A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Networking
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

DSL router and network



 
 
Thread Tools Display Modes
  #1  
Old November 7th 05, 11:19 PM
M Mordkovych
external usenet poster
 
Posts: n/a
Default DSL router and network

How can I connect two Win98 machines to DSL and to each other? What are my
options i. e. routers etc?

TIA MM


  #2  
Old November 7th 05, 11:58 PM
CJT
external usenet poster
 
Posts: n/a
Default DSL router and network

M Mordkovych wrote:

How can I connect two Win98 machines to DSL and to each other? What are my
options i. e. routers etc?

TIA MM


The three possibilities (at least, the three I can think of):

1) Contract with your ISP for two external IP addresses -- not generally
recommended , because unnecessarily expensive -- probably will also
require a (cheap) switch for LAN traffic;

2) Microsoft Internet Connection Sharing (ICS) software -- I think
it's a bad idea because people often have trouble with it, and it
requires that your portal machine be powered on for the secondary
machine to connect to the Internet -- also requires two network
interfaces in the portal machine;

3) Your choice of router -- that's what I would do -- inexpensive,
flexible, and can contribute to security.

HTH. JMHO.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .
  #3  
Old November 7th 05, 11:58 PM posted to microsoft.public.win98.networking
CJT
External Usenet User
 
Posts: 81
Default DSL router and network

M Mordkovych wrote:

How can I connect two Win98 machines to DSL and to each other? What are my
options i. e. routers etc?

TIA MM


The three possibilities (at least, the three I can think of):

1) Contract with your ISP for two external IP addresses -- not generally
recommended , because unnecessarily expensive -- probably will also
require a (cheap) switch for LAN traffic;

2) Microsoft Internet Connection Sharing (ICS) software -- I think
it's a bad idea because people often have trouble with it, and it
requires that your portal machine be powered on for the secondary
machine to connect to the Internet -- also requires two network
interfaces in the portal machine;

3) Your choice of router -- that's what I would do -- inexpensive,
flexible, and can contribute to security.

HTH. JMHO.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .
  #4  
Old November 8th 05, 05:52 AM
M Mordkovych
external usenet poster
 
Posts: n/a
Default DSL router and network

Thanks for reply.

What kind of router has options of both DSL and regular network?

"CJT" wrote in message
...
3) Your choice of router -- that's what I would do -- inexpensive,
flexible, and can contribute to security.



  #5  
Old November 8th 05, 05:52 AM posted to microsoft.public.win98.networking
M Mordkovych
External Usenet User
 
Posts: 32
Default DSL router and network

Thanks for reply.

What kind of router has options of both DSL and regular network?

"CJT" wrote in message
...
3) Your choice of router -- that's what I would do -- inexpensive,
flexible, and can contribute to security.



  #6  
Old November 8th 05, 06:41 AM
CJT
external usenet poster
 
Posts: n/a
Default DSL router and network

M Mordkovych wrote:

Thanks for reply.

What kind of router has options of both DSL and regular network?


Most of them do these days.

"CJT" wrote in message
...

3) Your choice of router -- that's what I would do -- inexpensive,
flexible, and can contribute to security.






--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .
  #7  
Old November 8th 05, 06:41 AM posted to microsoft.public.win98.networking
CJT
External Usenet User
 
Posts: 81
Default DSL router and network

M Mordkovych wrote:

Thanks for reply.

What kind of router has options of both DSL and regular network?


Most of them do these days.

"CJT" wrote in message
...

3) Your choice of router -- that's what I would do -- inexpensive,
flexible, and can contribute to security.






--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .
  #8  
Old November 8th 05, 06:25 PM
M Mordkovych
external usenet poster
 
Posts: n/a
Default DSL router and network

I checked in the routers descriptions and dont see where say that.
What options should I look for?

"CJT" wrote in message
...
M Mordkovych wrote:

Thanks for reply.

What kind of router has options of both DSL and regular network?


Most of them do these days.

"CJT" wrote in message
...

3) Your choice of router -- that's what I would do -- inexpensive,
flexible, and can contribute to security.






--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .



  #9  
Old November 8th 05, 06:25 PM posted to microsoft.public.win98.networking
M Mordkovych
External Usenet User
 
Posts: 32
Default DSL router and network

I checked in the routers descriptions and dont see where say that.
What options should I look for?

"CJT" wrote in message
...
M Mordkovych wrote:

Thanks for reply.

What kind of router has options of both DSL and regular network?


Most of them do these days.

"CJT" wrote in message
...

3) Your choice of router -- that's what I would do -- inexpensive,
flexible, and can contribute to security.






--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .



  #10  
Old November 8th 05, 09:43 PM posted to microsoft.public.win98.networking
CJT
External Usenet User
 
Posts: 81
Default DSL router and network

M Mordkovych wrote:
I checked in the routers descriptions and dont see where say that.
What options should I look for?


Typically a router suitable for use with DSL will have "broadband"
in its name (if it doesn't explicitly say "DSL"). Realize, though,
that some of the DSL "modems" now being provided to new DSL
subscribers include routers built-in, so you might already HAVE a
router.

The LAN side will typically show up on the box as "4-port" (or
however many) -- that's your signal that there's a switch built-in.
Of course, you can construct your own system using a single port
router and a switch (or hub, but hubs seem to be less common every
day). But I suspect most people buy the combined item for
convenience.


"CJT" wrote in message
...

M Mordkovych wrote:


Thanks for reply.

What kind of router has options of both DSL and regular network?


Most of them do these days.

"CJT" wrote in message
...


3) Your choice of router -- that's what I would do -- inexpensive,
flexible, and can contribute to security.




--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .






--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vexating workgroup problem Dr. Dos Networking 18 September 21st 05 06:54 AM
Can't connect to my network printer Martin Healy Networking 8 July 6th 05 10:35 PM
Smart Portable Shortcuts ForestSpirit General 5 February 28th 05 03:50 AM
ZoneAlarm missing Firewall Zones tab for subnet. New NAT router won't show Entire Network. Networking 5 July 5th 04 09:48 AM
ZoneAlarm missing Firewall Zones tab for subnet. New NAT router won't show Entire Network. Networking 5 July 5th 04 09:48 AM


All times are GMT +1. The time now is 10:32 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.