A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Problems with drivers



 
 
Thread Tools Display Modes
  #1  
Old July 2nd 04, 09:39 PM
Ryan
external usenet poster
 
Posts: n/a
Default Problems with drivers

Yesterday my computer gave me a "Windows Protection Error"
eventually i was able to get it to stop saying that but it
appears there are 3 drivers which are no longer working, 2
for my harddrive and one for my A drive. Since we have
gotten the computer out of safe mode we have been unable
to change our computer's resolution back to 800x600 from
the default or change the 16 bit color to 256. Anyhelp
would be greatly appreciated.

~Ryan
  #2  
Old July 3rd 04, 03:05 AM
PCR
external usenet poster
 
Posts: n/a
Default Problems with drivers

What makes you say three drivers are not working?

http://support.microsoft.com/default...39&Product=w98
Troubleshooting Video Problems in Windows

"START, Run, MSConfig, Advanced button". If checked, then uncheck "VGA
640x480x16", & reboot.

"Control Panel, Display, Settings tab". Select as you wish from the
Colors dropdown menu & the Size slider. Really, you should need nothing
higher than "High Color (16 bit)", for speed/resource considerations.

If you move the Screen Area slider to 1024x768 there, be sure to click
the Advanced button, & select Large fonts.

Try to get your colors/size at least twice that way. If it continues to
fail, you may need to reinstall your Monitor or Display Adapter...

For the Monitor...
(1) Boot to Safe Mode
(Hold F5 as you boot or CTRL for the Startup Menu)
(2) "START, Settings, Control Panel, System, Device Manager tab"
(3) Open the Monitors branch, & Remove all entries.

Perhaps, FIRST, even in Normal Mode, note what is installed
similar to below for the Adapter. That is...
(a) D-Clk the monitor there for Properties, Driver tab.
(b) Click the Update Driver button, then "Next".
(c) Bolt "Display a list...", & click "Next".
(d) Bolt "Show all hardware".
Examine the two panes to see what is currently installed.
That is likely what you wish to end up with, after step (4).

(4) Boot to Normal Mode.

Hopefully, it will be rediscovered & installed. Then, if still
necessary, here is the rigmarole of the Display Adapter...

.......Quote..........
The first thing to do is to remove the video adapter you have
installed. Right-click on the desktop; choose "Properties" from the
drop-down menu; select "Settings;" click on the "Advanced" button; and
click on "Adapter". An adapter is a program that tells Windows how to
deal with a specific video card. Make note of the adapter that is
currently installed. Then, change the adapter to "Standard Display
Adapter (VGA)" and restart the system.

[That is: Click "Change, Next, bolt 'Display a List...', Next, bolt
'Show all hardware', scroll left pane to top, select '(Standard display
types)', select 'Standard Display Adapter (VGA)' in right pane, click
'Next'"... PCR]

This will remove the current adapter and replace it with a generic VGA
adapter that works with all video cards. You will not like VGA because
it supports only 16 colors, but the purpose of installing it is to get
rid of whatever was there before.

Next, return to the adapter screen and install an adapter that matches
your video card. This may or may not be the adapter that you are
using now. Examine the materials you received with your computer to
see if they include a CD-ROM or floppy disk that contains the correct
video adapter. Or go to the Gateway website and see if they have an
adapter for you to download. Or check the website of the company that
made your video card.

Bill Starbuck (MVP)
.......End....of quote....


--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
should things get worse after this,
PCR

"Ryan" wrote in message
...
| Yesterday my computer gave me a "Windows Protection Error"
| eventually i was able to get it to stop saying that but it
| appears there are 3 drivers which are no longer working, 2
| for my harddrive and one for my A drive. Since we have
| gotten the computer out of safe mode we have been unable
| to change our computer's resolution back to 800x600 from
| the default or change the 16 bit color to 256. Anyhelp
| would be greatly appreciated.
|
| ~Ryan


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
"My Computer" problems John General 2 July 1st 04 04:28 AM
need locations for drivers on 98se install cd Scott General 7 June 29th 04 03:26 AM
Missing Drivers Ron General 3 June 28th 04 05:37 PM
Why are Win98 USB Memory Stick drivers not generic ? tequilaboat General 2 June 18th 04 04:33 PM
Wrong audio drivers persistent Mike Easter General 10 June 9th 04 11:27 PM


All times are GMT +1. The time now is 01:57 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.