If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Problem with encoding date - but works on Win98
Hi all
My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98, and can be reinstalled and work on Win98. ´ On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. I tried it on to Win XP computers, the result is the same. That was yesterday, 15.05.2010. It does not even read in the language or anything. All functions result in an access violation error. As it works on Win98, it has to be related to some kind of windows DLL or something. Any ideas anyone? WBR Sonnich |
#2
|
|||
|
|||
Problem with encoding date - but works on Win98
"jodleren" wrote in message
... My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98 . . . On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. Windows XP offers "compatibility" settings, to emulate Win95 or Win98, which solves this type of problem about 80 per cent of the time. "Compatibility" is explained via / Start / Help. -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
#3
|
|||
|
|||
Problem with encoding date - but works on Win98
"jodleren" wrote in message
... My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98 . . . On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. Windows XP offers "compatibility" settings, to emulate Win95 or Win98, which solves this type of problem about 80 per cent of the time. "Compatibility" is explained via / Start / Help. -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
#4
|
|||
|
|||
Problem with encoding date - but works on Win98
On May 16, 7:23*pm, "Don Phillipson" wrote:
"jodleren" wrote in message ... My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98 . . . On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. Windows XP offers "compatibility" settings, to emulate Win95 or Win98, which solves this type of problem about 80 per cent of the time. *"Compatibility" is explained via / Start / Help. Thanks for the idea. That does not help, for both win 95 and win 98. The error remain. Sonnich |
#5
|
|||
|
|||
Problem with encoding date - but works on Win98
On May 16, 7:23*pm, "Don Phillipson" wrote:
"jodleren" wrote in message ... My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98 . . . On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. Windows XP offers "compatibility" settings, to emulate Win95 or Win98, which solves this type of problem about 80 per cent of the time. *"Compatibility" is explained via / Start / Help. Thanks for the idea. That does not help, for both win 95 and win 98. The error remain. Sonnich |
#6
|
|||
|
|||
Problem with encoding date - but works on Win98
From: "jodleren"
| On May 16, 7:23 pm, "Don Phillipson" wrote: "jodleren" wrote in message ... My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98 . . . On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. Windows XP offers "compatibility" settings, to emulate Win95 or Win98, which solves this type of problem about 80 per cent of the time. "Compatibility" is explained via / Start / Help. | Thanks for the idea. That does not help, for both win 95 and win 98. | The error remain. 1. Win9x/ME is a different family than NT and thus can have compatibilities issues if it isn't coded to be NT caompatible. 2. It probably wasn't Y2K compliant and thus the error. -- Dave http://www.claymania.com/removal-trojan-adware.html Multi-AV - http://www.pctipp.ch/downloads/dl/35905.asp |
#7
|
|||
|
|||
Problem with encoding date - but works on Win98
From: "jodleren"
| On May 16, 7:23 pm, "Don Phillipson" wrote: "jodleren" wrote in message ... My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98 . . . On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. Windows XP offers "compatibility" settings, to emulate Win95 or Win98, which solves this type of problem about 80 per cent of the time. "Compatibility" is explained via / Start / Help. | Thanks for the idea. That does not help, for both win 95 and win 98. | The error remain. 1. Win9x/ME is a different family than NT and thus can have compatibilities issues if it isn't coded to be NT caompatible. 2. It probably wasn't Y2K compliant and thus the error. -- Dave http://www.claymania.com/removal-trojan-adware.html Multi-AV - http://www.pctipp.ch/downloads/dl/35905.asp |
#8
|
|||
|
|||
Problem with encoding date - but works on Win98
ms-its:C:\WINDOWS\Help\misc.chm::/compatibility_tab_and_wizard.htm
Go to the Program *.exe File Right Click it Open Properties Go to Compatibility in Properties Check Mark Run this Program in Compatibility made for: Window 98 / Window Me Click Apply Click OK To run the Program Compatibility Wizard Start the Program Compatibility ( hcp://system/compatctr/compatmode.htm ) Wizard. Follow the instructions in the wizard. Note To start the Program Compatibility Wizard, click Start, click Help and Support, click Find compatible hardware and software for Windows XP, and then, under See Also in the navigation pane, click Program Compatibility Wizard. Set the compatibility properties manually As an alternative to running the Program Compatibility Wizard, you can set the compatibility properties for a program manually. The settings are the same as the options in the Program Compatibility Wizard. To set the compatibility properties for a program manually Right-click the program icon on your desktop or the shortcut on the Start menu for the program you want to run, and then click Properties. Click the Compatibility tab, and change the compatibility settings for your program. Notes The Compatibility tab is only available for programs installed on your hard drive. Although you can run the Program Compatibility Wizard on programs or setup files on a CD-ROM or floppy disk, your changes will not remain in effect after you close the program. For more information about an option on the Compatibility tab, right-click the option and then click What's This. "jodleren" wrote in message ... Hi all My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98, and can be reinstalled and work on Win98. ´ On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. I tried it on to Win XP computers, the result is the same. That was yesterday, 15.05.2010. It does not even read in the language or anything. All functions result in an access violation error. As it works on Win98, it has to be related to some kind of windows DLL or something. Any ideas anyone? WBR Sonnich |
#9
|
|||
|
|||
Problem with encoding date - but works on Win98
ms-its:C:\WINDOWS\Help\misc.chm::/compatibility_tab_and_wizard.htm Go to the Program *.exe File Right Click it Open Properties Go to Compatibility in Properties Check Mark Run this Program in Compatibility made for: Window 98 / Window Me Click Apply Click OK To run the Program Compatibility Wizard Start the Program Compatibility ( hcp://system/compatctr/compatmode.htm ) Wizard. Follow the instructions in the wizard. Note To start the Program Compatibility Wizard, click Start, click Help and Support, click Find compatible hardware and software for Windows XP, and then, under See Also in the navigation pane, click Program Compatibility Wizard. Set the compatibility properties manually As an alternative to running the Program Compatibility Wizard, you can set the compatibility properties for a program manually. The settings are the same as the options in the Program Compatibility Wizard. To set the compatibility properties for a program manually Right-click the program icon on your desktop or the shortcut on the Start menu for the program you want to run, and then click Properties. Click the Compatibility tab, and change the compatibility settings for your program. Notes The Compatibility tab is only available for programs installed on your hard drive. Although you can run the Program Compatibility Wizard on programs or setup files on a CD-ROM or floppy disk, your changes will not remain in effect after you close the program. For more information about an option on the Compatibility tab, right-click the option and then click What's This. "jodleren" wrote in message ... Hi all My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98, and can be reinstalled and work on Win98. ´ On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. I tried it on to Win XP computers, the result is the same. That was yesterday, 15.05.2010. It does not even read in the language or anything. All functions result in an access violation error. As it works on Win98, it has to be related to some kind of windows DLL or something. Any ideas anyone? WBR Sonnich |
#10
|
|||
|
|||
Problem with encoding date - but works on Win98
On May 16, 10:32*pm, "Hot-text" wrote:
ms-its:C:\WINDOWS\Help\misc.chm::/compatibility_tab_and_wizard.htm Go to the Program *.exe File Right Click it Open Properties Go to Compatibility in Properties Check Mark Run this Program in Compatibility made for: Window 98 / Window Me Click Apply Click OK To run the Program Compatibility Wizard Start the Program Compatibility ( hcp://system/compatctr/compatmode.htm ) Wizard. Follow the instructions in the wizard. *Note To start the Program Compatibility Wizard, click Start, click Help and Support, click Find compatible hardware and software for Windows XP, and then, under See Also in the navigation pane, click Program Compatibility Wizard. Set the compatibility properties manually As an alternative to running the Program Compatibility Wizard, you can set the compatibility properties for a program manually. The settings are the same as the options in the Program Compatibility Wizard. To set the compatibility properties for a program manually Right-click the program icon on your desktop or the shortcut on the Start menu for the program you want to run, and then click Properties. Click the Compatibility tab, and change the compatibility settings for your program. *Notes The Compatibility tab is only available for programs installed on your hard drive. Although you can run the Program Compatibility Wizard on programs or setup files on a CD-ROM or floppy disk, your changes will not remain in effect after you close the program. For more information about an option on the Compatibility tab, right-click the option and then click What's This. "jodleren" wrote in message ... Hi all My problem is an older programme, Next from SCM for Windor 60 to exact. Probably that doesnt tell you much. Originally it works on Win98, and can be reinstalled and work on Win98. ´ On Win XP however, it will work the first time, but after that it will give this error: Invalid argument to date encode. Then an access violation will occur, and the programme will not work. I tried it on to Win XP computers, the result is the same. That was yesterday, 15.05.2010. It does not even read in the language or anything. All functions result in an access violation error. As it works on Win98, it has to be related to some kind of windows DLL or something. Any ideas anyone? WBR Sonnich The compability issue does not solve it. Not is it a Y2K problem, as it works on Win98. So, any other suggestions? WBT Sonnich |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Unable to change / switch page encoding | [email protected] | General | 1 | June 24th 06 01:51 AM |
Win98 - Regional Setting - Date will not respond | Win_Newbie | General | 2 | January 2nd 06 03:42 PM |
date & time problem | tuuf | General | 3 | May 3rd 05 11:00 PM |
My system date is having problem | Exotic | General | 23 | March 24th 05 01:58 AM |
Encoding Problem | rmendaann | Internet | 2 | December 17th 04 01:57 PM |