New install: ME boots to desktop and then blue screen: windows protection error

Thursday Morn

ME was working on this computer.

F-disked the drive and installed XP. No installation errors.

Would not boot.

Thought the board may be too old.
(Shuttle Spacewalker HOT-591p, via chipset, newest bios)

So, I then format the disk and install ME. No installation errors.

( Only video card, ram, floppy, harddrive. )
( All on board peripherals are disabled: Com, parr, usb. )
( ACPI is enabled. )

I changed the video card. The card was found, the drivers installed, the
monitor was found.

Reboot: it gets to the desktop and poops:
Blue screen
System halted.
Windows protection error

It does this in safe mode and in normal mode.

Thoughts?

J

"J" wrote in message
...
Thursday Morn

ME was working on this computer.

F-disked the drive and installed XP. No installation errors.

Would not boot.

Thought the board may be too old.
(Shuttle Spacewalker HOT-591p, via chipset, newest bios)

So, I then format the disk and install ME. No installation errors.

( Only video card, ram, floppy, harddrive. )
( All on board peripherals are disabled: Com, parr, usb. )
( ACPI is enabled. )

I changed the video card. The card was found, the drivers installed, the
monitor was found.

Reboot: it gets to the desktop and poops:
Blue screen
System halted.
Windows protection error

It does this in safe mode and in normal mode.

Thoughts?


Wrong video drivers.

Which video card did you use for the XP installation? Did ME boot OK before
you changed the card?


Shane

Thank you for your response.

Wrong video drivers.

Which video card did you use for the XP installation? Did ME boot OK
before
you changed the card?

'Tis a GeForce2 MX400 64m AGP card.

The video drivers were auto loaded by the XP install and the ME install.

Neither would boot.

I changed the card to an old pci card. ME found the card, loaded drivers,
found the monitor and then wanted to reboot.

And it does not boot to normal, and does not boot to safe mode.

Just like with the other video card.

J

"Shane" wrote in message
...
"J" wrote in message
...
Thursday Morn

ME was working on this computer.

F-disked the drive and installed XP. No installation errors.

Would not boot.

Thought the board may be too old.
(Shuttle Spacewalker HOT-591p, via chipset, newest bios)

So, I then format the disk and install ME. No installation errors.

( Only video card, ram, floppy, harddrive. )
( All on board peripherals are disabled: Com, parr, usb. )
( ACPI is enabled. )

I changed the video card. The card was found, the drivers installed, the
monitor was found.

Reboot: it gets to the desktop and poops:
Blue screen
System halted.
Windows protection error

It does this in safe mode and in normal mode.

Thoughts?


Wrong video drivers.

Which video card did you use for the XP installation? Did ME boot OK
before
you changed the card?


Shane

See what you think of this:
http://support.microsoft.com/default...NoWebContent=1

Or

http://tinyurl.com/c8n8

Plenty to mull on.

Good luck.


Shane



"J" wrote in message
...
Thank you for your response.

Wrong video drivers.

Which video card did you use for the XP installation? Did ME boot OK
before
you changed the card?

'Tis a GeForce2 MX400 64m AGP card.

The video drivers were auto loaded by the XP install and the ME install.

Neither would boot.

I changed the card to an old pci card. ME found the card, loaded drivers,
found the monitor and then wanted to reboot.

And it does not boot to normal, and does not boot to safe mode.

Just like with the other video card.

J

"Shane" wrote in message
...
"J" wrote in message
...
Thursday Morn

ME was working on this computer.

F-disked the drive and installed XP. No installation errors.

Would not boot.

Thought the board may be too old.
(Shuttle Spacewalker HOT-591p, via chipset, newest bios)

So, I then format the disk and install ME. No installation errors.

( Only video card, ram, floppy, harddrive. )
( All on board peripherals are disabled: Com, parr, usb. )
( ACPI is enabled. )

I changed the video card. The card was found, the drivers installed,
the
monitor was found.

Reboot: it gets to the desktop and poops:
Blue screen
System halted.
Windows protection error

It does this in safe mode and in normal mode.

Thoughts?


Wrong video drivers.

Which video card did you use for the XP installation? Did ME boot OK
before
you changed the card?


Shane

Thank you for your time.

"Shane" wrote in message
...
See what you think of this:

http://support.microsoft.com/default...NoWebContent=1

Or

http://tinyurl.com/c8n8

Plenty to mull on.

Good luck.


Shane



"J" wrote in message
...
Thank you for your response.

Wrong video drivers.

Which video card did you use for the XP installation? Did ME boot OK
before
you changed the card?

'Tis a GeForce2 MX400 64m AGP card.

The video drivers were auto loaded by the XP install and the ME install.

Neither would boot.

I changed the card to an old pci card. ME found the card, loaded
drivers,
found the monitor and then wanted to reboot.

And it does not boot to normal, and does not boot to safe mode.

Just like with the other video card.

J

"Shane" wrote in message
...
"J" wrote in message
...
Thursday Morn

ME was working on this computer.

F-disked the drive and installed XP. No installation errors.

Would not boot.

Thought the board may be too old.
(Shuttle Spacewalker HOT-591p, via chipset, newest bios)

So, I then format the disk and install ME. No installation errors.

( Only video card, ram, floppy, harddrive. )
( All on board peripherals are disabled: Com, parr, usb. )
( ACPI is enabled. )

I changed the video card. The card was found, the drivers installed,
the
monitor was found.

Reboot: it gets to the desktop and poops:
Blue screen
System halted.
Windows protection error

It does this in safe mode and in normal mode.

Thoughts?


Wrong video drivers.

Which video card did you use for the XP installation? Did ME boot OK
before
you changed the card?


Shane

You're welcome. Hope you sort it out.

Shane

"J" wrote in message
...
Thank you for your time.

"Shane" wrote in message
...
See what you think of this:


http://support.microsoft.com/default...NoWebContent=1

Or

http://tinyurl.com/c8n8

Plenty to mull on.

Good luck.


Shane



"J" wrote in message
...
Thank you for your response.

Wrong video drivers.

Which video card did you use for the XP installation? Did ME boot OK
before
you changed the card?

'Tis a GeForce2 MX400 64m AGP card.

The video drivers were auto loaded by the XP install and the ME
install.

Neither would boot.

I changed the card to an old pci card. ME found the card, loaded
drivers,
found the monitor and then wanted to reboot.

And it does not boot to normal, and does not boot to safe mode.

Just like with the other video card.

J

"Shane" wrote in message
...
"J" wrote in message
...
Thursday Morn

ME was working on this computer.

F-disked the drive and installed XP. No installation errors.

Would not boot.

Thought the board may be too old.
(Shuttle Spacewalker HOT-591p, via chipset, newest bios)

So, I then format the disk and install ME. No installation errors.

( Only video card, ram, floppy, harddrive. )
( All on board peripherals are disabled: Com, parr, usb. )
( ACPI is enabled. )

I changed the video card. The card was found, the drivers
installed,
the
monitor was found.

Reboot: it gets to the desktop and poops:
Blue screen
System halted.
Windows protection error

It does this in safe mode and in normal mode.

Thoughts?


Wrong video drivers.

Which video card did you use for the XP installation? Did ME boot OK
before
you changed the card?


Shane