If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Attn: Mart -- Not enough memory
Hi Mart :-))
So glad you found me--had a hard time finding my post myself! I clicked "New Message" to send in my news but I guess I should have used a fresh subject line? I can't figure how these newsgroup threads work :-b Anyway, I've tried two different drivers for my sound card--the one on CD that came with it, and another I got from the Creative web site. Neither made any difference in the way it performed. At one point before I replaced the HD, the properties sheet for the sound card told me I was not authorized to make any changes! (it's allowing them now though). In view of the card's gradual performance decay and recently developed blue-screening of a variety of programs (which always happens after a series of rapid ticks, clicks, beeps or midi plays--never after just the occasional noise), I'll be very happy to have a new one. I once had a spanking new Creative CDRW that never wrote me but three CD's that could be read: I threw out over a dozen failures and lost my temper too '-) ; so in all, my experience with that brand of computer products has been VERY NOT satisfactory. After having more than my fair share of problems with new hardware, it had crossed my mind that I might have defective RAM also :-( but didn't know how to check it. I did manage to get WEFT to install perfectly right after a first boot (not a reboot) but haven't altered Windows' memory handling. I've checked out all Noel's suggestions except for the corrupted swap file, which I can't believe has happened after only a couple weeks of use! I keep all my Temp folders emptied and use Diskeeper to defrag. I reset the SysRes cache at 1095 MB (it was either that or 200 MB--no setting in between?) and its size is 604 MB, 2550 files, 5 folders. I've still got 59.9 GB of free space on C. Thanks muchly for your time and info and the link to DocMemory. I'll post back with the results. calamity carol "Mart" wrote in message ... Hi Carol, good to see that you've managed to replace and set-up your new Samsung HDD. Your 'sound' and OE problems *may or may not* have something to do with your RAM issues, but until you sort the RAM out, don't try troubleshooting too many things at once - it'll only lead to confusion g FWIW - my 'guess' is that the underlying cause of your sound card problems is more likely to be driver related - but see previous paragraph. If the card is 'pre-WinMe' you may well have problems finding the 'perfect' WinMe drivers and have to put-up with the WDM (Windows Driver Model) versions supplied on the WinMe CD (or even Win98 drivers) and live with their short-comings. Not many manufacturers were interested in writing WinMe drivers for their obsolete sound cards - Cynical? Moi?? However, you say that you have only 512 MB fitted, so the Q253912 article should not be relevant - it only applies to memory greater than 512 MB. If you think that your memory *may be* faulty, check out your memory chips using Simmtester's DocMemory from www.simmtester.com or http://www.simmtester.com/page/products/doc/docinfo.asp and create the boot disk from that - run it overnight to check the RAM. One other possibility is that you *may not* be letting Windows manage your swap-file. Confirm that there are no min/max limits set by the User. Let Windows manage it. Don't forget to defrag too g But I seem to recall Noel giving you some pointers in this direction last November. Regarding WEFT, I've no knowledge of this 'application' so I can't really help you with it. However, you should try to confirm that it is expected to run with a minimum of 512 MB from the 'minimum requirements' product specification. Again, see your previous threads for pointers from Noel and Mike etc. In view of the date of the original thread - August thru' December last year - and especially with the change of HDD and a 'clean' installation since then, it might be a good idea to start a brand new thread/topic. Keep to a single issue per topic and don't forget to include error reports. HTH and good luck Mart "caroloyl" wrote in message ... Hi there! I'm back up and running :-)) Installed and formatted the new Samsung drive myself December 30 and am still slowly installing my programs. My sound problem with OE and other programs didn't go away--not with either the new drive or fresh Me and sound-driver install--so I've ordered a new sound card. The sound has been doing other peculiar things for ages, like playing a midi in two different keys at once and "wobbling" (nope, don't have reverb)--so I'm guessing it's used up after less than three years (the life span of cheap?) But I'm really writing for help again with the subject line here because I'm still getting the "not enough memory . . ." error. I got that warning three times trying to install WEFT (MS' embedded-font making tool) before it finally completed. Never had that happen before and I've used WEFT for years--so I did a little looking around in the MS database and found this item referring to having this problem with large amounts of RAM installed (I have 512 MB): http://support.microsoft.com/support.../Q253/9/12.asp It offers two fixes of which--to me--this one, editing the Sys ini file, looks easiest since I haven't a clue what the other's about: http://support.microsoft.com/kb/108079/EN-US/ I've looked at my sys ini and there is nothing at all entered under the [VCache] section. Can specifying a maximum amount for Windows to use help me? And if so how much should I allow it? I read somewhere recently that if unlimited Windows will glom all the available RAM leaving no room for opening another platform (have I remembered that right?)--and I do believe WEFT uses a different one for installation (coarse fonts in the dialog). I've also just found an "out of memory" error in a Java log after trying unsuccessfully to download an applet (installed the latest Sun Java program a few days ago). Your help, as always, much appreciated. carol A couple of things to mention: "caroloyl" wrote in message news:... Thanks for the reassurance guys--I needed that . . . and for your time assessing this matter. I'm sure hoping this will be the end of the line for my string of problems--and I'm consoled to find once again Millennium is not to blame. carol "Mart" wrote in message ... Noel wrote:- The fact that the utility would not complete is almost certainly sufficient evidence that there are physical problems with the HD. ... etc., etc., .. I totally concur with your comments, Noel. For whatever cause - heat, mechanical, surface, etc., - Carol has a (terminally) 'sick disk' Mart |
#2
|
|||
|
|||
Mart -- Not enough memory
Hi Carol, I await to hear the results of your DocMemory tests with interest,
although I'm no longer particularly suspecting RAM issues. Regarding Diskeeper, like WEFT, I don't use it so can't comment (although several other 'regulars' on these WinMe News Groups do and report good results), I prefer to use Scandisk (and Defrag) as supplied by MS. My philosophy being that as MS 'invented' Windows, then their own maintenance utilities *ought* be adequate. My experience of certain Third Party utilities is "disappointment" - e.g. Norton (I've never touched their products since the mid 90's when they progressed?? from DOS to Windows and the 10ft bargepole took on a whole new meaning g) I tend to use almost exclusively (except AV utils) MS utilities and am still here to tell the tale. As I mentioned previously, 'older' soundcards do not sit too comfortably with WinMe and what a surprise that you mentioned Creative g. Forget using their 'bundled' (Win95/98) application software on WinMe - it won't install properly, if at all. Uninstall it (and the drivers - in Safe Mode) and just re-install their (Win98?) drivers ONLY during the reboot (Plug 'n Play) Don't expect any of the original fancy gimmicks (which you might have experienced in Win95/98) and you *might* just find that your .mid files sound reasonably good. ... I once had a spanking new Creative CDRW that never wrote me but three CD's that could be read: I threw out over a dozen failures CD-R's & CD-RW's? - Can often depend on the different 'quality' between manufactures - try a different brand. And sadly, this has also been known to apply to different brands of CD-ROM's and perhaps even more importantly, between different software houses and their versions of burning software. Not all CD-ROM's are recognised by all versions of software, nor media by the CD-ROM - a slight blurring of science, (black) art and moving goal posts. Mart "caroloyl" wrote in message ... Hi Mart :-)) So glad you found me--had a hard time finding my post myself! I clicked "New Message" to send in my news but I guess I should have used a fresh subject line? I can't figure how these newsgroup threads work :-b Anyway, I've tried two different drivers for my sound card--the one on CD that came with it, and another I got from the Creative web site. Neither made any difference in the way it performed. At one point before I replaced the HD, the properties sheet for the sound card told me I was not authorized to make any changes! (it's allowing them now though). In view of the card's gradual performance decay and recently developed blue-screening of a variety of programs (which always happens after a series of rapid ticks, clicks, beeps or midi plays--never after just the occasional noise), I'll be very happy to have a new one. I once had a spanking new Creative CDRW that never wrote me but three CD's that could be read: I threw out over a dozen failures and lost my temper too '-) ; so in all, my experience with that brand of computer products has been VERY NOT satisfactory. After having more than my fair share of problems with new hardware, it had crossed my mind that I might have defective RAM also :-( but didn't know how to check it. I did manage to get WEFT to install perfectly right after a first boot (not a reboot) but haven't altered Windows' memory handling. I've checked out all Noel's suggestions except for the corrupted swap file, which I can't believe has happened after only a couple weeks of use! I keep all my Temp folders emptied and use Diskeeper to defrag. I reset the SysRes cache at 1095 MB (it was either that or 200 MB--no setting in between?) and its size is 604 MB, 2550 files, 5 folders. I've still got 59.9 GB of free space on C. Thanks muchly for your time and info and the link to DocMemory. I'll post back with the results. calamity carol "Mart" wrote in message ... Hi Carol, good to see that you've managed to replace and set-up your new Samsung HDD. Your 'sound' and OE problems *may or may not* have something to do with your RAM issues, but until you sort the RAM out, don't try troubleshooting too many things at once - it'll only lead to confusion g FWIW - my 'guess' is that the underlying cause of your sound card problems is more likely to be driver related - but see previous paragraph. If the card is 'pre-WinMe' you may well have problems finding the 'perfect' WinMe drivers and have to put-up with the WDM (Windows Driver Model) versions supplied on the WinMe CD (or even Win98 drivers) and live with their short-comings. Not many manufacturers were interested in writing WinMe drivers for their obsolete sound cards - Cynical? Moi?? However, you say that you have only 512 MB fitted, so the Q253912 article should not be relevant - it only applies to memory greater than 512 MB. If you think that your memory *may be* faulty, check out your memory chips using Simmtester's DocMemory from www.simmtester.com or http://www.simmtester.com/page/products/doc/docinfo.asp and create the boot disk from that - run it overnight to check the RAM. One other possibility is that you *may not* be letting Windows manage your swap-file. Confirm that there are no min/max limits set by the User. Let Windows manage it. Don't forget to defrag too g But I seem to recall Noel giving you some pointers in this direction last November. Regarding WEFT, I've no knowledge of this 'application' so I can't really help you with it. However, you should try to confirm that it is expected to run with a minimum of 512 MB from the 'minimum requirements' product specification. Again, see your previous threads for pointers from Noel and Mike etc. In view of the date of the original thread - August thru' December last year - and especially with the change of HDD and a 'clean' installation since then, it might be a good idea to start a brand new thread/topic. Keep to a single issue per topic and don't forget to include error reports. HTH and good luck Mart "caroloyl" wrote in message ... Hi there! I'm back up and running :-)) Installed and formatted the new Samsung drive myself December 30 and am still slowly installing my programs. My sound problem with OE and other programs didn't go away--not with either the new drive or fresh Me and sound-driver install--so I've ordered a new sound card. The sound has been doing other peculiar things for ages, like playing a midi in two different keys at once and "wobbling" (nope, don't have reverb)--so I'm guessing it's used up after less than three years (the life span of cheap?) But I'm really writing for help again with the subject line here because I'm still getting the "not enough memory . . ." error. I got that warning three times trying to install WEFT (MS' embedded-font making tool) before it finally completed. Never had that happen before and I've used WEFT for years--so I did a little looking around in the MS database and found this item referring to having this problem with large amounts of RAM installed (I have 512 MB): http://support.microsoft.com/support.../Q253/9/12.asp It offers two fixes of which--to me--this one, editing the Sys ini file, looks easiest since I haven't a clue what the other's about: http://support.microsoft.com/kb/108079/EN-US/ I've looked at my sys ini and there is nothing at all entered under the [VCache] section. Can specifying a maximum amount for Windows to use help me? And if so how much should I allow it? I read somewhere recently that if unlimited Windows will glom all the available RAM leaving no room for opening another platform (have I remembered that right?)--and I do believe WEFT uses a different one for installation (coarse fonts in the dialog). I've also just found an "out of memory" error in a Java log after trying unsuccessfully to download an applet (installed the latest Sun Java program a few days ago). Your help, as always, much appreciated. carol A couple of things to mention: "caroloyl" wrote in message news:... Thanks for the reassurance guys--I needed that . . . and for your time assessing this matter. I'm sure hoping this will be the end of the line for my string of problems--and I'm consoled to find once again Millennium is not to blame. carol "Mart" wrote in message ... Noel wrote:- The fact that the utility would not complete is almost certainly sufficient evidence that there are physical problems with the HD. ... etc., etc., .. I totally concur with your comments, Noel. For whatever cause - heat, mechanical, surface, etc., - Carol has a (terminally) 'sick disk' Mart |
#3
|
|||
|
|||
Mart -- Not enough memory
... I once had a spanking new Creative CDRW that
never wrote me but three CD's that could be read: I threw out over a dozen failures It should be mentioned that upgrading the "firmware" will often resolve burning issues, aside from suitable media. Firmware upgrades can be had at the manufacturer's website. Myself and a friend have determined this can make the difference between burning a good CD/DVD and making coasters. Heirloom, old and think it's gonna rain "Mart" wrote in message ... Hi Carol, I await to hear the results of your DocMemory tests with interest, although I'm no longer particularly suspecting RAM issues. Regarding Diskeeper, like WEFT, I don't use it so can't comment (although several other 'regulars' on these WinMe News Groups do and report good results), I prefer to use Scandisk (and Defrag) as supplied by MS. My philosophy being that as MS 'invented' Windows, then their own maintenance utilities *ought* be adequate. My experience of certain Third Party utilities is "disappointment" - e.g. Norton (I've never touched their products since the mid 90's when they progressed?? from DOS to Windows and the 10ft bargepole took on a whole new meaning g) I tend to use almost exclusively (except AV utils) MS utilities and am still here to tell the tale. As I mentioned previously, 'older' soundcards do not sit too comfortably with WinMe and what a surprise that you mentioned Creative g. Forget using their 'bundled' (Win95/98) application software on WinMe - it won't install properly, if at all. Uninstall it (and the drivers - in Safe Mode) and just re-install their (Win98?) drivers ONLY during the reboot (Plug 'n Play) Don't expect any of the original fancy gimmicks (which you might have experienced in Win95/98) and you *might* just find that your .mid files sound reasonably good. ... I once had a spanking new Creative CDRW that never wrote me but three CD's that could be read: I threw out over a dozen failures CD-R's & CD-RW's? - Can often depend on the different 'quality' between manufactures - try a different brand. And sadly, this has also been known to apply to different brands of CD-ROM's and perhaps even more importantly, between different software houses and their versions of burning software. Not all CD-ROM's are recognised by all versions of software, nor media by the CD-ROM - a slight blurring of science, (black) art and moving goal posts. Mart "caroloyl" wrote in message ... Hi Mart :-)) So glad you found me--had a hard time finding my post myself! I clicked "New Message" to send in my news but I guess I should have used a fresh subject line? I can't figure how these newsgroup threads work :-b Anyway, I've tried two different drivers for my sound card--the one on CD that came with it, and another I got from the Creative web site. Neither made any difference in the way it performed. At one point before I replaced the HD, the properties sheet for the sound card told me I was not authorized to make any changes! (it's allowing them now though). In view of the card's gradual performance decay and recently developed blue-screening of a variety of programs (which always happens after a series of rapid ticks, clicks, beeps or midi plays--never after just the occasional noise), I'll be very happy to have a new one. I once had a spanking new Creative CDRW that never wrote me but three CD's that could be read: I threw out over a dozen failures and lost my temper too '-) ; so in all, my experience with that brand of computer products has been VERY NOT satisfactory. After having more than my fair share of problems with new hardware, it had crossed my mind that I might have defective RAM also :-( but didn't know how to check it. I did manage to get WEFT to install perfectly right after a first boot (not a reboot) but haven't altered Windows' memory handling. I've checked out all Noel's suggestions except for the corrupted swap file, which I can't believe has happened after only a couple weeks of use! I keep all my Temp folders emptied and use Diskeeper to defrag. I reset the SysRes cache at 1095 MB (it was either that or 200 MB--no setting in between?) and its size is 604 MB, 2550 files, 5 folders. I've still got 59.9 GB of free space on C. Thanks muchly for your time and info and the link to DocMemory. I'll post back with the results. calamity carol "Mart" wrote in message ... Hi Carol, good to see that you've managed to replace and set-up your new Samsung HDD. Your 'sound' and OE problems *may or may not* have something to do with your RAM issues, but until you sort the RAM out, don't try troubleshooting too many things at once - it'll only lead to confusion g FWIW - my 'guess' is that the underlying cause of your sound card problems is more likely to be driver related - but see previous paragraph. If the card is 'pre-WinMe' you may well have problems finding the 'perfect' WinMe drivers and have to put-up with the WDM (Windows Driver Model) versions supplied on the WinMe CD (or even Win98 drivers) and live with their short-comings. Not many manufacturers were interested in writing WinMe drivers for their obsolete sound cards - Cynical? Moi?? However, you say that you have only 512 MB fitted, so the Q253912 article should not be relevant - it only applies to memory greater than 512 MB. If you think that your memory *may be* faulty, check out your memory chips using Simmtester's DocMemory from www.simmtester.com or http://www.simmtester.com/page/products/doc/docinfo.asp and create the boot disk from that - run it overnight to check the RAM. One other possibility is that you *may not* be letting Windows manage your swap-file. Confirm that there are no min/max limits set by the User. Let Windows manage it. Don't forget to defrag too g But I seem to recall Noel giving you some pointers in this direction last November. Regarding WEFT, I've no knowledge of this 'application' so I can't really help you with it. However, you should try to confirm that it is expected to run with a minimum of 512 MB from the 'minimum requirements' product specification. Again, see your previous threads for pointers from Noel and Mike etc. In view of the date of the original thread - August thru' December last year - and especially with the change of HDD and a 'clean' installation since then, it might be a good idea to start a brand new thread/topic. Keep to a single issue per topic and don't forget to include error reports. HTH and good luck Mart "caroloyl" wrote in message ... Hi there! I'm back up and running :-)) Installed and formatted the new Samsung drive myself December 30 and am still slowly installing my programs. My sound problem with OE and other programs didn't go away--not with either the new drive or fresh Me and sound-driver install--so I've ordered a new sound card. The sound has been doing other peculiar things for ages, like playing a midi in two different keys at once and "wobbling" (nope, don't have reverb)--so I'm guessing it's used up after less than three years (the life span of cheap?) But I'm really writing for help again with the subject line here because I'm still getting the "not enough memory . . ." error. I got that warning three times trying to install WEFT (MS' embedded-font making tool) before it finally completed. Never had that happen before and I've used WEFT for years--so I did a little looking around in the MS database and found this item referring to having this problem with large amounts of RAM installed (I have 512 MB): http://support.microsoft.com/support.../Q253/9/12.asp It offers two fixes of which--to me--this one, editing the Sys ini file, looks easiest since I haven't a clue what the other's about: http://support.microsoft.com/kb/108079/EN-US/ I've looked at my sys ini and there is nothing at all entered under the [VCache] section. Can specifying a maximum amount for Windows to use help me? And if so how much should I allow it? I read somewhere recently that if unlimited Windows will glom all the available RAM leaving no room for opening another platform (have I remembered that right?)--and I do believe WEFT uses a different one for installation (coarse fonts in the dialog). I've also just found an "out of memory" error in a Java log after trying unsuccessfully to download an applet (installed the latest Sun Java program a few days ago). Your help, as always, much appreciated. carol A couple of things to mention: "caroloyl" wrote in message news:... Thanks for the reassurance guys--I needed that . . . and for your time assessing this matter. I'm sure hoping this will be the end of the line for my string of problems--and I'm consoled to find once again Millennium is not to blame. carol "Mart" wrote in message ... Noel wrote:- The fact that the utility would not complete is almost certainly sufficient evidence that there are physical problems with the HD. ... etc., etc., .. I totally concur with your comments, Noel. For whatever cause - heat, mechanical, surface, etc., - Carol has a (terminally) 'sick disk' Mart |
#4
|
|||
|
|||
Mart -- Not enough memory
Hi HL, I was very pleased that you used the word "often", rather than
"always". I need not expand, save to say that I don't anticipate having any more trouble scaring the birds away whilst I still have my 'upgraded' Philips CDD3610 generic burner. g Mart "Heirloom" wrote in message ... ... I once had a spanking new Creative CDRW that never wrote me but three CD's that could be read: I threw out over a dozen failures It should be mentioned that upgrading the "firmware" will often resolve burning issues, aside from suitable media. Firmware upgrades can be had at the manufacturer's website. Myself and a friend have determined this can make the difference between burning a good CD/DVD and making coasters. Heirloom, old and think it's gonna rain "Mart" wrote in message ... Hi Carol, I await to hear the results of your DocMemory tests with interest, although I'm no longer particularly suspecting RAM issues. Regarding Diskeeper, like WEFT, I don't use it so can't comment (although several other 'regulars' on these WinMe News Groups do and report good results), I prefer to use Scandisk (and Defrag) as supplied by MS. My philosophy being that as MS 'invented' Windows, then their own maintenance utilities *ought* be adequate. My experience of certain Third Party utilities is "disappointment" - e.g. Norton (I've never touched their products since the mid 90's when they progressed?? from DOS to Windows and the 10ft bargepole took on a whole new meaning g) I tend to use almost exclusively (except AV utils) MS utilities and am still here to tell the tale. As I mentioned previously, 'older' soundcards do not sit too comfortably with WinMe and what a surprise that you mentioned Creative g. Forget using their 'bundled' (Win95/98) application software on WinMe - it won't install properly, if at all. Uninstall it (and the drivers - in Safe Mode) and just re-install their (Win98?) drivers ONLY during the reboot (Plug 'n Play) Don't expect any of the original fancy gimmicks (which you might have experienced in Win95/98) and you *might* just find that your .mid files sound reasonably good. ... I once had a spanking new Creative CDRW that never wrote me but three CD's that could be read: I threw out over a dozen failures CD-R's & CD-RW's? - Can often depend on the different 'quality' between manufactures - try a different brand. And sadly, this has also been known to apply to different brands of CD-ROM's and perhaps even more importantly, between different software houses and their versions of burning software. Not all CD-ROM's are recognised by all versions of software, nor media by the CD-ROM - a slight blurring of science, (black) art and moving goal posts. Mart "caroloyl" wrote in message ... Hi Mart :-)) So glad you found me--had a hard time finding my post myself! I clicked "New Message" to send in my news but I guess I should have used a fresh subject line? I can't figure how these newsgroup threads work :-b Anyway, I've tried two different drivers for my sound card--the one on CD that came with it, and another I got from the Creative web site. Neither made any difference in the way it performed. At one point before I replaced the HD, the properties sheet for the sound card told me I was not authorized to make any changes! (it's allowing them now though). In view of the card's gradual performance decay and recently developed blue-screening of a variety of programs (which always happens after a series of rapid ticks, clicks, beeps or midi plays--never after just the occasional noise), I'll be very happy to have a new one. I once had a spanking new Creative CDRW that never wrote me but three CD's that could be read: I threw out over a dozen failures and lost my temper too '-) ; so in all, my experience with that brand of computer products has been VERY NOT satisfactory. After having more than my fair share of problems with new hardware, it had crossed my mind that I might have defective RAM also :-( but didn't know how to check it. I did manage to get WEFT to install perfectly right after a first boot (not a reboot) but haven't altered Windows' memory handling. I've checked out all Noel's suggestions except for the corrupted swap file, which I can't believe has happened after only a couple weeks of use! I keep all my Temp folders emptied and use Diskeeper to defrag. I reset the SysRes cache at 1095 MB (it was either that or 200 MB--no setting in between?) and its size is 604 MB, 2550 files, 5 folders. I've still got 59.9 GB of free space on C. Thanks muchly for your time and info and the link to DocMemory. I'll post back with the results. calamity carol "Mart" wrote in message ... Hi Carol, good to see that you've managed to replace and set-up your new Samsung HDD. Your 'sound' and OE problems *may or may not* have something to do with your RAM issues, but until you sort the RAM out, don't try troubleshooting too many things at once - it'll only lead to confusion g FWIW - my 'guess' is that the underlying cause of your sound card problems is more likely to be driver related - but see previous paragraph. If the card is 'pre-WinMe' you may well have problems finding the 'perfect' WinMe drivers and have to put-up with the WDM (Windows Driver Model) versions supplied on the WinMe CD (or even Win98 drivers) and live with their short-comings. Not many manufacturers were interested in writing WinMe drivers for their obsolete sound cards - Cynical? Moi?? However, you say that you have only 512 MB fitted, so the Q253912 article should not be relevant - it only applies to memory greater than 512 MB. If you think that your memory *may be* faulty, check out your memory chips using Simmtester's DocMemory from www.simmtester.com or http://www.simmtester.com/page/products/doc/docinfo.asp and create the boot disk from that - run it overnight to check the RAM. One other possibility is that you *may not* be letting Windows manage your swap-file. Confirm that there are no min/max limits set by the User. Let Windows manage it. Don't forget to defrag too g But I seem to recall Noel giving you some pointers in this direction last November. Regarding WEFT, I've no knowledge of this 'application' so I can't really help you with it. However, you should try to confirm that it is expected to run with a minimum of 512 MB from the 'minimum requirements' product specification. Again, see your previous threads for pointers from Noel and Mike etc. In view of the date of the original thread - August thru' December last year - and especially with the change of HDD and a 'clean' installation since then, it might be a good idea to start a brand new thread/topic. Keep to a single issue per topic and don't forget to include error reports. HTH and good luck Mart "caroloyl" wrote in message ... Hi there! I'm back up and running :-)) Installed and formatted the new Samsung drive myself December 30 and am still slowly installing my programs. My sound problem with OE and other programs didn't go away--not with either the new drive or fresh Me and sound-driver install--so I've ordered a new sound card. The sound has been doing other peculiar things for ages, like playing a midi in two different keys at once and "wobbling" (nope, don't have reverb)--so I'm guessing it's used up after less than three years (the life span of cheap?) But I'm really writing for help again with the subject line here because I'm still getting the "not enough memory . . ." error. I got that warning three times trying to install WEFT (MS' embedded-font making tool) before it finally completed. Never had that happen before and I've used WEFT for years--so I did a little looking around in the MS database and found this item referring to having this problem with large amounts of RAM installed (I have 512 MB): http://support.microsoft.com/support.../Q253/9/12.asp It offers two fixes of which--to me--this one, editing the Sys ini file, looks easiest since I haven't a clue what the other's about: http://support.microsoft.com/kb/108079/EN-US/ I've looked at my sys ini and there is nothing at all entered under the [VCache] section. Can specifying a maximum amount for Windows to use help me? And if so how much should I allow it? I read somewhere recently that if unlimited Windows will glom all the available RAM leaving no room for opening another platform (have I remembered that right?)--and I do believe WEFT uses a different one for installation (coarse fonts in the dialog). I've also just found an "out of memory" error in a Java log after trying unsuccessfully to download an applet (installed the latest Sun Java program a few days ago). Your help, as always, much appreciated. carol A couple of things to mention: "caroloyl" wrote in message news:... Thanks for the reassurance guys--I needed that . . . and for your time assessing this matter. I'm sure hoping this will be the end of the line for my string of problems--and I'm consoled to find once again Millennium is not to blame. carol "Mart" wrote in message ... Noel wrote:- The fact that the utility would not complete is almost certainly sufficient evidence that there are physical problems with the HD. ... etc., etc., .. I totally concur with your comments, Noel. For whatever cause - heat, mechanical, surface, etc., - Carol has a (terminally) 'sick disk' Mart |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mart - "not enough free memory to run this program" | caroloyl | General | 1 | January 18th 06 11:10 AM |
Mart - "not enough free memory to run this program" | caroloyl | General | 13 | December 2nd 05 10:30 PM |
DBMS problem: MS-DOS window vs. MS-DOS mode | Alan Seltzer | General | 4 | November 4th 05 10:49 PM |
RAM | Iqbal | Software & Applications | 22 | July 24th 04 09:04 AM |
Please help! Display settings !! | Mitzi | Monitors & Displays | 12 | July 11th 04 05:19 AM |