If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help trying to share printer on ME with my XP machine??
Hello Group: here is the setup as best as I can describe:
DSL into Lynksys router which feeds both machines. Both reach the internet fine. I've told the ME machine to "share the printer (no password) The XP machine is my machine upstairs and the downstairs machine which is named :"Downstairs" is for mom. Printer is downstairs for mom. The ME machine just replaced an old old machine running NT were I could get to the printer from XP okay. The XP computer can see "Downstairs" in Workgroup from My Network Places Entire Network Microsoft Windows Network Worgroup Downstairs but thats as far as it gets. Double clicking on Downstairs yields This message: //Downstairs is not accessible. You might not have permission to access this network resource. The network path was not found. Since it sees Downstairs then this would presumably leave an access problem of some sort. I will furthur note that I can turn on file sharing on XP and can see that both from XP and from downstairs and it is accessible from downstairts. Printer is an HP LaserJet 4. The Share name I gave it was "HPLJ4". Any ideas out there I'd appreciate hearing them! Thanks Much, Dallas... -- Home Page: www.geocities.com/d_overturf |
#2
|
|||
|
|||
I will additionally note on this problem that neither computer seems to be
able to ping the other and they are able to ping themselves (the pings all timeout and are pinging the correct ip address) Also just ran into article KB177078 on here and created IRPStackSize in the Registry (find did not find one) set to 32 to my XP Home machine. No change in behaviour that I can see. I still can't see the shared printer but can see the name "Downstairs" listed in Workgroup in My Network Places. I will note that this ME Computer came with Norton AV installed. one of the first things I did was uninstall it. As I don't care for it. So I don't know what version it was. I do not see any indication that the IRPStackSize mod should be done on the ME machine; so I have not done so; I hope that is correct. Any Ideas Welcome! Thanks Much, Dallas... -- Email: Or Home Page: www.geocities.com/d_overturf "Dallas Overturf" wrote in message ... Hello Group: here is the setup as best as I can describe: DSL into Lynksys router which feeds both machines. Both reach the internet fine. I've told the ME machine to "share the printer (no password) The XP machine is my machine upstairs and the downstairs machine which is named :"Downstairs" is for mom. Printer is downstairs for mom. The ME machine just replaced an old old machine running NT were I could get to the printer from XP okay. The XP computer can see "Downstairs" in Workgroup from My Network Places Entire Network Microsoft Windows Network Worgroup Downstairs but thats as far as it gets. Double clicking on Downstairs yields This message: //Downstairs is not accessible. You might not have permission to access this network resource. The network path was not found. Since it sees Downstairs then this would presumably leave an access problem of some sort. I will furthur note that I can turn on file sharing on XP and can see that both from XP and from downstairs and it is accessible from downstairts. Printer is an HP LaserJet 4. The Share name I gave it was "HPLJ4". Any ideas out there I'd appreciate hearing them! Thanks Much, Dallas... -- Home Page: www.geocities.com/d_overturf |
#3
|
|||
|
|||
In case it helps anyone: the resolution to this was to enable the two
machines through their firewalls. If you run a firewall such as Trend or Sygate (which my two machines were) you need to do this. I was suprised by it as my IP addrs had not changed and my upstairs computer had not changed. Sygate had been reloaded into the new downstairs computer now running ME. I don't get why the prior downstairs running NT could ping upstairs (never changed upstairs!) but all is working as expected now. Regards to all, Dallas... -- Email: Or Home Page: www.geocities.com/d_overturf "Dallas Overturf" wrote in message ... I will additionally note on this problem that neither computer seems to be able to ping the other and they are able to ping themselves (the pings all timeout and are pinging the correct ip address) Also just ran into article KB177078 on here and created IRPStackSize in the Registry (find did not find one) set to 32 to my XP Home machine. No change in behaviour that I can see. I still can't see the shared printer but can see the name "Downstairs" listed in Workgroup in My Network Places. I will note that this ME Computer came with Norton AV installed. one of the first things I did was uninstall it. As I don't care for it. So I don't know what version it was. I do not see any indication that the IRPStackSize mod should be done on the ME machine; so I have not done so; I hope that is correct. Any Ideas Welcome! Thanks Much, Dallas... -- Email: Or Home Page: www.geocities.com/d_overturf "Dallas Overturf" wrote in message ... Hello Group: here is the setup as best as I can describe: DSL into Lynksys router which feeds both machines. Both reach the internet fine. I've told the ME machine to "share the printer (no password) The XP machine is my machine upstairs and the downstairs machine which is named :"Downstairs" is for mom. Printer is downstairs for mom. The ME machine just replaced an old old machine running NT were I could get to the printer from XP okay. The XP computer can see "Downstairs" in Workgroup from My Network Places Entire Network Microsoft Windows Network Worgroup Downstairs but thats as far as it gets. Double clicking on Downstairs yields This message: //Downstairs is not accessible. You might not have permission to access this network resource. The network path was not found. Since it sees Downstairs then this would presumably leave an access problem of some sort. I will furthur note that I can turn on file sharing on XP and can see that both from XP and from downstairs and it is accessible from downstairts. Printer is an HP LaserJet 4. The Share name I gave it was "HPLJ4". Any ideas out there I'd appreciate hearing them! Thanks Much, Dallas... -- Home Page: www.geocities.com/d_overturf |
#4
|
|||
|
|||
"Sygate had been reloaded" says it all - you had to retrain it to your local
situation. -- Noel Paton (MS-MVP 2002-2005, Windows) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "Dallas Overturf" wrote in message ... In case it helps anyone: the resolution to this was to enable the two machines through their firewalls. If you run a firewall such as Trend or Sygate (which my two machines were) you need to do this. I was suprised by it as my IP addrs had not changed and my upstairs computer had not changed. Sygate had been reloaded into the new downstairs computer now running ME. I don't get why the prior downstairs running NT could ping upstairs (never changed upstairs!) but all is working as expected now. Regards to all, Dallas... -- Email: Or Home Page: www.geocities.com/d_overturf "Dallas Overturf" wrote in message ... I will additionally note on this problem that neither computer seems to be able to ping the other and they are able to ping themselves (the pings all timeout and are pinging the correct ip address) Also just ran into article KB177078 on here and created IRPStackSize in the Registry (find did not find one) set to 32 to my XP Home machine. No change in behaviour that I can see. I still can't see the shared printer but can see the name "Downstairs" listed in Workgroup in My Network Places. I will note that this ME Computer came with Norton AV installed. one of the first things I did was uninstall it. As I don't care for it. So I don't know what version it was. I do not see any indication that the IRPStackSize mod should be done on the ME machine; so I have not done so; I hope that is correct. Any Ideas Welcome! Thanks Much, Dallas... -- Email: Or Home Page: www.geocities.com/d_overturf "Dallas Overturf" wrote in message ... Hello Group: here is the setup as best as I can describe: DSL into Lynksys router which feeds both machines. Both reach the internet fine. I've told the ME machine to "share the printer (no password) The XP machine is my machine upstairs and the downstairs machine which is named :"Downstairs" is for mom. Printer is downstairs for mom. The ME machine just replaced an old old machine running NT were I could get to the printer from XP okay. The XP computer can see "Downstairs" in Workgroup from My Network Places Entire Network Microsoft Windows Network Worgroup Downstairs but thats as far as it gets. Double clicking on Downstairs yields This message: //Downstairs is not accessible. You might not have permission to access this network resource. The network path was not found. Since it sees Downstairs then this would presumably leave an access problem of some sort. I will furthur note that I can turn on file sharing on XP and can see that both from XP and from downstairs and it is accessible from downstairts. Printer is an HP LaserJet 4. The Share name I gave it was "HPLJ4". Any ideas out there I'd appreciate hearing them! Thanks Much, Dallas... -- Home Page: www.geocities.com/d_overturf |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I can't connect to my shared printer on my Windows 98 SE machine | Martin Healy | Printing | 2 | July 7th 05 07:55 PM |
Can't connect to my network printer | Martin Healy | Networking | 8 | July 6th 05 10:35 PM |
Printer Share II | j. galloway | Networking | 4 | January 28th 05 10:29 PM |
Printer Share | j. galloway | Networking | 20 | January 27th 05 01:31 PM |
share a printer on WIN98 | Blair | Networking | 5 | June 1st 04 05:43 PM |