If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
forced adapter update now Error: 0D : 0347 : 000181C
I replaced a GeForce4 MX440 a Kaser FX5200 128 MB Nvidia graphic card.
It's box says it has some nice Nview Multi-Display capabilities and "TV-out support (NTSC/PAL) TV system". Will it support a decent flatscreen? I keep System Monitor on and lately began seeing the system "ekg" flatlining for about 10 seconds, then resuming for 10 seconds, and so on. Also recently an occasional black screen on the monitor it shares over a KVM switch it has shared for years. Monitor & switch probably OK since they act normal with the XP system I'm building. Now I'm seeing blue screens right after logging in, error: 0D : 0347 : 000181C. My googling turms up corrupt program instructions (maybe due to bad opcodes and the like?). And these often come from using wrong video drivers.. I tried forcing the Display applet to switch from the GeForce 4 to a FX5200 and that was a fight. The system says the drivers are unsigned. But it seems to resist changing the adapter to plain old system VGA also/ Any suggestions on getting this old guy bavk to work? This homebuilt is on a Gigabyte 7VT600P-RZC mob, 400 watt MGE psu(should I get a bigger PSU?), 1 GB DDR RAM(Should I add 1 or 2 GB RAM?). CPU is an Athlon XP 1066 MHz. HTH Oceanside Bob |
#2
|
|||
|
|||
forced adapter update now Error: 0D : 0347 : 000181C
On Mar 10, 1:08*am, Bob wrote:
I replaced a GeForce4 MX440 a Kaser FX5200 128 MB Nvidia graphic card. It's box says it has some nice Nview Multi-Display capabilities and "TV-out support (NTSC/PAL) TV system". Will it support a decent flatscreen? I keep System Monitor on and lately began seeing the system "ekg" flatlining for about 10 seconds, then resuming for 10 seconds, and so on. Also recently an occasional black screen on the monitor it shares over a KVM switch it has shared for years. Monitor & switch probably OK since they act normal with the XP system I'm building. Now I'm seeing *blue screens right after logging in, error: 0D : 0347 : 000181C. My googling turms up corrupt program instructions (maybe due to bad opcodes and the like?). And these often come from using wrong video drivers.. I tried forcing the Display applet to switch from the GeForce 4 to a FX5200 and that was a fight. The system says the drivers are unsigned. But it seems to resist changing the adapter to plain old system VGA also/ Any suggestions on getting this old guy bavk to work? This homebuilt is on a Gigabyte 7VT600P-RZC mob, 400 watt MGE psu(should I get a bigger PSU?), 1 GB DDR RAM(Should I add 1 or 2 GB RAM?). CPU is an Athlon XP 1066 MHz. HTH Oceanside Bob May I try this again. At 1 am I should know to get to bed, My core problem is intermittent blackscreens becoming more frequent. One symptom is very interesting - it runs fine is safe mode albeit low res and 64 colors. I suspect a probable intermittent malfunctioning video card - G4 MX440 Nvidia. Maybe overheating. It doesn't have a fan, just a fairly big heatsink. I have a new FX5200 I bought a year or so back. Unfortunately the driver diskette has "dissappeared" but I have found downloads.nvidia.com and downloaded some for win9x. But am having problems getting the winME hardware manager to turn loose the old and take up the new. I thought I could bring it up in safemode, from the control panel display applet replace the adapter. But the system sees the drivers are not signed, and I have to click the advanced button to change things. If I restart in safemode the old drivers are still there. I've tried a couple otherways, most recently changing the adapter to standard vga hoping at least I can bring it up in normal mode and go directly on the Internet as it is painful transferring drivers otherwise. and now I'm getting the blue screen 0D stuff. Anybody know a fast inexpensive way to restore my old guy to perfect health? What is the approved Maybe Nellie & I are opposites, especially at 1 AM. Pardon my verbosity. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Trendnet wireless USB adapter installed on Win98SE, but winipcfg not seeing adapter | [email protected] | Networking | 2 | October 7th 07 09:57 PM |
32: renewing adapter error | [email protected] | Networking | 6 | October 5th 06 10:58 PM |
Display Adapter - Update Drivers Yes/No ? | Star | General | 37 | July 15th 05 03:57 AM |
Win 98SE forced safe mode | momof4 | General | 3 | April 11th 05 07:32 AM |
Display adapter won't accept driver update | Zak | Hardware | 1 | October 5th 04 03:18 PM |