoft.public.win98.multimedia on Fri, 26 Aug 2005 20:23:35
+1000 "Jeff Richards" posted: Try booting to safe mode and see what's listed in device manager. If there are some old devices still listed there, remove them and re-boot. Sounds good. I went to safe mode and there was a big long list of devices in Device manager. I didn't look if there was a CD, because iirc that is one of the things that can't be used in Safe mode. There was one device with a ? mark, and I deleted it. When I got back to regular mode, the ? mark I referred to in the prior post was gone, and now there was only one line iln Device Manager, a blue line at the top. I think it said Windows, and there was nothing underneath, not even a question mark. Went bakc to safe mode, and there was that long list again. Meirman -- If emailing, please let me know whether or not you are posting the same letter. Change domain to erols.com, if necessary. |
#7
|
|||
|
|||
In microsoft.public.win98.multimedia on Sat, 27 Aug 2005 06:16:31
-0500 "Lil' Dave" posted: Normally, unless the PC is terribly dated, the bios should find both ATAPI devices. The Mobo is pretty new. It accepts an 800Mhz processor and maybe one step higher than that. Some CD reading devices require a mscdex entry to work in wondows. But, its rare. You have a name brand PC, if so what is the brand name? The motherboard is an Iwill. The model number is in the basement. You or someone changed hardware. What hardware was changed from what to what? Every piece of hardware came from somewhere different in my friend's fleet of computers. Two at his house, two at his mother's, and one or two others, all of which get upgraded either once in a while or all in the same year. (I wish he would give me the CD's that come with the devices, but he says I should download the files. Of course that usually only gives drivers, and not the application programs most things come with. But beggars can't be choosers.) Was the hard drive pulled from another PC? If so, did it have the original operating system while it was moved? I'm sure it was. I don't plan to use it, only 4 gig, but I thought it would be good enough to test with. I haven't figured out the best way to do it, but I want to clone my current harddrive, with all my email complete and assemble the new one before I retrieve email again. So I want to know all the hardware I plan to use works, and works well with this mobo. "meirman" wrote in message .. . My CD Rom isn't found by windows 98SE. One of the two installed is recognized by the beginning BIOS hardware display. First a background question that might be related. Does it matter if the line in config.sys and autoexec.bat for the CD operate or not, once one gets to windows? (There are three lines in the config.sys that end in " /d:mscd001 " but if the oakcdrom.sys is allowed to run, config.sys freezes (as shown with step-by-step start). Then, even though the other two lines have run ok, the line in autexec.bat, c:\windows\command\mscdex.exe /d:mscd001 , shows an error because there is no mscd001!) Second, when windows starts, it only shows A:, B: and C: drives. In control panel/System, there used to be a whole array of hardware, but I deleted the multimedia lines that had ? marks, because the hardware has been changed, and all of a sudden there is NO hardware listed, only one group with a ? mark, and within that, one item with a question mark. The CD's I have include a CD writer and a DVD player. I thought that though they wouldn't run these fancy functions without their own software, but they would run as a basic CD reader with just what Windows includes. Yes? Any ideas? **which I have, but it's on another computer and I can't transfer it yet. Meirman -- If emailing, please let me know whether or not you are posting the same letter. Change domain to erols.com, if necessary. Meirman -- If emailing, please let me know whether or not you are posting the same letter. Change domain to erols.com, if necessary. |
#8
|
|||
|
|||
And what happened when you deleted all the old devices from within safe
mode? -- Jeff Richards MS MVP (Windows - Shell/User) "meirman" wrote in message ... In microsoft.public.win98.multimedia on Fri, 26 Aug 2005 20:23:35 +1000 "Jeff Richards" posted: Try booting to safe mode and see what's listed in device manager. If there are some old devices still listed there, remove them and re-boot. Sounds good. I went to safe mode and there was a big long list of devices in Device manager. I didn't look if there was a CD, because iirc that is one of the things that can't be used in Safe mode. There was one device with a ? mark, and I deleted it. When I got back to regular mode, the ? mark I referred to in the prior post was gone, and now there was only one line iln Device Manager, a blue line at the top. I think it said Windows, and there was nothing underneath, not even a question mark. Went bakc to safe mode, and there was that long list again. |
#9
|
|||
|
|||
In microsoft.public.win98.multimedia on Mon, 29 Aug 2005 20:41:27
+1000 "Jeff Richards" posted: And what happened when you deleted all the old devices from within safe mode? I'm working on that now. I will if possible let you know in a couple days. When I got back to regular mode, the ? mark I referred to in the prior post was gone, and now there was only one line iln Device Manager, a blue line at the top. I think it said Windows, and there was nothing underneath, not even a question mark. It said "Computer", not "Windows". Sorry. Meirman -- If emailing, please let me know whether or not you are posting the same letter. Change domain to erols.com, if necessary. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SCANDISK on 6GB drive producing Errors at 2.09GB to end. | Jerry | Disk Drives | 15 | July 21st 05 07:00 PM |
Can't connect to my network printer | Martin Healy | Networking | 8 | July 6th 05 10:35 PM |
Registery problem? | Paul | General | 15 | December 8th 04 11:29 AM |
BAD BAT | Pebble | General | 41 | December 2nd 04 09:51 PM |
Folder Named [C:\Program] Opens Automatically on Start | Ted Belben | General | 2 | September 16th 04 11:39 PM |