If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Both D & E
Windows ME My cdrw & dvd both will not run ,System will
not detect them ? What to do ? |
#2
|
|||
|
|||
Both D & E
What do you see under CD-ROM devices and IDE controllers in the Device
Manager? [Control Panel | System | Device Manager]. -- Mike Maltby MS-MVP jlh8450 wrote: Windows ME My cdrw & dvd both will not run ,System will not detect them ? What to do ? |
#3
|
|||
|
|||
Both D & E
I had problems with my computer not detecting my cdrom.I
heard that it will not run as a slave.I checked in my bios setup and sure enough,it was under secondary slave.I changed it to secondary master and changed slave to not installed.It now works fine. -----Original Message----- What do you see under CD-ROM devices and IDE controllers in the Device Manager? [Control Panel | System | Device Manager]. -- Mike Maltby MS-MVP jlh8450 wrote: Windows ME My cdrw & dvd both will not run ,System will not detect them ? What to do ? . |
#4
|
|||
|
|||
Both D & E
Hi there,
I have been having the same problem my CD-ROM drive not working after installing WindowsME. It is listed in my Bios setup, how did you go about changing it to a secondary master or for that fact know it was under secondary slave? I have gotten a lot of confusing advice in postings. Hope you can help thanks Shelly -----Original Message----- I had problems with my computer not detecting my cdrom.I heard that it will not run as a slave.I checked in my bios setup and sure enough,it was under secondary slave.I changed it to secondary master and changed slave to not installed.It now works fine. |
#5
|
|||
|
|||
Both D & E
Shelly,
You've been told again and again that your problem is due to your secondary controller not being configured correctly. That you choose to ignore that advice or don't understand what you have been told doesn't mean that it is either incorrect or confusing. You've also been advised to seek professional technical help since you seem unwilling or unable to follow the suggestions that have been repeatedly posted here over the last week. -- Mike Maltby MS-MVP shelly wrote: Hi there, I have been having the same problem my CD-ROM drive not working after installing WindowsME. It is listed in my Bios setup, how did you go about changing it to a secondary master or for that fact know it was under secondary slave? I have gotten a lot of confusing advice in postings. Hope you can help thanks |
#6
|
|||
|
|||
Both D & E
Well Mike you're right you have given me advice and I have
followed most of the advice. But he said he was able to change it from his Secondary to his master and that's what I was asking how he did it. I wasn't ignoring your help or advice or anyone else's. I have tried just about all the advice on here that I was able to do or understand. And obviously I'm not the only one having a problem since there has been three or four other postings with the same issue. I appreciate your help and everyone's help. -----Original Message----- Shelly, You've been told again and again that your problem is due to your secondary controller not being configured correctly. That you choose to ignore that advice or don't understand what you have been told doesn't mean that it is either incorrect or confusing. You've also been advised to seek professional technical help since you seem unwilling or unable to follow the suggestions that have been repeatedly posted here over the last week. -- Mike Maltby MS-MVP |
#7
|
|||
|
|||
Both D & E
-----Original Message----- I had problems with my computer not detecting my cdrom.I heard that it will not run as a slave.I checked in my bios setup and sure enough,it was under secondary slave.I changed it to secondary master and changed slave to not installed.It now works fine. -----Original Message----- What do you see under CD-ROM devices and IDE controllers in the Device Manager? [Control Panel | System | Device Manager]. -- Mike Maltby MS-MVP jlh8450 wrote: Windows ME My cdrw & dvd both will not run ,System will not detect them ? What to do ? .I have the same problem, no cd rom anymore, can someone advise me. I checked my bios and sec master, and sec slave shows cd rom, but I get atapi incompatible, what gives I had both sometime ago.. Al . |
Thread Tools | |
Display Modes | |
|
|