If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Invalid page fault
I have this error message "Explorer caused an invalid
page fault in module explorer.exe at 0167:00401f31" wehen start up. I have try a few method but no help. I have another PC that run Win 98, can I erase all files in c:/windows/system on my downed PC and copy all files from the OK PC to the same location. Baxter. |
#2
|
|||
|
|||
Here's one thing...
http://support.microsoft.com/default...11&Product=w98 Invalid Page Fault in Module Explorer.exe (296211) - After you upgrade your Juno software, or download and install Juno Web, you receive an error message similar to the following: Explorer.exe caused an invalid page fault in explorer.exe at 0157F: 00401F31 -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in message ... | I have this error message "Explorer caused an invalid | page fault in module explorer.exe at 0167:00401f31" wehen | start up. I have try a few method but no help. I have | another PC that run Win 98, can I erase all files in | c:/windows/system on my downed PC and copy all files from | the OK PC to the same location. | | Baxter. |
#3
|
|||
|
|||
No, I did not install Juno but I did try the method
suggested but cannot solve. Baxter. -----Original Message----- Here's one thing... http://support.microsoft.com/default.aspx?scid=kb;en- us;296211&Product=w98 Invalid Page Fault in Module Explorer.exe (296211) - After you upgrade your Juno software, or download and install Juno Web, you receive an error message similar to the following: Explorer.exe caused an invalid page fault in explorer.exe at 0157F: 00401F31 -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in message ... | I have this error message "Explorer caused an invalid | page fault in module explorer.exe at 0167:00401f31" wehen | start up. I have try a few method but no help. I have | another PC that run Win 98, can I erase all files in | c:/windows/system on my downed PC and copy all files from | the OK PC to the same location. | | Baxter. . |
#4
|
|||
|
|||
I had hopes for that one, because it had your number: 00401F31. Well,
here is what I meant to originally post. Try this one, especially if you also cannot boot to Safe Mode (hold F5 or CTRL as you boot to see)... Explorer & IE are basically one & the same. Therefore, may as well try this write-up, originally from a Gateway WEB site, which is a temporary reversion to an earlier version of IE... ONE THING: Do nothing more than stated here using Winfile, because, if you move a file with it, you will lose that file's LFN (Long File Name) in the destination. Desktop Icons and Taskbar Are Missing Affected Products: Software, System CDs Affected Operating Systems: Windows® 98 , Windows® 98 SE, Windows® Me ISSUE: After starting Microsoft® Windows® 98 or Windows Me, the taskbar is missing and there are no icons. When starting Windows, the taskbar may flash on for a brief second and then disappear. The only display visible is the background wallpaper and the mouse cursor. Pressing CTRL+ALT+DELETE brings up the Close Program dialog box, but selecting End Task on the items on the list may not have an effect. When the computer is started into Safe mode, the issue still occurs. Running Scanreg /Restore does not resolve the issue. There have been several reports that the issue occurred when restarting the computer after receiving a dialog box that displays "Virus/spyware found. Do you wish to remove?" or "Do you want to install Spyware Monitor?" The dialog box only has Yes or No selections, and selecting either can cause the issue. There is no X to close the dialog box, however pressing CTRL+ALT+DELETE to bring up the Close Program dialog box lists a "Remove found spyware?" entry, which can be end tasked. (1) Press CTRL+ALT+DELETE, & click Shut Down. (2) After the computer has been shut down, turn on the computer. Hold CTRL as you boot for the Startup Menu, or begin pressing the F8 key in one-second intervals. If you complete this step successfully, the Microsoft Windows Startup Menu is displayed. If no menu is displayed and Windows starts up normally, repeat this step. (3) At the Microsoft Windows Startup Menu, use the ARROW keys to select "Command Prompt Only", and then press the ENTER key. (4) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (3) In the C:\Windows\SYSTEM.INI file, locate the line of text under the [boot] section that lists "Shell=Explorer.exe". This is typically the third line in the file. (4) Edit the "Shell=Explorer.exe" line by deleting the "Explorer.exe" text and replacing it with "Winfile.exe". The line should list the following: Shell=Winfile.exe (5) To save the changes, press the ALT+F keys. (6) A menu displays in the upper left corner of the screen. Press the X key to exit. (7) Press ENTER to save the changes and return to the command prompt. (TAB would move you to the next button.) (8) At the command prompt, restart the computer by pressing the CTRL+ALT+DELETE keys. Once Windows has restarted, it starts into the Windows File Manager (Winfile.exe). (9) In the File Manager window, double-click "progra~1" in the left hand window to open the Program Files folder. (10) Double-click "intern~1" in the left hand window to open the Internet Explorer folder. (11) Double-click "setup" in the left hand window to open the Setup folder. (12) In the File Manager window, double-click "Setup.exe" in the right hand window to launch Internet Explorer setup. NOTE: If the setup folder is not available, Internet Explorer has not been updated and a previous version of Internet Explorer cannot be restored. You cannot use this method. Close "Winfile", shut down, & post back, or try the URL at the very bottom of this post, which is an over-install of IE. (13) In the Internet Explorer 6 and Internet Tools Setup window, click OK. (14) In the Setup Message dialog box, click Yes to restore the previous version of Internet Explorer. (15) Internet Explorer setup removes components. (16) In the Internet Explorer 6 and Internet Tools - Restart Windows dialog box, click Restart Windows. When the computer is restarting, hold CTRL for the Startup Menu, or begin pressing the F8 key in one-second intervals. If you complete this step successfully, the Microsoft Windows Startup Menu is displayed. If no menu is displayed and Windows starts up normally, repeat this step. (17) At the Microsoft Windows Startup Menu, use the ARROW keys to select Command prompt only, and then press ENTER. (18) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (19) In the C:\Windows\SYSTEM.INI file, locate the line of text under the [boot] section that lists "Shell=Winfile.exe". This is typically the third line in the file. (20) Edit the "Shell=Winfile.exe" line by deleting the "Winfile.exe" text and replacing it with "Explorer.exe". The line should list the following: Shell=Explorer.exe (21) To save the changes, press the ALT+F keys. (22) A menu displays in the upper left corner of the screen. Press the X key to exit. (23) Press ENTER to save the changes and return to the command prompt. (TAB would move you to the next button.) (24) At the command prompt, restart the computer by pressing the CTRL+ALT+DELETE keys (25) Windows starts to a blue screen, but will still be accessing the hard drive for a period of time. When finished, Windows is on the desktop with icons, but an older version of Internet Explorer is installed. You should update your antivirus software, and then perform Windows Update to install a new version of Internet Explorer again. ....snip http://support.microsoft.com/default.aspx?scid=kb;[LN];249191 Blank Desktop or Illegal Operations Error Message After You Install Internet Explorer. This is a temporary reversion to an earlier IE, IF that option is present. http://support.microsoft.com/?kbid=293174 Over-Install IE in Progman. This is an over-install of IE. I have a detailed write-up for it, if you want. -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in message ... | No, I did not install Juno but I did try the method | suggested but cannot solve. | | Baxter. | -----Original Message----- | Here's one thing... | http://support.microsoft.com/default.aspx?scid=kb;en- | us;296211&Product=w98 | Invalid Page Fault in Module Explorer.exe | (296211) - After you upgrade your Juno software, or | download and install | Juno Web, you receive an error message similar to the | following: | Explorer.exe caused an invalid page fault in | explorer.exe at 0157F: | 00401F31 | | | -- | Thanks or Good Luck, | There may be humor in this post, and, | Naturally, you will not sue, | should things get worse after this, | PCR | | "baxter" wrote in | message | ... | | I have this error message "Explorer caused an invalid | | page fault in module explorer.exe at 0167:00401f31" | wehen | | start up. I have try a few method but no help. I have | | another PC that run Win 98, can I erase all files in | | c:/windows/system on my downed PC and copy all files | from | | the OK PC to the same location. | | | | Baxter. | | | . | |
#5
|
|||
|
|||
I have try the recommended way(article=20
249191,293174,296211) but cannot solve. How can I install=20 Internet Explorer without using the way in the above=20 article? Baxter. -----Original Message----- I had hopes for that one, because it had your number:=20 00401F31. Well, here is what I meant to originally post. Try this one,=20 especially if you also cannot boot to Safe Mode (hold F5 or CTRL as you=20 boot to see)... Explorer & IE are basically one & the same. Therefore,=20 may as well try this write-up, originally from a Gateway WEB site, which=20 is a temporary reversion to an earlier version of IE... ONE THING: Do nothing more than stated here using=20 Winfile, because, if you move a file with it, you will lose that file's LFN=20 (Long File Name) in the destination. Desktop Icons and Taskbar Are Missing Affected Products: Software, System CDs Affected Operating Systems: Windows=AE 98 , Windows=AE 98 SE, Windows=AE Me ISSUE: After starting Microsoft=AE Windows=AE 98 or Windows Me, the taskbar is missing and there are no icons. When starting Windows, the taskbar may flash on for a brief second and then disappear. The only display visible is=20 the background wallpaper and the mouse cursor. Pressing CTRL+ALT+DELETE brings up the Close Program dialog box, but selecting End Task on the items on the list may not have an effect. When the computer is started into Safe mode, the issue still occurs. Running Scanreg /Restore does not resolve the issue. There have been several reports that the issue occurred when restarting the computer after receiving a dialog box that displays "Virus/spyware found. Do you wish to remove?" or "Do you want to install Spyware Monitor?" The dialog box only has Yes or No selections, and selecting either can cause the issue. There is no X to close the dialog box, however pressing CTRL+ALT+DELETE to bring up the Close Program dialog box lists a "Remove found spyware?" entry, which can be end tasked. (1) Press CTRL+ALT+DELETE, & click Shut Down. (2) After the computer has been shut down, turn on the=20 computer. Hold CTRL as you boot for the Startup Menu, or begin pressing=20 the F8 key in one-second intervals. If you complete this step=20 successfully, the Microsoft Windows Startup Menu is displayed. If no menu=20 is displayed and Windows starts up normally, repeat this step. (3) At the Microsoft Windows Startup Menu, use the ARROW=20 keys to select "Command Prompt Only", and then press the ENTER key. (4) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (3) In the C:\Windows\SYSTEM.INI file, locate the line=20 of text under the [boot] section that lists "Shell=3DExplorer.exe". This is=20 typically the third line in the file. (4) Edit the "Shell=3DExplorer.exe" line by deleting=20 the "Explorer.exe" text and replacing it with "Winfile.exe". The line=20 should list the following: Shell=3DWinfile.exe (5) To save the changes, press the ALT+F keys. (6) A menu displays in the upper left corner of the=20 screen. Press the X key to exit. (7) Press ENTER to save the changes and return to the=20 command prompt. (TAB would move you to the next button.) (8) At the command prompt, restart the computer by=20 pressing the CTRL+ALT+DELETE keys. Once Windows has restarted, it=20 starts into the Windows File Manager (Winfile.exe). (9) In the File Manager window, double-click "progra~1"=20 in the left hand window to open the Program Files folder. (10) Double-click "intern~1" in the left hand window to=20 open the Internet Explorer folder. (11) Double-click "setup" in the left hand window to=20 open the Setup folder. (12) In the File Manager window, double- click "Setup.exe" in the right hand window to launch Internet Explorer setup. NOTE: If the setup folder is not available, Internet=20 Explorer has not been updated and a previous version of Internet Explorer=20 cannot be restored. You cannot use this method. Close "Winfile",=20 shut down, & post back, or try the URL at the very bottom of this post,=20 which is an over-install of IE. (13) In the Internet Explorer 6 and Internet Tools Setup=20 window, click OK. (14) In the Setup Message dialog box, click Yes to=20 restore the previous version of Internet Explorer. (15) Internet Explorer setup removes components. (16) In the Internet Explorer 6 and Internet Tools -=20 Restart Windows dialog box, click Restart Windows. When the computer is restarting, hold CTRL for the=20 Startup Menu, or begin pressing the F8 key in one-second intervals. If=20 you complete this step successfully, the Microsoft Windows Startup Menu is=20 displayed. If no menu is displayed and Windows starts up normally,=20 repeat this step. (17) At the Microsoft Windows Startup Menu, use the=20 ARROW keys to select Command prompt only, and then press ENTER. (18) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (19) In the C:\Windows\SYSTEM.INI file, locate the line=20 of text under the [boot] section that lists "Shell=3DWinfile.exe". This=20 is typically the third line in the file. (20) Edit the "Shell=3DWinfile.exe" line by deleting=20 the "Winfile.exe" text and replacing it with "Explorer.exe". The line=20 should list the following: Shell=3DExplorer.exe (21) To save the changes, press the ALT+F keys. (22) A menu displays in the upper left corner of the=20 screen. Press the X key to exit. (23) Press ENTER to save the changes and return to the=20 command prompt. (TAB would move you to the next button.) (24) At the command prompt, restart the computer by=20 pressing the CTRL+ALT+DELETE keys (25) Windows starts to a blue screen, but will still be accessing the hard drive for a period of time. When finished, Windows is on the desktop with icons, but an older version of Internet Explorer is installed. You should update your antivirus software, and then perform Windows Update to install a new version of Internet Explorer again. ....snip http://support.microsoft.com/default.aspx?scid=3Dkb; [LN];249191 Blank Desktop or Illegal Operations Error Message After=20 You Install Internet Explorer. This is a temporary reversion to an=20 earlier IE, IF that option is present. http://support.microsoft.com/?kbid=3D293174 Over-Install IE in Progman. This is an over-install of=20 IE. I have a detailed write-up for it, if you want. --=20 Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in=20 message ... | No, I did not install Juno but I did try the method | suggested but cannot solve. | | Baxter. | -----Original Message----- | Here's one thing... | http://support.microsoft.com/default.aspx?scid=3Dkb;en- | us;296211&Product=3Dw98 | Invalid Page Fault in Module Explorer.exe | (296211) - After you upgrade your Juno software, or | download and install | Juno Web, you receive an error message similar to the | following: | Explorer.exe caused an invalid page fault in | explorer.exe at 0157F: | 00401F31 | | | --=20 | Thanks or Good Luck, | There may be humor in this post, and, | Naturally, you will not sue, | should things get worse after this, | PCR | | "baxter" wrote=20 in | message | ... | | I have this error message "Explorer caused an=20 invalid | | page fault in module explorer.exe at 0167:00401f31" | wehen | | start up. I have try a few method but no help. I=20 have | | another PC that run Win 98, can I erase all files in | | c:/windows/system on my downed PC and copy all files | from | | the OK PC to the same location. | | | | Baxter. | | | . | . |
#7
|
|||
|
|||
Ok! Heres is what happens.
When I boot I receive the following message: "This program has performed an illegal operation and will=20 be shut down. If the problem persists, contact the program vendor." {Details} EXPLORER caused an invaild page fault in module=20 EXPLORER.EXE at 0167:00401f31. I select Close, the wallpaper is there but without=20 taskbar and desktop icon. When I hit Ctrl-Alt-Del, the list of active=20 programs is empty. Now, I will hit Ctrl-Alt-Del, and reload in Windows 98SE=20 in Normal mode and show the same error again. I then try the recommendation on article no. 269211, http://support.microsoft.com/default.aspx?scid=3Dkb;en- us;296211 but won't help. Later I try the step posted on 29 Sept but when reach=20 step 12 and click "setup.exe". A window title "setup"=20 with message "was not completed sucessfully". I did not proceed to next step bcos the setup cannot be=20 completed but don't what problem. Next try steps in article no. 249191,=20 http://support.microsoft.com/default.aspx?scid=3Dkb; [LN];249191. Step 3 in this is the same as article=20 269211, won't help. In step 6, a window appear, with=20 selection for "add a component" or "repair Internet=20 Explorer". This is not explain in article. But I select=20 repair option and another window with yes and no option=20 whether to repair IE. I choose yes, but a message show=20 IE6 could not be repaired. Please run setup again to=20 reinstall all components". Fail! How do I reinstall=20 components? Next try steps in article no. 293174,=20 http://support.microsoft.com/?kbid=3D293174. Try method 1,=20 Add/remove programs windows is empty(blank) and don't=20 have MS IE5 and internet tools, cannot proceed to=20 add/remove and repair. Try method 2, same, empty screen.=20 Bottom of this article, "NOTE: If both methods fail, you=20 may have to completely reinstall the Windows 98 operating=20 system. It should be noted that the reinstallation of=20 Windows 98 may result in the loss of some Windows=20 configuration information and/or data." I can follow until the editing of system.ini and safe it=20 and boot to Winfile but the results is not what as stated=20 in article or as suggested. What next? Same message and response in SAFE MODE!! There is another posting on 3th Oct with the same error=20 message but mine don't so much other error. Hope this explanation is better. Baxter. -----Original Message----- (1) Well, where did it go wrong in the way I posted? Did it get to Windows running Winfile? Be specific. It would be best to get that one to=20 work. (2) Can you boot to Windows Normal Mode? (3) Can you boot to Safe Mode? --=20 Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in=20 message ... I have try the recommended way(article 249191,293174,296211) but cannot solve. How can I install Internet Explorer without using the way in the above article? Baxter. -----Original Message----- I had hopes for that one, because it had your number: 00401F31. Well, here is what I meant to originally post. Try this one, especially if you also cannot boot to Safe Mode (hold F5 or CTRL as you boot to see)... Explorer & IE are basically one & the same. Therefore, may as well try this write-up, originally from a Gateway WEB site, which is a temporary reversion to an earlier version of IE... ONE THING: Do nothing more than stated here using Winfile, because, if you move a file with it, you will lose that file's LFN (Long File Name) in the destination. Desktop Icons and Taskbar Are Missing Affected Products: Software, System CDs Affected Operating Systems: Windows=AE 98 , Windows=AE 98=20 SE, Windows=AE Me ISSUE: After starting Microsoft=AE Windows=AE 98 or Windows Me, the taskbar is missing and there are no icons. When starting Windows, the taskbar may flash on for a brief second and then disappear. The only display visible is the background wallpaper and the mouse cursor. Pressing CTRL+ALT+DELETE brings up the Close Program dialog box, but selecting End Task on the items on the list may not have an effect. When the computer is started into Safe mode, the issue still occurs. Running Scanreg /Restore does not resolve the issue. There have been several reports that the issue occurred when restarting the computer after receiving a dialog=20 box that displays "Virus/spyware found. Do you wish to remove?" or "Do you want to install Spyware Monitor?"=20 The dialog box only has Yes or No selections, and selecting either can cause the issue. There is no X to close the dialog box, however pressing CTRL+ALT+DELETE to bring up the Close Program dialog box lists a "Remove found spyware?" entry, which can be end tasked. (1) Press CTRL+ALT+DELETE, & click Shut Down. (2) After the computer has been shut down, turn on the computer. Hold CTRL as you boot for the Startup Menu, or begin pressing the F8 key in one-second intervals. If you complete this step successfully, the Microsoft Windows Startup Menu is displayed. If no menu is displayed and Windows starts up normally, repeat this step. (3) At the Microsoft Windows Startup Menu, use the ARROW keys to select "Command Prompt Only", and then press the ENTER key. (4) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (3) In the C:\Windows\SYSTEM.INI file, locate the line of text under the [boot] section that lists "Shell=3DExplorer.exe". This is typically the third line in the file. (4) Edit the "Shell=3DExplorer.exe" line by deleting the "Explorer.exe" text and replacing it with "Winfile.exe". The line should list the following: Shell=3DWinfile.exe (5) To save the changes, press the ALT+F keys. (6) A menu displays in the upper left corner of the screen. Press the X key to exit. (7) Press ENTER to save the changes and return to the command prompt. (TAB would move you to the next button.) (8) At the command prompt, restart the computer by pressing the CTRL+ALT+DELETE keys. Once Windows has restarted, it starts into the Windows File Manager (Winfile.exe). (9) In the File Manager window, double-click "progra~1" in the left hand window to open the Program Files folder. (10) Double-click "intern~1" in the left hand window to open the Internet Explorer folder. (11) Double-click "setup" in the left hand window to open the Setup folder. (12) In the File Manager window, double- click "Setup.exe" in the right hand window to launch Internet Explorer setup. NOTE: If the setup folder is not available, Internet Explorer has not been updated and a previous version of Internet Explorer cannot be restored. You cannot use this method. Close "Winfile", shut down, & post back, or try the URL at the very bottom of this post, which is an over-install of IE. (13) In the Internet Explorer 6 and Internet Tools Setup window, click OK. (14) In the Setup Message dialog box, click Yes to restore the previous version of Internet Explorer. (15) Internet Explorer setup removes components. (16) In the Internet Explorer 6 and Internet Tools - Restart Windows dialog box, click Restart Windows. When the computer is restarting, hold CTRL for the Startup Menu, or begin pressing the F8 key in one-second intervals. If you complete this step successfully, the Microsoft Windows Startup Menu is displayed. If no menu is displayed and Windows starts up normally, repeat this step. (17) At the Microsoft Windows Startup Menu, use the ARROW keys to select Command prompt only, and then press ENTER. (18) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (19) In the C:\Windows\SYSTEM.INI file, locate the line of text under the [boot] section that lists "Shell=3DWinfile.exe". This is typically the third line in the file. (20) Edit the "Shell=3DWinfile.exe" line by deleting the "Winfile.exe" text and replacing it with "Explorer.exe". The line should list the following: Shell=3DExplorer.exe (21) To save the changes, press the ALT+F keys. (22) A menu displays in the upper left corner of the screen. Press the X key to exit. (23) Press ENTER to save the changes and return to the command prompt. (TAB would move you to the next button.) (24) At the command prompt, restart the computer by pressing the CTRL+ALT+DELETE keys (25) Windows starts to a blue screen, but will still be accessing the hard drive for a period of time. When finished, Windows is on the desktop with icons, but an older version of Internet Explorer is installed. You should update your antivirus software, and then perform Windows Update to install a new version of Internet Explorer again. ....snip http://support.microsoft.com/default.aspx?scid=3Dkb; [LN];249191 Blank Desktop or Illegal Operations Error Message After You Install Internet Explorer. This is a temporary reversion to an earlier IE, IF that option is present. http://support.microsoft.com/?kbid=3D293174 Over-Install IE in Progman. This is an over-install of IE. I have a detailed write-up for it, if you want. --=20 Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in message ... | No, I did not install Juno but I did try the method | suggested but cannot solve. | | Baxter. | -----Original Message----- | Here's one thing... | http://support.microsoft.com/default.aspx?scid=3Dkb;en- | us;296211&Product=3Dw98 | Invalid Page Fault in Module Explorer.exe | (296211) - After you upgrade your Juno software, or | download and install | Juno Web, you receive an error message similar to the | following: | Explorer.exe caused an invalid page fault in | explorer.exe at 0157F: | 00401F31 | | | --=20 | Thanks or Good Luck, | There may be humor in this post, and, | Naturally, you will not sue, | should things get worse after this, | PCR | | "baxter" wrote in | message | ... | | I have this error message "Explorer caused an invalid | | page fault in module explorer.exe at 0167:00401f31" | wehen | | start up. I have try a few method but no help. I have | | another PC that run Win 98, can I erase all files=20 in | | c:/windows/system on my downed PC and copy all=20 files | from | | the OK PC to the same location. | | | | Baxter. | | | . | . . |
#8
|
|||
|
|||
Yes, this explanation is better. You cannot boot to Normal or Safe Mode,
& Explorer complains over itself. Therefore, this is the right fix for you. BUT, what is going wrong? (We don't want to reinstall all of Windows. We JUST want to over-install IE.) Do you know what version of IE you are? My guess from Properties, Details button, of R-Clk your post... X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300 ....is that you are IE5.5. THAT one should be repairable. (But it isn't working.) Let me look carefully at what you are doing... So, Step (12) of the procedure did not work. That means you didn't opt to retain the ability to revert to an earlier IE when you installed IE5.5. So, next would be to over-install IE5.5. Let's see... You went to the wrong one (Q249191), which basically does the same as the steps I posted-- a reversion. But later you made it to the Over-Install of IE (Q293174). Here, this is my write-up for that. (I have removed references to IE6 to simplify)... (1) Hold CTRL as you boot for the Startup Menu. Select to boot to the "Command Prompt Only" (DOS). (2) At DOS... (a) Enter "EDIT C:\Windows\System.ini" (b) In the [Boot] section, change "Shell=Explorer.exe" to "Shell=Progman.exe" (c) Alt-F-X-ENTER (pressed separately) to exit Edit. (TAB to get to buttons. ENTER to accept a button.) (d) Ctrl-Alt-Del to Windows running Progman. (3) In Progman, over-install IE, which basically is E. If it asks for an internet connection, let it connect, if it can. Anyway, select "Custom" & only check the items that have a bold checkbox, to avoid it will want the internet. Do not take the Multi-language Support, if you've done without it this long. The only one in bold there for me is Language Auto-Selection. Perhaps try for just that. ....snip of IE6Setup references... If you are IE5, "ie5setup.exe" will be in "C:\Windows Update Setup Files". (You may also use the copy in "C:\Program Files\Internet Explorer", which is "C:\Progra~1\Intern~1" to DOS. Well, if one fails, then try the other) (a) File menu, Run, Browse button. Folders pane will be open at "C:\Windows" with sub-folders below it. (b) D-Clk "C:\" in the Folders pane to go up one level. (c) Scroll down the Folders pane & D-Clk "window~1". (d) "ie5setup.exe" now appears in the left (File Name) pane. (e) D-CLK "IE5Setup.exe" to run it. (4) Reboot back to DOS. Then... (a) Enter "EDIT C:\Windows\System.ini" (b) In the [Boot] section, change back to "Shell=Explorer.exe" (c) Alt-F-X-ENTER to EXIT. (TAB to get to buttons. ENTER to accept a button.) (d) Ctrl-Alt-Del to Windows. OK, that's it. Hope you are back up. -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in message ... Ok! Heres is what happens. When I boot I receive the following message: "This program has performed an illegal operation and will be shut down. If the problem persists, contact the program vendor." {Details} EXPLORER caused an invaild page fault in module EXPLORER.EXE at 0167:00401f31. I select Close, the wallpaper is there but without taskbar and desktop icon. When I hit Ctrl-Alt-Del, the list of active programs is empty. Now, I will hit Ctrl-Alt-Del, and reload in Windows 98SE in Normal mode and show the same error again. I then try the recommendation on article no. 269211, http://support.microsoft.com/default...b;en-us;296211 but won't help. Later I try the step posted on 29 Sept but when reach step 12 and click "setup.exe". A window title "setup" with message "was not completed sucessfully". I did not proceed to next step bcos the setup cannot be completed but don't what problem. Next try steps in article no. 249191, http://support.microsoft.com/default.aspx?scid=kb; [LN];249191. Step 3 in this is the same as article 269211, won't help. In step 6, a window appear, with selection for "add a component" or "repair Internet Explorer". This is not explain in article. But I select repair option and another window with yes and no option whether to repair IE. I choose yes, but a message show IE6 could not be repaired. Please run setup again to reinstall all components". Fail! How do I reinstall components? Next try steps in article no. 293174, http://support.microsoft.com/?kbid=293174. Try method 1, Add/remove programs windows is empty(blank) and don't have MS IE5 and internet tools, cannot proceed to add/remove and repair. Try method 2, same, empty screen. Bottom of this article, "NOTE: If both methods fail, you may have to completely reinstall the Windows 98 operating system. It should be noted that the reinstallation of Windows 98 may result in the loss of some Windows configuration information and/or data." I can follow until the editing of system.ini and safe it and boot to Winfile but the results is not what as stated in article or as suggested. What next? Same message and response in SAFE MODE!! There is another posting on 3th Oct with the same error message but mine don't so much other error. Hope this explanation is better. Baxter. -----Original Message----- (1) Well, where did it go wrong in the way I posted? Did it get to Windows running Winfile? Be specific. It would be best to get that one to work. (2) Can you boot to Windows Normal Mode? (3) Can you boot to Safe Mode? -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in message ... I have try the recommended way(article 249191,293174,296211) but cannot solve. How can I install Internet Explorer without using the way in the above article? Baxter. -----Original Message----- I had hopes for that one, because it had your number: 00401F31. Well, here is what I meant to originally post. Try this one, especially if you also cannot boot to Safe Mode (hold F5 or CTRL as you boot to see)... Explorer & IE are basically one & the same. Therefore, may as well try this write-up, originally from a Gateway WEB site, which is a temporary reversion to an earlier version of IE... ONE THING: Do nothing more than stated here using Winfile, because, if you move a file with it, you will lose that file's LFN (Long File Name) in the destination. Desktop Icons and Taskbar Are Missing Affected Products: Software, System CDs Affected Operating Systems: Windows® 98 , Windows® 98 SE, Windows® Me ISSUE: After starting Microsoft® Windows® 98 or Windows Me, the taskbar is missing and there are no icons. When starting Windows, the taskbar may flash on for a brief second and then disappear. The only display visible is the background wallpaper and the mouse cursor. Pressing CTRL+ALT+DELETE brings up the Close Program dialog box, but selecting End Task on the items on the list may not have an effect. When the computer is started into Safe mode, the issue still occurs. Running Scanreg /Restore does not resolve the issue. There have been several reports that the issue occurred when restarting the computer after receiving a dialog box that displays "Virus/spyware found. Do you wish to remove?" or "Do you want to install Spyware Monitor?" The dialog box only has Yes or No selections, and selecting either can cause the issue. There is no X to close the dialog box, however pressing CTRL+ALT+DELETE to bring up the Close Program dialog box lists a "Remove found spyware?" entry, which can be end tasked. (1) Press CTRL+ALT+DELETE, & click Shut Down. (2) After the computer has been shut down, turn on the computer. Hold CTRL as you boot for the Startup Menu, or begin pressing the F8 key in one-second intervals. If you complete this step successfully, the Microsoft Windows Startup Menu is displayed. If no menu is displayed and Windows starts up normally, repeat this step. (3) At the Microsoft Windows Startup Menu, use the ARROW keys to select "Command Prompt Only", and then press the ENTER key. (4) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (3) In the C:\Windows\SYSTEM.INI file, locate the line of text under the [boot] section that lists "Shell=Explorer.exe". This is typically the third line in the file. (4) Edit the "Shell=Explorer.exe" line by deleting the "Explorer.exe" text and replacing it with "Winfile.exe". The line should list the following: Shell=Winfile.exe (5) To save the changes, press the ALT+F keys. (6) A menu displays in the upper left corner of the screen. Press the X key to exit. (7) Press ENTER to save the changes and return to the command prompt. (TAB would move you to the next button.) (8) At the command prompt, restart the computer by pressing the CTRL+ALT+DELETE keys. Once Windows has restarted, it starts into the Windows File Manager (Winfile.exe). (9) In the File Manager window, double-click "progra~1" in the left hand window to open the Program Files folder. (10) Double-click "intern~1" in the left hand window to open the Internet Explorer folder. (11) Double-click "setup" in the left hand window to open the Setup folder. (12) In the File Manager window, double- click "Setup.exe" in the right hand window to launch Internet Explorer setup. NOTE: If the setup folder is not available, Internet Explorer has not been updated and a previous version of Internet Explorer cannot be restored. You cannot use this method. Close "Winfile", shut down, & post back, or try the URL at the very bottom of this post, which is an over-install of IE. (13) In the Internet Explorer 6 and Internet Tools Setup window, click OK. (14) In the Setup Message dialog box, click Yes to restore the previous version of Internet Explorer. (15) Internet Explorer setup removes components. (16) In the Internet Explorer 6 and Internet Tools - Restart Windows dialog box, click Restart Windows. When the computer is restarting, hold CTRL for the Startup Menu, or begin pressing the F8 key in one-second intervals. If you complete this step successfully, the Microsoft Windows Startup Menu is displayed. If no menu is displayed and Windows starts up normally, repeat this step. (17) At the Microsoft Windows Startup Menu, use the ARROW keys to select Command prompt only, and then press ENTER. (18) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (19) In the C:\Windows\SYSTEM.INI file, locate the line of text under the [boot] section that lists "Shell=Winfile.exe". This is typically the third line in the file. (20) Edit the "Shell=Winfile.exe" line by deleting the "Winfile.exe" text and replacing it with "Explorer.exe". The line should list the following: Shell=Explorer.exe (21) To save the changes, press the ALT+F keys. (22) A menu displays in the upper left corner of the screen. Press the X key to exit. (23) Press ENTER to save the changes and return to the command prompt. (TAB would move you to the next button.) (24) At the command prompt, restart the computer by pressing the CTRL+ALT+DELETE keys (25) Windows starts to a blue screen, but will still be accessing the hard drive for a period of time. When finished, Windows is on the desktop with icons, but an older version of Internet Explorer is installed. You should update your antivirus software, and then perform Windows Update to install a new version of Internet Explorer again. ....snip http://support.microsoft.com/default.aspx?scid=kb; [LN];249191 Blank Desktop or Illegal Operations Error Message After You Install Internet Explorer. This is a temporary reversion to an earlier IE, IF that option is present. http://support.microsoft.com/?kbid=293174 Over-Install IE in Progman. This is an over-install of IE. I have a detailed write-up for it, if you want. -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in message ... | No, I did not install Juno but I did try the method | suggested but cannot solve. | | Baxter. | -----Original Message----- | Here's one thing... | http://support.microsoft.com/default.aspx?scid=kb;en- | us;296211&Product=w98 | Invalid Page Fault in Module Explorer.exe | (296211) - After you upgrade your Juno software, or | download and install | Juno Web, you receive an error message similar to the | following: | Explorer.exe caused an invalid page fault in | explorer.exe at 0157F: | 00401F31 | | | -- | Thanks or Good Luck, | There may be humor in this post, and, | Naturally, you will not sue, | should things get worse after this, | PCR | | "baxter" wrote in | message | ... | | I have this error message "Explorer caused an invalid | | page fault in module explorer.exe at 0167:00401f31" | wehen | | start up. I have try a few method but no help. I have | | another PC that run Win 98, can I erase all files in | | c:/windows/system on my downed PC and copy all files | from | | the OK PC to the same location. | | | | Baxter. | | | . | . . |
#9
|
|||
|
|||
Wait... this is better...
(1) Hold CTRL as you boot for the Startup Menu. Select to boot to the "Command Prompt Only" (DOS). (2) At DOS... (a) Enter "EDIT C:\Windows\System.ini" (b) In the [Boot] section, change "Shell=3DExplorer.exe" to "Shell=3DProgman.exe" (c) Alt-F-X-ENTER (pressed separately) to exit Edit. (TAB to get to buttons. ENTER to accept a button.) (d) Ctrl-Alt-Del to Windows running Progman. (3) In Progman, over-install IE, which basically is E. ....snip of IE6Setup references... If you are IE5, "ie5setup.exe" will be in "C:\Windows Update Setup Files". (You may also use the copy in "C:\Program Files\Internet Explorer", which is "C:\Progra~1\Intern~1" to DOS. Well, if one fails, then try the other) (a) File menu, Run, Browse button. Folders pane will be open at "C:\Windows" with sub-folders below it. (b) D-Clk "C:\" in the Folders pane to go up one level. (c) Scroll down the Folders pane & D-Clk "window~1". (d) "ie5setup.exe" now appears in the left (File Name) pane. (e) D-CLK "IE5Setup.exe" to run it. (f) Bolt "Add a Component", & click "OK". (g) Select "Custom" & only check the items that have a bold checkbox, to avoid it will want the internet. Do not take the Multi-language Support, if you've done without it this long. The only one in bold there for me is Language Auto-Selection. Perhaps try for just that. (4) Reboot back to DOS. Then... (a) Enter "EDIT C:\Windows\System.ini" (b) In the [Boot] section, change back to "Shell=3DExplorer.exe" (c) Alt-F-X-ENTER to EXIT. (TAB to get to buttons. ENTER to accept a button.) (d) Ctrl-Alt-Del to Windows. OK, that's it. Hope you are back up. --=20 Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "PCR" wrote in message = ... ....snip | "baxter" wrote in message | ... | Ok! Heres is what happens. |=20 | When I boot I receive the following message: |=20 | "This program has performed an illegal operation and will | be shut down. |=20 | If the problem persists, contact the program vendor." |=20 | {Details} | EXPLORER caused an invaild page fault in module | EXPLORER.EXE at 0167:00401f31. |=20 | I select Close, the wallpaper is there but without | taskbar and desktop icon. |=20 | When I hit Ctrl-Alt-Del, the list of active | programs is empty. |=20 | Now, I will hit Ctrl-Alt-Del, and reload in Windows 98SE | in Normal mode and show the same error again. |=20 | I then try the recommendation on article no. 269211, | http://support.microsoft.com/default...b;en-us;296211 but = won't | help. |=20 | Later I try the step posted on 29 Sept but when reach | step 12 and click "setup.exe". A window title "setup" | with message "was not completed sucessfully". |=20 | I did not proceed to next step bcos the setup cannot be | completed but don't what problem. |=20 | Next try steps in article no. 249191, | http://support.microsoft.com/default.aspx?scid=3Dkb; | [LN];249191. Step 3 in this is the same as article | 269211, won't help. In step 6, a window appear, with | selection for "add a component" or "repair Internet | Explorer". This is not explain in article. But I select | repair option and another window with yes and no option | whether to repair IE. I choose yes, but a message show | IE6 could not be repaired. Please run setup again to | reinstall all components". Fail! How do I reinstall | components? |=20 | Next try steps in article no. 293174, | http://support.microsoft.com/?kbid=3D293174. Try method 1, | Add/remove programs windows is empty(blank) and don't | have MS IE5 and internet tools, cannot proceed to | add/remove and repair. Try method 2, same, empty screen. | Bottom of this article, "NOTE: If both methods fail, you | may have to completely reinstall the Windows 98 operating | system. It should be noted that the reinstallation of | Windows 98 may result in the loss of some Windows | configuration information and/or data." |=20 | I can follow until the editing of system.ini and safe it | and boot to Winfile but the results is not what as stated | in article or as suggested. |=20 | What next? |=20 | Same message and response in SAFE MODE!! |=20 | There is another posting on 3th Oct with the same error | message but mine don't so much other error. |=20 | Hope this explanation is better. |=20 | Baxter. |=20 |=20 |=20 | -----Original Message----- | (1) Well, where did it go wrong in the way I posted? | Did it get to Windows running Winfile? | Be specific. It would be best to get that one to | work. | | (2) Can you boot to Windows Normal Mode? | | (3) Can you boot to Safe Mode? | | | --=20 | Thanks or Good Luck, | There may be humor in this post, and, | Naturally, you will not sue, | should things get worse after this, | PCR | | "baxter" wrote in | message | ... | I have try the recommended way(article | 249191,293174,296211) but cannot solve. How can I install | Internet Explorer without using the way in the above | article? | | Baxter. | | -----Original Message----- | I had hopes for that one, because it had your number: | 00401F31. Well, | here is what I meant to originally post. Try this one, | especially if you | also cannot boot to Safe Mode (hold F5 or CTRL as you | boot to see)... | | Explorer & IE are basically one & the same. Therefore, | may as well try | this write-up, originally from a Gateway WEB site, which | is a temporary | reversion to an earlier version of IE... | | ONE THING: Do nothing more than stated here using | Winfile, because, if | you move a file with it, you will lose that file's LFN | (Long File Name) | in the destination. | | Desktop Icons and Taskbar Are Missing | | Affected Products: Software, System CDs | Affected Operating Systems: Windows=AE 98 , Windows=AE 98 | SE, | Windows=AE Me | | ISSUE: After starting Microsoft=AE Windows=AE 98 or Windows | Me, the taskbar is missing and there are no icons. When | starting Windows, the taskbar may flash on for a brief | second and then disappear. The only display visible is | the | background wallpaper and the mouse cursor. Pressing | CTRL+ALT+DELETE brings up the Close Program dialog box, | but selecting End Task on the items on the list may not | have an effect. When the computer is started into Safe | mode, the issue still occurs. Running Scanreg /Restore | does not resolve the issue. | | There have been several reports that the issue occurred | when restarting the computer after receiving a dialog | box | that displays "Virus/spyware found. Do you wish to | remove?" or "Do you want to install Spyware Monitor?" | The | dialog box only has Yes or No selections, and selecting | either can cause the issue. There is no X to close the | dialog box, however pressing CTRL+ALT+DELETE to bring up | the Close Program dialog box lists a "Remove found | spyware?" entry, which can be end tasked. | | (1) Press CTRL+ALT+DELETE, & click Shut Down. | | (2) After the computer has been shut down, turn on the | computer. Hold | CTRL as you boot for the Startup Menu, or begin pressing | the F8 key in | one-second intervals. If you complete this step | successfully, the | Microsoft Windows Startup Menu is displayed. If no menu | is displayed and | Windows starts up normally, repeat this step. | | (3) At the Microsoft Windows Startup Menu, use the ARROW | keys to select | "Command Prompt Only", and then press the ENTER key. | | (4) At the command prompt, type: | EDIT C:\Windows\System.ini | Press ENTER. | | (3) In the C:\Windows\SYSTEM.INI file, locate the line | of text under the | [boot] section that lists "Shell=3DExplorer.exe". This is | typically the | third line in the file. | | (4) Edit the "Shell=3DExplorer.exe" line by deleting | the "Explorer.exe" | text and replacing it with "Winfile.exe". The line | should list the | following: | Shell=3DWinfile.exe | | (5) To save the changes, press the ALT+F keys. | | (6) A menu displays in the upper left corner of the | screen. Press the X | key to exit. | | (7) Press ENTER to save the changes and return to the | command prompt. | (TAB would move you to the next button.) | | (8) At the command prompt, restart the computer by | pressing the | CTRL+ALT+DELETE keys. Once Windows has restarted, it | starts into the | Windows File Manager (Winfile.exe). | | (9) In the File Manager window, double-click "progra~1" | in the left hand | window to open the Program Files folder. | | (10) Double-click "intern~1" in the left hand window to | open the | Internet Explorer folder. | | (11) Double-click "setup" in the left hand window to | open the Setup | folder. | | (12) In the File Manager window, double- | click "Setup.exe" in the right | hand window to launch Internet Explorer setup. | | NOTE: If the setup folder is not available, Internet | Explorer has not | been updated and a previous version of Internet Explorer | cannot be | restored. You cannot use this method. Close "Winfile", | shut down, & post | back, or try the URL at the very bottom of this post, | which is an | over-install of IE. | | (13) In the Internet Explorer 6 and Internet Tools Setup | window, click | OK. | | (14) In the Setup Message dialog box, click Yes to | restore the previous | version of Internet Explorer. | | (15) Internet Explorer setup removes components. | | (16) In the Internet Explorer 6 and Internet Tools - | Restart Windows | dialog box, click Restart Windows. | | When the computer is restarting, hold CTRL for the | Startup Menu, or | begin pressing the F8 key in one-second intervals. If | you complete this | step successfully, the Microsoft Windows Startup Menu is | displayed. If | no menu is displayed and Windows starts up normally, | repeat this step. | | (17) At the Microsoft Windows Startup Menu, use the | ARROW keys to select | Command prompt only, and then press ENTER. | | (18) At the command prompt, type: | EDIT C:\Windows\System.ini | Press ENTER. | | (19) In the C:\Windows\SYSTEM.INI file, locate the line | of text under | the [boot] section that lists "Shell=3DWinfile.exe". This | is typically the | third line in the file. | | (20) Edit the "Shell=3DWinfile.exe" line by deleting | the "Winfile.exe" | text and replacing it with "Explorer.exe". The line | should list the | following: | Shell=3DExplorer.exe | | (21) To save the changes, press the ALT+F keys. | | (22) A menu displays in the upper left corner of the | screen. Press the X | key to exit. | | (23) Press ENTER to save the changes and return to the | command prompt. | (TAB would move you to the next button.) | | (24) At the command prompt, restart the computer by | pressing the | CTRL+ALT+DELETE keys | | (25) Windows starts to a blue screen, but will still be | accessing the hard drive for a period of time. When | finished, Windows is on the desktop with icons, but an | older version of Internet Explorer is installed. You | should update your antivirus software, and then perform | Windows Update to install a new version of Internet | Explorer again. | | ....snip | | http://support.microsoft.com/default.aspx?scid=3Dkb; | [LN];249191 | Blank Desktop or Illegal Operations Error Message After | You Install | Internet Explorer. This is a temporary reversion to an | earlier IE, IF | that option is present. | | http://support.microsoft.com/?kbid=3D293174 | Over-Install IE in Progman. This is an over-install of | IE. I have a | detailed write-up for it, if you want. | | | --=20 | Thanks or Good Luck, | There may be humor in this post, and, | Naturally, you will not sue, | should things get worse after this, | PCR | | "baxter" wrote in | message | ... | | No, I did not install Juno but I did try the method | | suggested but cannot solve. | | | | Baxter. | | -----Original Message----- | | Here's one thing... | | http://support.microsoft.com/default.aspx?scid=3Dkb;en- | | us;296211&Product=3Dw98 | | Invalid Page Fault in Module Explorer.exe | | (296211) - After you upgrade your Juno software, or | | download and install | | Juno Web, you receive an error message similar to the | | following: | | Explorer.exe caused an invalid page fault in | | explorer.exe at 0157F: | | 00401F31 | | | | | | --=20 | | Thanks or Good Luck, | | There may be humor in this post, and, | | Naturally, you will not sue, | | should things get worse after this, | | PCR | | | | "baxter" wrote | in | | message | | ... | | | I have this error message "Explorer caused an | invalid | | | page fault in module explorer.exe at 0167:00401f31" | | wehen | | | start up. I have try a few method but no help. I | have | | | another PC that run Win 98, can I erase all files | in | | | c:/windows/system on my downed PC and copy all | files | | from | | | the OK PC to the same location. | | | | | | Baxter. | | | | | | . | | | | | . | | | | . | |=20 | |
#10
|
|||
|
|||
Mine is IE6. Does the step still apply?
Baxter. -----Original Message----- Yes, this explanation is better. You cannot boot to=20 Normal or Safe Mode, & Explorer complains over itself. Therefore, this is the=20 right fix for you. BUT, what is going wrong? (We don't want to=20 reinstall all of Windows. We JUST want to over-install IE.) Do you know=20 what version of IE you are? My guess from Properties, Details button, of=20 R-Clk your post... X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300 ....is that you are IE5.5. THAT one should be=20 repairable. (But it isn't working.) Let me look carefully at what you are doing... So, Step (12) of the procedure did not work. That means=20 you didn't opt to retain the ability to revert to an earlier IE when=20 you installed IE5.5. So, next would be to over-install IE5.5. Let's=20 see... You went to the wrong one (Q249191), which basically does the same=20 as the steps I posted-- a reversion. But later you made it to the Over-Install of IE=20 (Q293174). Here, this is my write-up for that. (I have removed references to IE6=20 to simplify)... (1) Hold CTRL as you boot for the Startup Menu. Select to boot to the "Command Prompt Only" (DOS). (2) At DOS... (a) Enter "EDIT C:\Windows\System.ini" (b) In the [Boot] section, change "Shell=3DExplorer.exe" to "Shell=3DProgman.exe" (c) Alt-F-X-ENTER (pressed separately) to exit Edit.=20 (TAB to get to buttons. ENTER to accept a button.) (d) Ctrl-Alt-Del to Windows running Progman. (3) In Progman, over-install IE, which basically is E. If it asks for an internet connection, let it connect,=20 if it can. Anyway, select "Custom" & only check the items that have=20 a bold checkbox, to avoid it will want the internet. Do not=20 take the Multi-language Support, if you've done without it this=20 long. The only one in bold there for me is Language Auto-Selection.=20 Perhaps try for just that. ....snip of IE6Setup references... If you are IE5, "ie5setup.exe" will be in "C:\Windows=20 Update Setup Files". (You may also use the copy in "C:\Program=20 Files\Internet Explorer", which is "C:\Progra~1\Intern~1" to DOS. Well,=20 if one fails, then try the other) (a) File menu, Run, Browse button. Folders pane will be open at "C:\Windows" with sub- folders below it. (b) D-Clk "C:\" in the Folders pane to go up one level. (c) Scroll down the Folders pane & D-Clk "window~1". (d) "ie5setup.exe" now appears in the left (File Name)=20 pane. (e) D-CLK "IE5Setup.exe" to run it. (4) Reboot back to DOS. Then... (a) Enter "EDIT C:\Windows\System.ini" (b) In the [Boot] section, change back=20 to "Shell=3DExplorer.exe" (c) Alt-F-X-ENTER to EXIT. (TAB to get to buttons. ENTER=20 to accept a button.) (d) Ctrl-Alt-Del to Windows. OK, that's it. Hope you are back up. --=20 Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in=20 message ... Ok! Heres is what happens. When I boot I receive the following message: "This program has performed an illegal operation and will be shut down. If the problem persists, contact the program vendor." {Details} EXPLORER caused an invaild page fault in module EXPLORER.EXE at 0167:00401f31. I select Close, the wallpaper is there but without taskbar and desktop icon. When I hit Ctrl-Alt-Del, the list of active programs is empty. Now, I will hit Ctrl-Alt-Del, and reload in Windows 98SE in Normal mode and show the same error again. I then try the recommendation on article no. 269211, http://support.microsoft.com/default.aspx?scid=3Dkb;en- us;296211 but won't help. Later I try the step posted on 29 Sept but when reach step 12 and click "setup.exe". A window title "setup" with message "was not completed sucessfully". I did not proceed to next step bcos the setup cannot be completed but don't what problem. Next try steps in article no. 249191, http://support.microsoft.com/default.aspx?scid=3Dkb; [LN];249191. Step 3 in this is the same as article 269211, won't help. In step 6, a window appear, with selection for "add a component" or "repair Internet Explorer". This is not explain in article. But I select repair option and another window with yes and no option whether to repair IE. I choose yes, but a message show IE6 could not be repaired. Please run setup again to reinstall all components". Fail! How do I reinstall components? Next try steps in article no. 293174, http://support.microsoft.com/?kbid=3D293174. Try method 1, Add/remove programs windows is empty(blank) and don't have MS IE5 and internet tools, cannot proceed to add/remove and repair. Try method 2, same, empty screen. Bottom of this article, "NOTE: If both methods fail, you may have to completely reinstall the Windows 98 operating system. It should be noted that the reinstallation of Windows 98 may result in the loss of some Windows configuration information and/or data." I can follow until the editing of system.ini and safe it and boot to Winfile but the results is not what as stated in article or as suggested. What next? Same message and response in SAFE MODE!! There is another posting on 3th Oct with the same error message but mine don't so much other error. Hope this explanation is better. Baxter. -----Original Message----- (1) Well, where did it go wrong in the way I posted? Did it get to Windows running Winfile? Be specific. It would be best to get that one to work. (2) Can you boot to Windows Normal Mode? (3) Can you boot to Safe Mode? --=20 Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in message ... I have try the recommended way(article 249191,293174,296211) but cannot solve. How can I=20 install Internet Explorer without using the way in the above article? Baxter. -----Original Message----- I had hopes for that one, because it had your number: 00401F31. Well, here is what I meant to originally post. Try this one, especially if you also cannot boot to Safe Mode (hold F5 or CTRL as you boot to see)... Explorer & IE are basically one & the same. Therefore, may as well try this write-up, originally from a Gateway WEB site,=20 which is a temporary reversion to an earlier version of IE... ONE THING: Do nothing more than stated here using Winfile, because, if you move a file with it, you will lose that file's LFN (Long File Name) in the destination. Desktop Icons and Taskbar Are Missing Affected Products: Software, System CDs Affected Operating Systems: Windows=AE 98 , Windows=AE 98 SE, Windows=AE Me ISSUE: After starting Microsoft=AE Windows=AE 98 or Windows Me, the taskbar is missing and there are no icons. When starting Windows, the taskbar may flash on for a brief second and then disappear. The only display visible is the background wallpaper and the mouse cursor. Pressing CTRL+ALT+DELETE brings up the Close Program dialog box, but selecting End Task on the items on the list may not have an effect. When the computer is started into Safe mode, the issue still occurs. Running Scanreg /Restore does not resolve the issue. There have been several reports that the issue occurred when restarting the computer after receiving a dialog box that displays "Virus/spyware found. Do you wish to remove?" or "Do you want to install Spyware Monitor?" The dialog box only has Yes or No selections, and selecting either can cause the issue. There is no X to close the dialog box, however pressing CTRL+ALT+DELETE to bring=20 up the Close Program dialog box lists a "Remove found spyware?" entry, which can be end tasked. (1) Press CTRL+ALT+DELETE, & click Shut Down. (2) After the computer has been shut down, turn on the computer. Hold CTRL as you boot for the Startup Menu, or begin=20 pressing the F8 key in one-second intervals. If you complete this step successfully, the Microsoft Windows Startup Menu is displayed. If no menu is displayed and Windows starts up normally, repeat this step. (3) At the Microsoft Windows Startup Menu, use the=20 ARROW keys to select "Command Prompt Only", and then press the ENTER key. (4) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (3) In the C:\Windows\SYSTEM.INI file, locate the line of text under the [boot] section that lists "Shell=3DExplorer.exe". This is typically the third line in the file. (4) Edit the "Shell=3DExplorer.exe" line by deleting the "Explorer.exe" text and replacing it with "Winfile.exe". The line should list the following: Shell=3DWinfile.exe (5) To save the changes, press the ALT+F keys. (6) A menu displays in the upper left corner of the screen. Press the X key to exit. (7) Press ENTER to save the changes and return to the command prompt. (TAB would move you to the next button.) (8) At the command prompt, restart the computer by pressing the CTRL+ALT+DELETE keys. Once Windows has restarted, it starts into the Windows File Manager (Winfile.exe). (9) In the File Manager window, double-click "progra~1" in the left hand window to open the Program Files folder. (10) Double-click "intern~1" in the left hand window to open the Internet Explorer folder. (11) Double-click "setup" in the left hand window to open the Setup folder. (12) In the File Manager window, double- click "Setup.exe" in the right hand window to launch Internet Explorer setup. NOTE: If the setup folder is not available, Internet Explorer has not been updated and a previous version of Internet=20 Explorer cannot be restored. You cannot use this method. Close "Winfile", shut down, & post back, or try the URL at the very bottom of this post, which is an over-install of IE. (13) In the Internet Explorer 6 and Internet Tools=20 Setup window, click OK. (14) In the Setup Message dialog box, click Yes to restore the previous version of Internet Explorer. (15) Internet Explorer setup removes components. (16) In the Internet Explorer 6 and Internet Tools - Restart Windows dialog box, click Restart Windows. When the computer is restarting, hold CTRL for the Startup Menu, or begin pressing the F8 key in one-second intervals. If you complete this step successfully, the Microsoft Windows Startup Menu=20 is displayed. If no menu is displayed and Windows starts up normally, repeat this step. (17) At the Microsoft Windows Startup Menu, use the ARROW keys to select Command prompt only, and then press ENTER. (18) At the command prompt, type: EDIT C:\Windows\System.ini Press ENTER. (19) In the C:\Windows\SYSTEM.INI file, locate the line of text under the [boot] section that lists "Shell=3DWinfile.exe". This is typically the third line in the file. (20) Edit the "Shell=3DWinfile.exe" line by deleting the "Winfile.exe" text and replacing it with "Explorer.exe". The line should list the following: Shell=3DExplorer.exe (21) To save the changes, press the ALT+F keys. (22) A menu displays in the upper left corner of the screen. Press the X key to exit. (23) Press ENTER to save the changes and return to the command prompt. (TAB would move you to the next button.) (24) At the command prompt, restart the computer by pressing the CTRL+ALT+DELETE keys (25) Windows starts to a blue screen, but will still be accessing the hard drive for a period of time. When finished, Windows is on the desktop with icons, but an older version of Internet Explorer is installed. You should update your antivirus software, and then perform Windows Update to install a new version of Internet Explorer again. ....snip http://support.microsoft.com/default.aspx?scid=3Dkb; [LN];249191 Blank Desktop or Illegal Operations Error Message After You Install Internet Explorer. This is a temporary reversion to an earlier IE, IF that option is present. http://support.microsoft.com/?kbid=3D293174 Over-Install IE in Progman. This is an over-install of IE. I have a detailed write-up for it, if you want. --=20 Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, should things get worse after this, PCR "baxter" wrote in message .. . | No, I did not install Juno but I did try the method | suggested but cannot solve. | | Baxter. | -----Original Message----- | Here's one thing... | http://support.microsoft.com/default.aspx? scid=3Dkb;en- | us;296211&Product=3Dw98 | Invalid Page Fault in Module Explorer.exe | (296211) - After you upgrade your Juno software, or | download and install | Juno Web, you receive an error message similar to=20 the | following: | Explorer.exe caused an invalid page fault in | explorer.exe at 0157F: | 00401F31 | | | --=20 | Thanks or Good Luck, | There may be humor in this post, and, | Naturally, you will not sue, | should things get worse after this, | PCR | | "baxter" wrote in | message | ... | | I have this error message "Explorer caused an invalid | | page fault in module explorer.exe at=20 0167:00401f31" | wehen | | start up. I have try a few method but no help. I have | | another PC that run Win 98, can I erase all files in | | c:/windows/system on my downed PC and copy all files | from | | the OK PC to the same location. | | | | Baxter. | | | . | . . . |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help! Windows98 & Explorer gone mad in safe mode. | Sybil Fox | General | 45 | September 26th 04 09:01 PM |
Invalid page fault MSPAINT.EXE | Ramon A | General | 17 | July 19th 04 10:22 PM |
unknown? | genX | Software & Applications | 4 | July 11th 04 01:36 PM |
Invalid Page Fault in explorer.exe and MSIMN | Kitmose | Software & Applications | 0 | May 29th 04 08:15 PM |
Please: Internet connection severed by "invalid page fault in module MSJAVA. DL | martha | Improving Performance | 3 | May 24th 04 02:34 AM |