If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#91
|
|||
|
|||
Won't load OS
ms wrote in :
"Ben Myers" wrote in : snip This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? ms |
#92
|
|||
|
|||
Won't load OS
ms wrote in :
"Ben Myers" wrote in : snip This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? ms |
#93
|
|||
|
|||
Won't load OS
ms wrote in :
ms wrote in : "Ben Myers" wrote in : snip This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? ms Using a boot disk, in windows folder, I deleted DBLBUFF.sys and IFSHLP.sys . Now in DIR, I don't see them. But it still shuts down before windows starts. BTW, since the original problem, in a DOS screen, in C\Windows are a USER BAD, and SYSTEM BAD folders. ms |
#94
|
|||
|
|||
Won't load OS
ms wrote in :
ms wrote in : "Ben Myers" wrote in : snip This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? ms Using a boot disk, in windows folder, I deleted DBLBUFF.sys and IFSHLP.sys . Now in DIR, I don't see them. But it still shuts down before windows starts. BTW, since the original problem, in a DOS screen, in C\Windows are a USER BAD, and SYSTEM BAD folders. ms |
#95
|
|||
|
|||
Won't load OS
ms wrote in :
This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? Using a boot disk, in windows folder, I deleted DBLBUFF.sys and IFSHLP.sys . Now in DIR, I don't see them. But it still shuts down before windows starts. BTW, since the original problem, in a DOS screen, in C\Windows are a USER BAD, and SYSTEM BAD folders. Windows 98 needs "c:\windows\dblbuff.sys" and "c:\windows\ifshlp.sys", so I would put them back. Also, try extracting a fresh copy of "c:\windows\wininit.exe" from your Windows 98 CD. If this doesn't help, try tapping the F8 key during bootup and selecting "Step by step confirmation". This may help to determine what is causing the shutdown. Ben |
#96
|
|||
|
|||
Won't load OS
ms wrote in :
This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? Using a boot disk, in windows folder, I deleted DBLBUFF.sys and IFSHLP.sys . Now in DIR, I don't see them. But it still shuts down before windows starts. BTW, since the original problem, in a DOS screen, in C\Windows are a USER BAD, and SYSTEM BAD folders. Windows 98 needs "c:\windows\dblbuff.sys" and "c:\windows\ifshlp.sys", so I would put them back. Also, try extracting a fresh copy of "c:\windows\wininit.exe" from your Windows 98 CD. If this doesn't help, try tapping the F8 key during bootup and selecting "Step by step confirmation". This may help to determine what is causing the shutdown. Ben |
#97
|
|||
|
|||
Won't load OS
"Ben Myers" wrote in
: ms wrote in : This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? Using a boot disk, in windows folder, I deleted DBLBUFF.sys and IFSHLP.sys . Now in DIR, I don't see them. But it still shuts down before windows starts. BTW, since the original problem, in a DOS screen, in C\Windows are a USER BAD, and SYSTEM BAD folders. Windows 98 needs "c:\windows\dblbuff.sys" and "c:\windows \ifshlp.sys", so I would put them back. Also, try extracting a fresh copy of "c:\windows\wininit.exe" from your Windows 98 CD. If this doesn't help, try tapping the F8 key during bootup and selecting "Step by step confirmation". This may help to determine what is causing the shutdown. Ben I got into a new world- trying to find wininit.exe in which cab file. I am looking in my W2K folder at the W98 OS CD, using a cab file utility with no luck, browsed for finding it, see a W95 answer. Do you have a clue as to which cab file has this file? ms |
#98
|
|||
|
|||
Won't load OS
"Ben Myers" wrote in
: ms wrote in : This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? Using a boot disk, in windows folder, I deleted DBLBUFF.sys and IFSHLP.sys . Now in DIR, I don't see them. But it still shuts down before windows starts. BTW, since the original problem, in a DOS screen, in C\Windows are a USER BAD, and SYSTEM BAD folders. Windows 98 needs "c:\windows\dblbuff.sys" and "c:\windows \ifshlp.sys", so I would put them back. Also, try extracting a fresh copy of "c:\windows\wininit.exe" from your Windows 98 CD. If this doesn't help, try tapping the F8 key during bootup and selecting "Step by step confirmation". This may help to determine what is causing the shutdown. Ben I got into a new world- trying to find wininit.exe in which cab file. I am looking in my W2K folder at the W98 OS CD, using a cab file utility with no luck, browsed for finding it, see a W95 answer. Do you have a clue as to which cab file has this file? ms |
#99
|
|||
|
|||
Won't load OS
"ms" wrote in message ...
"Ben Myers" wrote in : ms wrote in : This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? Using a boot disk, in windows folder, I deleted DBLBUFF.sys and IFSHLP.sys . Now in DIR, I don't see them. But it still shuts down before windows starts. BTW, since the original problem, in a DOS screen, in C\Windows are a USER BAD, and SYSTEM BAD folders. Windows 98 needs "c:\windows\dblbuff.sys" and "c:\windows \ifshlp.sys", so I would put them back. Also, try extracting a fresh copy of "c:\windows\wininit.exe" from your Windows 98 CD. If this doesn't help, try tapping the F8 key during bootup and selecting "Step by step confirmation". This may help to determine what is causing the shutdown. I got into a new world- trying to find wininit.exe in which cab file. I am looking in my W2K folder at the W98 OS CD, using a cab file utility with no luck, browsed for finding it, see a W95 answer. Do you have a clue as to which cab file has this file? Windows 98 Win98_43.cab Windows 98 SE Win98_47.cab Ben |
#100
|
|||
|
|||
Won't load OS
"ms" wrote in message ...
"Ben Myers" wrote in : ms wrote in : This next sentence was supposed to be "thanks much," and close this long thread. But what I did with DBLBUFF.sys and IFSHLP.sys caused this: in the initial DOS W98 Start Menu screen, I usually enter to avoid the 8 seconds wait I had set up. and then windows starts normally. (Now) I enter, a short message flashes, and the computer shuts off. No fun. What next to do? Using a boot disk, in windows folder, I deleted DBLBUFF.sys and IFSHLP.sys . Now in DIR, I don't see them. But it still shuts down before windows starts. BTW, since the original problem, in a DOS screen, in C\Windows are a USER BAD, and SYSTEM BAD folders. Windows 98 needs "c:\windows\dblbuff.sys" and "c:\windows \ifshlp.sys", so I would put them back. Also, try extracting a fresh copy of "c:\windows\wininit.exe" from your Windows 98 CD. If this doesn't help, try tapping the F8 key during bootup and selecting "Step by step confirmation". This may help to determine what is causing the shutdown. I got into a new world- trying to find wininit.exe in which cab file. I am looking in my W2K folder at the W98 OS CD, using a cab file utility with no luck, browsed for finding it, see a W95 answer. Do you have a clue as to which cab file has this file? Windows 98 Win98_43.cab Windows 98 SE Win98_47.cab Ben |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cant load only one particular website! | OhWowMan | Internet | 4 | May 8th 05 11:59 PM |
how do you re-load 98 | Brothersid | Setup & Installation | 4 | March 6th 05 06:06 PM |
MSPaint will not load | BobB | Software & Applications | 1 | October 3rd 04 07:25 PM |
me will not load | Matthew Hutrchings | Setup & Installation | 1 | August 24th 04 07:00 PM |
failure to load | vince russell | Software & Applications | 5 | July 31st 04 02:53 PM |