If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
PCR -here
He is DRV_2 (E:\) His Compact Disc is Drive F
[boot loader] timeout = 30 default = multi(0)disk(0)rdisk(0)partition(0)\WINNT multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000 Professional" /fastdetect C:\ = "Microsoft Windows" the BOOT.INI have to go in to C:\ to work With ntdr NTDETECT.COM |
#2
|
|||
|
|||
PCR -here
Hot-Text wrote:
He is DRV_2 (E:\) His Compact Disc is Drive F [boot loader] timeout = 30 default = multi(0)disk(0)rdisk(0)partition(0)\WINNT I think you left out... [operating systems] multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000 I think you meant... multi(0)disk(0)rdisk(1)partition(0)\WINNT = "Microsoft Windows 2000" Professional" /fastdetect C:\ = "Microsoft Windows" the BOOT.INI have to go in to C:\ to work That's true, I think. But I'm no expert in this. So, you've got two drives. Both have W2K. one is letter C: for sure, & the other you say is E:. The choices this Boot.ini offers are... "Microsoft Windows" "Microsoft Windows 2000" OK, then. With ntdr NTDETECT.COM -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, Should things get worse after this, PCR |
#3
|
|||
|
|||
PCR -here
Mr. PCR
For legg have Drv 1 Vol _1 & 2 Drv 2 C is 98 or 0,0,0,1 if you add a partition D is know Body or 0,0,0,2 if you add a Head Drive E is 2000 or 0,1,0,0 F is 1 CD/DVD -Rom or 1,0,0,0 if you add a CD/DVD -Rom G is 2 DVD -Rom or 2,0,0,0 if you Can add a partitions in CD/DVD And it would be 2 DVD -Rom on partition or 2,0,0,2 You can not make 2000 work on D when know Body have it First! You can Rename the Drives letter it's just a title .. When COS set the Drives it give it no Titles, but give Orders out as info::0, have 2, 0, have 2, 1 have 0, DOS did the Mathematic at setup or install! (Default) 1 multi is (0) or (IDE) 1 disk or drv is (0) X 1 partition or vol is (0) (Note: (C:) (D:\) all the way to (Z:\) or Titles of or Start names in Software mapping! IDE DRV # VOL # multi 1 disk 1 partition 1 (0,0,0,1) C multi 1 disk 1 partition 2 (0.0,0,2) D multi 1 disk 2 partition 0 (0,1,0,0) E multi 2 disk 1 partition 0 (1,0,0,0) DVD or CD = F If he put a Windows 2000 disk that was install on C:\ it map to (0,0,0,1) or D:\ it map to (0.0,0,2) he Broking up the wrong tree! For he is trying to run on (0,1,0,0) E and 2000 is not Map to work there! If 2000 install on D:/ he have to Delete D:\ from Win 98 Disk So 2000 can run on D:(0,1,0,0) D "Hot-Text" wrote in message ... He is DRV_2 (E:\) His Compact Disc is Drive F [boot loader] timeout = 30 default = multi(0)disk(0)rdisk(0)partition(0)\WINNT multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000 Professional" /fastdetect C:\ = "Microsoft Windows" the BOOT.INI have to go in to C:\ to work With ntdr NTDETECT.COM |
#4
|
|||
|
|||
PCR -here
ok you right I **** you!
I'll do to make a Win 98 Disk and a win 2000 Disk Drive PC today and give it right! LOOL |
#5
|
|||
|
|||
PCR -here
On Mon, 15 Nov 2010 00:43:00 -0600, "Hot-Text"
wrote: Mr. PCR For legg have Drv 1 Vol _1 & 2 Drv 2 C is 98 or 0,0,0,1 if you add a partition D is know Body or 0,0,0,2 if you add a Head Drive E is 2000 or 0,1,0,0 F is 1 CD/DVD -Rom or 1,0,0,0 if you add a CD/DVD -Rom G is 2 DVD -Rom or 2,0,0,0 if you Can add a partitions in CD/DVD And it would be 2 DVD -Rom on partition or 2,0,0,2 You can not make 2000 work on D when know Body have it First! You can Rename the Drives letter it's just a title .. When COS set the Drives it give it no Titles, but give Orders out as info::0, have 2, 0, have 2, 1 have 0, DOS did the Mathematic at setup or install! (Default) 1 multi is (0) or (IDE) 1 disk or drv is (0) X 1 partition or vol is (0) (Note: (C:) (D:\) all the way to (Z:\) or Titles of or Start names in Software mapping! IDE DRV # VOL # multi 1 disk 1 partition 1 (0,0,0,1) C multi 1 disk 1 partition 2 (0.0,0,2) D multi 1 disk 2 partition 0 (0,1,0,0) E multi 2 disk 1 partition 0 (1,0,0,0) DVD or CD = F If he put a Windows 2000 disk that was install on C:\ it map to (0,0,0,1) or D:\ it map to (0.0,0,2) he Broking up the wrong tree! For he is trying to run on (0,1,0,0) E and 2000 is not Map to work there! If 2000 install on D:/ he have to Delete D:\ from Win 98 Disk So 2000 can run on D:(0,1,0,0) D "Hot-Text" wrote in message ... He is DRV_2 (E:\) His Compact Disc is Drive F [boot loader] timeout = 30 default = multi(0)disk(0)rdisk(0)partition(0)\WINNT multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000 Professional" /fastdetect C:\ = "Microsoft Windows" the BOOT.INI have to go in to C:\ to work With ntdr NTDETECT.COM Do you actually use any of the installations that you're talking about? RL |
#6
|
|||
|
|||
PCR -here
YES
But I need to Test it a out a gin! to see if I remembered it right! so I'll do a Window 98 install today on: Disk ! Vol 1 & 2 Win 98 be in Vol I do Sec. Disk with a one Vol on the same Computer. Just to Check it out, For it been two years a go when I do two Disk! And I will Post it Boot.ini Here! Activating the MSHTML Editor! http://hot-text.ath.cx/new.html |
#7
|
|||
|
|||
PCR -here
On 11/15/2010 9:41 AM, legg wrote:
On Mon, 15 Nov 2010 00:43:00 -0600, "Hot-Text" wrote: Mr. PCR For legg have Drv 1 Vol _1& 2 Drv 2 C is 98 or 0,0,0,1 if you add a partition D is know Body or 0,0,0,2 if you add a Head Drive E is 2000 or 0,1,0,0 F is 1 CD/DVD -Rom or 1,0,0,0 if you add a CD/DVD -Rom G is 2 DVD -Rom or 2,0,0,0 if you Can add a partitions in CD/DVD And it would be 2 DVD -Rom on partition or 2,0,0,2 You can not make 2000 work on D when know Body have it First! You can Rename the Drives letter it's just a title .. When COS set the Drives it give it no Titles, but give Orders out as info::0, have 2, 0, have 2, 1 have 0, DOS did the Mathematic at setup or install! (Default) 1 multi is (0) or (IDE) 1 disk or drv is (0) X 1 partition or vol is (0) (Note: (C:) (D:\) all the way to (Z:\) or Titles of or Start names in Software mapping! IDE DRV # VOL # multi 1 disk 1 partition 1 (0,0,0,1) C multi 1 disk 1 partition 2 (0.0,0,2) D multi 1 disk 2 partition 0 (0,1,0,0) E multi 2 disk 1 partition 0 (1,0,0,0) DVD or CD = F If he put a Windows 2000 disk that was install on C:\ it map to (0,0,0,1) or D:\ it map to (0.0,0,2) he Broking up the wrong tree! For he is trying to run on (0,1,0,0) E and 2000 is not Map to work there! If 2000 install on D:/ he have to Delete D:\ from Win 98 Disk So 2000 can run on D:(0,1,0,0) D wrote in message ... He is DRV_2 (E:\) His Compact Disc is Drive F [boot loader] timeout = 30 default = multi(0)disk(0)rdisk(0)partition(0)\WINNT multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000 Professional" /fastdetect C:\ = "Microsoft Windows" the BOOT.INI have to go in to C:\ to work With ntdr NTDETECT.COM Do you actually use any of the installations that you're talking about? I rather doubt it, none of the ARC paths in his posted boot.ini point to anything! The partitions always start at 1 and the disk() parameter is only used with scsi disks, for other installations it is always disk(0)... John |
#8
|
|||
|
|||
PCR -here
Hot-Text wrote:
ok you right I **** you! Hey! I've got hemorrhoids! I'll do to make a Win 98 Disk and a win 2000 Disk Drive PC today and give it right! OK, then. But if anything bad happens, it's on your head! I said, I'm no big expert with Boot.ini's! LOOL -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, Should things get worse after this, PCR |
#9
|
|||
|
|||
PCR -here
I install 98 on disk 0 partition 2
install 2000 on disk 1 partition it may this Book.ini [boot loader] timeout=30 default=multi(0)disk(0)rdisk(1)partition(1)\WINNT [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINNT="Windows 2000" /fastdetect c:\ = "Window 98" All night job it was but it Works PCP & legg |
#10
|
|||
|
|||
PCR -here
Big Bertha Thing Halfrail
Cosmic Ray Series Possible Real World System Constructs http://www.bigberthathing.com/halfrail.html Access page JPG 22K Image Astrophysics net ring access site Newsgroup Reviews including uk.rec.gardening Detail in photgraph of a model of Track on the Bottom Monorail Half. Caption;- Schilowsky's Monorail Car. Extract from Chapter V;- 73. Another ingenious application of the gyroscope to a monorail car has lately (Feb., 1914) been made by Monsieur Schilowsky, a Russian inventor..... So far as experiments have gone at present the weight of the gyroscope is designed to be something between 1/10th and 1/25th of the whole weight of the car, while the two pendulums together are about 1/3rd of the weight of the gyroscope. The author is indebted to M. Schilosky both for the diagrams and the photograph from which plate IV has been made. A model of the car has been presented by the inventor to the Science Museum at South Kensington and can be viewed by the public at anytime. An article on this monorail is to be found in the issue of The Engineer for January 23, 1914. From the book An Elementary Treatment of the Theory of Spinning Tops and Gyroscopic Motion. By Harold Crabtree M.A. Formerly Scholar of Pembroke College, Cambridge Assistant Master at Charterhouse Longmans, Green and Co. 1923 First Edition 1909 Second Edition 1914 New Impression 1923 (C) Copyright Tony Lance 1998 Distribute complete and free of charge to comply. Big Bertha Thing handbook 1. Handbook thread one posting long. 2. Correctly attributed. 3. Professional. 4. Steet savvy. 5. Well read. 6. Appropriate. 7. Source softly spoken. 8. Solitary. 9. More Sesame Street than Darth Vader. 10. Optional, optimal and optical. Tony Lance ++++++++++++++++++++++++++++++++++++++++++++++++++ + ---------- Forwarded message ---------- From: "Dave Patrick" Date: May 8, 7:20*pm Subject: RIP Tony Lance To: microsoft.public.windowsnt.setup ---------- Forwarded message ---------- From: NT Guy Date: May 10, 1:40*pm Subject: RIP Tony Lance To: microsoft.public.windowsnt.setup ++++++++++++++++++++++++++++++++++++ Newsgroups: microsoft.public.windowsnt.setup From: John John - MVP Date: Sun, 14 Nov 2010 09:31:12 -0400 Local: Sun, Nov 14 2010 1:31 pm Subject: RIP Tony Lance ---------- Forwarded message ---------- From: "Paul Pedersen" Date: Mar 23 2009, 10:56*pm Subject: Windows Firewall blocking SQL Server To: microsoft.public.sqlserver.server, microsoft.public.windows.server.general Thanks. "Dave Patrick" wrote in message ---------- Forwarded message ---------- From: "Paul Pedersen" Date: Apr 3 2004, 9:44*pm Subject: Problem with printing in VFP8 To: microsoft.public.fox.vfp.dbc ---------- Forwarded message ---------- From: (Paul Pedersen) Date: Jul 2 1993, 8:26*pm Subject: Solving quintics and higher To: sci.math ---------- Forwarded message ---------- From: (paul pedersen) Date: Apr 18 1990, 5:57*am Subject: A brief survey. To: sci.physics ++++++++++++++++++++++++++++++++++++++++ On Nov 15, 4:52*pm, John John - MVP wrote: On 11/15/2010 9:41 AM, legg wrote: |
Thread Tools | |
Display Modes | |
|
|