Help reinstalling Win98, please

PROBLEM #1 Though laptop's Win98se would boot up successfully,
it would first display a couple of messages regarding corrupted files.

SO --- used startup floppy to fdisk and format.

BIG PROBLEM #2 But now can't reinstall W98. On each bootup,
after choosing "Start computer with CRROM support" ... these are
received: "diagnostic tool successfully loaded to drive D."

"Device driver not found MSC001"

"No valid CDROM device drivers selected"

And, of course, when the optical drive is swapped in to replace
the floppy drive it is not recognized.

NOTE: Computer is a Dell CP233...the floppy drive being used
(also the swappable CD drive) were tested on another Dell laptop
and they work fine. How can I get the device driver loaded so
that W98 can be reinstalled?

Go to http://www.bootdisk.com/bootdisk.htm and create a Windows
95b boot floppy. This uses DOS 7.0, which is sufficient for Windows=20
98 setup. Start the laptop with the boot floppy, type=20
"copy /y a:\*.* c:\", then "sys c:". Shut down, remove the floppy
drive, install the CD drive and restart. Please note that the CD drive
will probably be assigned drive letter "R:".

Ben

"Etaoin" wrote in message =
...
PROBLEM #1 Though laptop's Win98se would boot up successfully,
it would first display a couple of messages regarding corrupted =
files.
=20
SO --- used startup floppy to fdisk and format.
=20
BIG PROBLEM #2 But now can't reinstall W98. On each bootup,
after choosing "Start computer with CRROM support" ... these are
received: "diagnostic tool successfully loaded to drive D."
=20
"Device driver not found MSC001"
=20
"No valid CDROM device drivers selected"
=20
And, of course, when the optical drive is swapped in to replace
the floppy drive it is not recognized.
=20
NOTE: Computer is a Dell CP233...the floppy drive being used
(also the swappable CD drive) were tested on another Dell laptop
and they work fine. How can I get the device driver loaded so
that W98 can be reinstalled?
=20
=20

Your Dell W98 CD should be self booting so you can go into setup (the BIOS)
by pressing the key indicated on the startup screen, finding the boot
section and making sure the CDRom is the first boot device. Reboot with the
CD in the drive.

--
Regards

Ron Badour, MS MVP for W98
Tips: http://home.satx.rr.com/badour
Knowledge Base Info:
http://support.microsoft.com/default.aspx?pr=kbinfo

"Etaoin" wrote in message
...
PROBLEM #1 Though laptop's Win98se would boot up successfully,
it would first display a couple of messages regarding corrupted files.

SO --- used startup floppy to fdisk and format.

BIG PROBLEM #2 But now can't reinstall W98. On each bootup,
after choosing "Start computer with CRROM support" ... these are
received: "diagnostic tool successfully loaded to drive D."

"Device driver not found MSC001"

"No valid CDROM device drivers selected"

And, of course, when the optical drive is swapped in to replace
the floppy drive it is not recognized.

NOTE: Computer is a Dell CP233...the floppy drive being used
(also the swappable CD drive) were tested on another Dell laptop
and they work fine. How can I get the device driver loaded so
that W98 can be reinstalled?