If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Strange problem.
Not a strange problem really I'm sure. I just don't know how to get out of
it I run 98se and have 2 hard drives. I decided to install Win2000 on my second drive to see how it was then decided against using it. During installation I requested NTFS. Having abandoned this project I am now back with my original 98se installation and the second drive ( ex win2000 ) is installed and can be seen during post etc... but I cannot "see" it from win98se ( presumably because of NTFS ) How do I get to the drive to reformat it as FAT32 ?? Hope this makes sense - any help greatly appreciated. J |
#2
|
|||
|
|||
"joe" wrote in message ...
I run 98se and have 2 hard drives. I decided to install Win2000 on my second drive to see how it was then decided against using it. During installation I requested NTFS. Having abandoned this project I am now back with my original 98se installation and the second drive ( ex win2000 ) is installed and can be seen during post etc... but I cannot "see" it from win98se ( presumably because of NTFS ) How do I get to the drive to reformat it as FAT32 ?? 1. Use Win2K FDISK to remove partition(s). 2. Use Win98 FDISK to create and format partition(s). -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
#3
|
|||
|
|||
Thanks Don
Small problem. I can no longer get into Win2000, can that FDISK be extracted from the CD ? Thanx for your help "Don Phillipson" wrote in message ... "joe" wrote in message ... I run 98se and have 2 hard drives. I decided to install Win2000 on my second drive to see how it was then decided against using it. During installation I requested NTFS. Having abandoned this project I am now back with my original 98se installation and the second drive ( ex win2000 ) is installed and can be seen during post etc... but I cannot "see" it from win98se ( presumably because of NTFS ) How do I get to the drive to reformat it as FAT32 ?? 1. Use Win2K FDISK to remove partition(s). 2. Use Win98 FDISK to create and format partition(s). -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
#4
|
|||
|
|||
_generally speaking_..
Boot with a win98 DOS startup floppy and run fdisk, saying "yes" to "large disk support". Select the 2nd drive and delete the "non-dos" partition. Create an extended partition in its place. Create a "logical" within that. Exit fdisk, reboot and format the drive from windows explorer. I don't know the exact syntax of any of these steps, as I seldom use fdisk, but that should give you the general idea. "joe" wrote in message ... Thanks Don Small problem. I can no longer get into Win2000, can that FDISK be extracted from the CD ? Thanx for your help "Don Phillipson" wrote in message ... "joe" wrote in message ... I run 98se and have 2 hard drives. I decided to install Win2000 on my second drive to see how it was then decided against using it. During installation I requested NTFS. Having abandoned this project I am now back with my original 98se installation and the second drive ( ex win2000 ) is installed and can be seen during post etc... but I cannot "see" it from win98se ( presumably because of NTFS ) How do I get to the drive to reformat it as FAT32 ?? 1. Use Win2K FDISK to remove partition(s). 2. Use Win98 FDISK to create and format partition(s). -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
#5
|
|||
|
|||
Sorry Don
After doing some more exploring ( I am not very adept at this sort of thing ) I found the following option in win98 FDISK Change Current fixed Drive When I selected this I could suddenly see the ntfs partition and was able to delete and rebuild etc.... Sorry for the confusion, maybe other inexperienced users can learn from this. Thanx again J "joe" wrote in message ... Thanks Don Small problem. I can no longer get into Win2000, can that FDISK be extracted from the CD ? Thanx for your help "Don Phillipson" wrote in message ... "joe" wrote in message ... I run 98se and have 2 hard drives. I decided to install Win2000 on my second drive to see how it was then decided against using it. During installation I requested NTFS. Having abandoned this project I am now back with my original 98se installation and the second drive ( ex win2000 ) is installed and can be seen during post etc... but I cannot "see" it from win98se ( presumably because of NTFS ) How do I get to the drive to reformat it as FAT32 ?? 1. Use Win2K FDISK to remove partition(s). 2. Use Win98 FDISK to create and format partition(s). -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
#6
|
|||
|
|||
You can get one he
http://www.bootdisk.com/ Please read the Read Me in the right frame for instructions on extracting/using the downloads. -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://www.dts-l.org/goodpost.htm http://basconotw.mvps.org/ "joe" wrote in message ... Thanks Don Small problem. I can no longer get into Win2000, can that FDISK be extracted from the CD ? Thanx for your help "Don Phillipson" wrote in message ... "joe" wrote in message ... I run 98se and have 2 hard drives. I decided to install Win2000 on my second drive to see how it was then decided against using it. During installation I requested NTFS. Having abandoned this project I am now back with my original 98se installation and the second drive ( ex win2000 ) is installed and can be seen during post etc... but I cannot "see" it from win98se ( presumably because of NTFS ) How do I get to the drive to reformat it as FAT32 ?? 1. Use Win2K FDISK to remove partition(s). 2. Use Win98 FDISK to create and format partition(s). -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
#7
|
|||
|
|||
"Bill Blanton" wrote in message
... _generally speaking_.. Boot with a win98 DOS startup floppy and run fdisk, saying "yes" to "large disk support". Select the 2nd drive and delete the "non-dos" partition. Create an extended partition in its place. Create a "logical" within that. Exit fdisk, reboot and format the drive from windows explorer. I don't know the exact syntax of any of these steps, as I seldom use fdisk, but that should give you the general idea. There really isn't any once you enter FDISK. Choices in fdisk are made by selecting #'s and pressing Enter other than giving the volume a name, which of course is typed in. Once finished with fdisk, simply reboot and then format or press ESC to back out to the DOS prompt. -- Brian A. Sesko { MS MVP_Shell/User } Conflicts start where information lacks. http://www.dts-l.org/goodpost.htm http://basconotw.mvps.org/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Windows 98 machine boot problem due to ndiswan.vxd missing file | Martin Healy | Setup & Installation | 1 | May 10th 05 07:38 PM |
Continued problem with Slow System | bgaard | General | 9 | January 13th 05 11:08 PM |
Strange non-printing problem | John Earle | General | 2 | December 21st 04 05:07 PM |
Problem starting windows | Pat | General | 10 | October 21st 04 01:23 AM |
Can NOt Drag Icons after a short time of use. | Justin Baker | Improving Performance | 11 | July 12th 04 07:35 PM |