If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
CDRTC.DLL - Mart
I am starting this new thread to make things easier for Mart.
Please, bear with me on this. Thank you. Harry. |
#2
|
|||
|
|||
CDRTC.DLL - Mart
Sorry Harry, I just missed this new thread before I'd pressed the Send
button and tagged onto the previous one. However, we may as well keep with this one. So here it is again :- Harry wrote :- Been there and already done that, Mart. It checks out allright as 'G'. Harry. I should jolly-well hope so Harry! So, now that you've tested and proved that your A: drive and your CD-ROM are NOT faulty AND they (along with all your other drives) are all where they should be (drive letters are correct in WinMe Normal Mode) - what's the problem? You said on 26 May 2006 @ 14:27 that :- 1. No quick-fix for A ( didn't try disconnecting the cable and reconnecting it yet). So what problems are you (still?) having with your A: drive? You also said on 26 May 2006 @ 14:27 that :- 2. When you read through the thread, you will find that my CD-ROM drive is listed only as 'W' anymore, when it used to be 'R/W'. Where did the 'R' go? As Shane asked :- Listed where? Unless or until you install your 'burner' software, your CD-ROM will not be recognised (and function) as a burner (Writer), but perform only as a CD-ROM (Reader) drive. So what other problems are you now having with your CD-ROM (the G drive? I await the next instalment g Mart "webster72n" wrote in message ... I am starting this new thread to make things easier for Mart. Please, bear with me on this. Thank you. Harry. |
#3
|
|||
|
|||
CDRTC.DLL - Mart
Not sure whether you mean 'in-' or 'uninstall', Mart. When it comes to install, the machine says "This program cnnot be run in DOS-Mode". I certainly can't install it in normal mode under windows, because that's where the problem lies with both drives, unless there is another way. If you mean uninstall, I 'searched and destroyed' far and wide. Therefore I am out of options, except for replacement of the drives. Harry. "Mart" wrote in message ... Sorry Harry, I just missed this new thread before I'd pressed the Send button and tagged onto the previous one. However, we may as well keep with this one. So here it is again :- Harry wrote :- Been there and already done that, Mart. It checks out allright as 'G'. Harry. I should jolly-well hope so Harry! So, now that you've tested and proved that your A: drive and your CD-ROM are NOT faulty AND they (along with all your other drives) are all where they should be (drive letters are correct in WinMe Normal Mode) - what's the problem? You said on 26 May 2006 @ 14:27 that :- 1. No quick-fix for A ( didn't try disconnecting the cable and reconnecting it yet). So what problems are you (still?) having with your A: drive? You also said on 26 May 2006 @ 14:27 that :- 2. When you read through the thread, you will find that my CD-ROM drive is listed only as 'W' anymore, when it used to be 'R/W'. Where did the 'R' go? As Shane asked :- Listed where? Unless or until you install your 'burner' software, your CD-ROM will not be recognised (and function) as a burner (Writer), but perform only as a CD-ROM (Reader) drive. So what other problems are you now having with your CD-ROM (the G drive? I await the next instalment g Mart "webster72n" wrote in message ... I am starting this new thread to make things easier for Mart. Please, bear with me on this. Thank you. Harry. |
#4
|
|||
|
|||
CDRTC.DLL - Mart
Not the bloody drivers Harry - it doesn't need them!!
THE BURNER SOFTWARE - Nero, or Roxio/Adaptec/Sonic!!! -- Noel Paton (MS-MVP 2002-2006, Windows) Nil Carborundum Illegitemi http://www.crashfixpc.com/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "webster72n" wrote in message ... Not sure whether you mean 'in-' or 'uninstall', Mart. When it comes to install, the machine says "This program cnnot be run in DOS-Mode". I certainly can't install it in normal mode under windows, because that's where the problem lies with both drives, unless there is another way. If you mean uninstall, I 'searched and destroyed' far and wide. Therefore I am out of options, except for replacement of the drives. Harry. "Mart" wrote in message ... Sorry Harry, I just missed this new thread before I'd pressed the Send button and tagged onto the previous one. However, we may as well keep with this one. So here it is again :- Harry wrote :- Been there and already done that, Mart. It checks out allright as 'G'. Harry. I should jolly-well hope so Harry! So, now that you've tested and proved that your A: drive and your CD-ROM are NOT faulty AND they (along with all your other drives) are all where they should be (drive letters are correct in WinMe Normal Mode) - what's the problem? You said on 26 May 2006 @ 14:27 that :- 1. No quick-fix for A ( didn't try disconnecting the cable and reconnecting it yet). So what problems are you (still?) having with your A: drive? You also said on 26 May 2006 @ 14:27 that :- 2. When you read through the thread, you will find that my CD-ROM drive is listed only as 'W' anymore, when it used to be 'R/W'. Where did the 'R' go? As Shane asked :- Listed where? Unless or until you install your 'burner' software, your CD-ROM will not be recognised (and function) as a burner (Writer), but perform only as a CD-ROM (Reader) drive. So what other problems are you now having with your CD-ROM (the G drive? I await the next instalment g Mart "webster72n" wrote in message ... I am starting this new thread to make things easier for Mart. Please, bear with me on this. Thank you. Harry. |
#5
|
|||
|
|||
CDRTC.DLL - Mart
Harry,
'Scuse me while I go for lie-down in a darkened room. Mart "webster72n" wrote in message ... Not sure whether you mean 'in-' or 'uninstall', Mart. When it comes to install, the machine says "This program cnnot be run in DOS-Mode". I certainly can't install it in normal mode under windows, because that's where the problem lies with both drives, unless there is another way. If you mean uninstall, I 'searched and destroyed' far and wide. Therefore I am out of options, except for replacement of the drives. Harry. |
#6
|
|||
|
|||
CDRTC.DLL - Mart
Jeepers Harry - you could have mentioned the A: drive was STILL missing
(faulty) in WinMe - Normal and/or Safe Mode Harry? AND WE ARE TALKING ABOUT THE A: DRIVE ONLY!!!!! I though that we were on a 'new' thread - it's no use tacking it down the bottom of the old one!! Mart "webster72n" wrote in message ... Not sure whether you mean 'in-' or 'uninstall', Mart. When it comes to install, the machine says "This program cnnot be run in DOS-Mode". I certainly can't install it in normal mode under windows, because that's where the problem lies with both drives, unless there is another way. If you mean uninstall, I 'searched and destroyed' far and wide. Therefore I am out of options, except for replacement of the drives. Harry. "Mart" wrote in message ... Sorry Harry, I just missed this new thread before I'd pressed the Send button and tagged onto the previous one. However, we may as well keep with this one. So here it is again :- Harry wrote :- Been there and already done that, Mart. It checks out allright as 'G'. Harry. I should jolly-well hope so Harry! So, now that you've tested and proved that your A: drive and your CD-ROM are NOT faulty AND they (along with all your other drives) are all where they should be (drive letters are correct in WinMe Normal Mode) - what's the problem? You said on 26 May 2006 @ 14:27 that :- 1. No quick-fix for A ( didn't try disconnecting the cable and reconnecting it yet). So what problems are you (still?) having with your A: drive? You also said on 26 May 2006 @ 14:27 that :- 2. When you read through the thread, you will find that my CD-ROM drive is listed only as 'W' anymore, when it used to be 'R/W'. Where did the 'R' go? As Shane asked :- Listed where? Unless or until you install your 'burner' software, your CD-ROM will not be recognised (and function) as a burner (Writer), but perform only as a CD-ROM (Reader) drive. So what other problems are you now having with your CD-ROM (the G drive? I await the next instalment g Mart "webster72n" wrote in message ... I am starting this new thread to make things easier for Mart. Please, bear with me on this. Thank you. Harry. |
#7
|
|||
|
|||
CDRTC.DLL - Mart
Poor wee thing.....would you care for a dram of Scotch......or the whole
damn bottle, lol. I believe you have now gone *above and beyond*.....you deserve this rest. XX Heather "Mart" wrote in message ... Harry, 'Scuse me while I go for lie-down in a darkened room. Mart "webster72n" wrote in message ... Not sure whether you mean 'in-' or 'uninstall', Mart. When it comes to install, the machine says "This program cnnot be run in DOS-Mode". I certainly can't install it in normal mode under windows, because that's where the problem lies with both drives, unless there is another way. If you mean uninstall, I 'searched and destroyed' far and wide. Therefore I am out of options, except for replacement of the drives. Harry. |
#8
|
|||
|
|||
CDRTC.DLL - Mart
"Mart" wrote in message
... Jeepers Harry - you could have mentioned the A: drive was STILL missing (faulty) in WinMe - Normal and/or Safe Mode Harry? AND WE ARE TALKING ABOUT THE A: DRIVE ONLY!!!!! I though that we were on a 'new' thread - it's no use tacking it down the bottom of the old one!! Mart "webster72n" wrote in message ... Not sure whether you mean 'in-' or 'uninstall', Mart. When it comes to install, the machine says "This program cnnot be run in DOS-Mode". I certainly can't install it in normal mode under windows, because that's where the problem lies with both drives, unless there is another way. If you mean uninstall, I 'searched and destroyed' far and wide. Therefore I am out of options, except for replacement of the drives. Harry. "Mart" wrote in message ... Sorry Harry, I just missed this new thread before I'd pressed the Send button and tagged onto the previous one. However, we may as well keep with this one. So here it is again :- Harry wrote :- Been there and already done that, Mart. It checks out allright as 'G'. Harry. I should jolly-well hope so Harry! So, now that you've tested and proved that your A: drive and your CD-ROM are NOT faulty AND they (along with all your other drives) are all where they should be (drive letters are correct in WinMe Normal Mode) - what's the problem? You said on 26 May 2006 @ 14:27 that :- 1. No quick-fix for A ( didn't try disconnecting the cable and reconnecting it yet). So what problems are you (still?) having with your A: drive? You also said on 26 May 2006 @ 14:27 that :- 2. When you read through the thread, you will find that my CD-ROM drive is listed only as 'W' anymore, when it used to be 'R/W'. Where did the 'R' go? As Shane asked :- Listed where? Unless or until you install your 'burner' software, your CD-ROM will not be recognised (and function) as a burner (Writer), but perform only as a CD-ROM (Reader) drive. So what other problems are you now having with your CD-ROM (the G drive? I await the next instalment g Mart "webster72n" wrote in message ... I am starting this new thread to make things easier for Mart. Please, bear with me on this. Thank you. Harry. |
#9
|
|||
|
|||
CDRTC.DLL - Mart
lol
Joan Mart wrote: Harry, 'Scuse me while I go for lie-down in a darkened room. Mart |
#10
|
|||
|
|||
CDRTC.DLL - Mart
Suitably refreshed Heather, a couple of drams (well, tinnies) AND 40 minutes
of The Eagles (BBC1 TV) Right Harry - What's your next problem? Mart "Heather" wrote in message ... Poor wee thing.....would you care for a dram of Scotch......or the whole damn bottle, lol. I believe you have now gone *above and beyond*.....you deserve this rest. XX Heather "Mart" wrote in message ... Harry, 'Scuse me while I go for lie-down in a darkened room. Mart "webster72n" wrote in message ... Not sure whether you mean 'in-' or 'uninstall', Mart. When it comes to install, the machine says "This program cnnot be run in DOS-Mode". I certainly can't install it in normal mode under windows, because that's where the problem lies with both drives, unless there is another way. If you mean uninstall, I 'searched and destroyed' far and wide. Therefore I am out of options, except for replacement of the drives. Harry. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CDRTC.DLL cannot start | webster72n | General | 38 | May 26th 06 07:35 PM |
Attn: Mart -- Not enough memory | caroloyl | General | 3 | January 20th 06 11:15 PM |
Mart - "not enough free memory to run this program" | caroloyl | General | 1 | January 18th 06 11:10 AM |
Mart - "not enough free memory to run this program" | caroloyl | General | 13 | December 2nd 05 10:30 PM |
PING - Mart, Noel, Alan (and Mike) | Job | Software & Applications | 10 | February 7th 05 12:21 AM |