If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#31
|
|||
|
|||
Have you been able to get the "safely remove hardware" icon to
appear, I have the same problems with Windows ME. |
#32
|
|||
|
|||
I do have the same problem. I use 2 usb devices (an external CDRW and a flash
drive). System recognizes both devices and everything works fine. The problem is that I cannot safely remove them. (I have to shutdown before unpluging). The only problem is the missing taskbar icon. Everything else seems to be OK. Any ideas? |
#33
|
|||
|
|||
USB notification missing
I do have the same problem. I use 2 usb devices (an external CDRW and a flash
drive). System recognizes both devices and everything works fine. The problem is that I cannot safely remove them. (I have to shutdown before unpluging). The only problem is the missing taskbar icon. Everything else seems to be OK. Any ideas? |
#34
|
|||
|
|||
What same problem?
I have never had a taskbar icon with Win98 SE for any USB drives and have no problem if I wait a few seconds after closing any of their windows down before removing the drive. What happens with you? ....Alan -- Alan Edwards, MS MVP W95/98 Systems http://dts-l.org/index.html In microsoft.public.win98.performance, Geo wrote: I do have the same problem. I use 2 usb devices (an external CDRW and a flash drive). System recognizes both devices and everything works fine. The problem is that I cannot safely remove them. (I have to shutdown before unpluging). The only problem is the missing taskbar icon. Everything else seems to be OK. Any ideas? |
#35
|
|||
|
|||
USB notification missing
What same problem?
I have never had a taskbar icon with Win98 SE for any USB drives and have no problem if I wait a few seconds after closing any of their windows down before removing the drive. What happens with you? ....Alan -- Alan Edwards, MS MVP W95/98 Systems http://dts-l.org/index.html In microsoft.public.win98.performance, Geo wrote: I do have the same problem. I use 2 usb devices (an external CDRW and a flash drive). System recognizes both devices and everything works fine. The problem is that I cannot safely remove them. (I have to shutdown before unpluging). The only problem is the missing taskbar icon. Everything else seems to be OK. Any ideas? |
#36
|
|||
|
|||
The problem is excactly what I tried to describe. For some reason, one day I
connected my USB device and the safely remove hardware icon did nor appeared in the taskbar. When I had to disconnect the usb device (an Iomega flash drive) I had no other option but to simply plug it off (without safely removing it as I used to do). When I do that, pc freezes and I have to restart. (Note : Rightclicking on the drive icon in My Computer and clicking on Eject option does not help.) "Alan Edwards" wrote: What same problem? I have never had a taskbar icon with Win98 SE for any USB drives and have no problem if I wait a few seconds after closing any of their windows down before removing the drive. What happens with you? ....Alan -- Alan Edwards, MS MVP W95/98 Systems http://dts-l.org/index.html In microsoft.public.win98.performance, Geo wrote: I do have the same problem. I use 2 usb devices (an external CDRW and a flash drive). System recognizes both devices and everything works fine. The problem is that I cannot safely remove them. (I have to shutdown before unpluging). The only problem is the missing taskbar icon. Everything else seems to be OK. Any ideas? |
#37
|
|||
|
|||
USB notification missing
The problem is excactly what I tried to describe. For some reason, one day I
connected my USB device and the safely remove hardware icon did nor appeared in the taskbar. When I had to disconnect the usb device (an Iomega flash drive) I had no other option but to simply plug it off (without safely removing it as I used to do). When I do that, pc freezes and I have to restart. (Note : Rightclicking on the drive icon in My Computer and clicking on Eject option does not help.) "Alan Edwards" wrote: What same problem? I have never had a taskbar icon with Win98 SE for any USB drives and have no problem if I wait a few seconds after closing any of their windows down before removing the drive. What happens with you? ....Alan -- Alan Edwards, MS MVP W95/98 Systems http://dts-l.org/index.html In microsoft.public.win98.performance, Geo wrote: I do have the same problem. I use 2 usb devices (an external CDRW and a flash drive). System recognizes both devices and everything works fine. The problem is that I cannot safely remove them. (I have to shutdown before unpluging). The only problem is the missing taskbar icon. Everything else seems to be OK. Any ideas? |
#38
|
|||
|
|||
The Eject option sounds like it should work, but it simply sends an eject
command to the device. Some devices can eject their media, some can't. It is not associated with disconnecting the device from Windows. I would love to see the disconnect option on the right-click menu (and I guess that would also be a way around your problem). -- Jeff Richards MS MVP (Windows - Shell/User) "Geo" wrote in message ... snip (Note : Rightclicking on the drive icon in My Computer and clicking on Eject option does not help.) |
#39
|
|||
|
|||
USB notification missing
The Eject option sounds like it should work, but it simply sends an eject
command to the device. Some devices can eject their media, some can't. It is not associated with disconnecting the device from Windows. I would love to see the disconnect option on the right-click menu (and I guess that would also be a way around your problem). -- Jeff Richards MS MVP (Windows - Shell/User) "Geo" wrote in message ... snip (Note : Rightclicking on the drive icon in My Computer and clicking on Eject option does not help.) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to determine a Missing ActiveX control | Bill | General | 8 | January 2nd 05 09:34 PM |
'missing operating system' | HarryHamster | Setup & Installation | 3 | October 24th 04 12:44 PM |
ZoneAlarm missing Firewall Zones tab for subnet. New NAT router won't show Entire Network. | Networking | 5 | July 5th 04 09:48 AM | |
ZoneAlarm missing Firewall Zones tab for subnet. New NAT router won't show Entire Network. | Networking | 5 | July 5th 04 09:48 AM | |
missing dll files | peterb | General | 1 | May 21st 04 11:12 AM |