If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
slow (15Min) startup
I am running a P3 600 mhz computer with 512 MB ram with
Windows98SE. It has been running fine for 4 years. Last weekend I installed Diskeeper 8.0 Pro and started having 15 MIn. startup times. Computer runs nomal speed up to the point I log in and then it hangs up and takes 10 min, to get to the desktop. I have uninstalled diskeeper and removed its lines from the autoexc,bat and startup.ini but this did not help. Diskeeper tech support could not help (had them up to level 2 before they told me to contact Microsoft). While starting up I found "mprexe" and "msgsrv32" listed in the program list as "not responding". tried to use msconfig to resolve but start up still slow regardless of which files were truned on or off. NOTE: computer will start up normal in safe mode. I have installed Win98 on top of its self to replace missing files or "dll" but this did not help. Is there anything I can try before I drop the partisions and rebuild from scrach |
#2
|
|||
|
|||
slow (15Min) startup
Hi Jeff
Have you tried scandisk and defrag to clear any files errors? Also have you considered keeping upto date with MS last updates for WIN98? Q: Why did you install Diskeeper? Cheers Chris Jeff Jones wrote: I am running a P3 600 mhz computer with 512 MB ram with Windows98SE. It has been running fine for 4 years. Last weekend I installed Diskeeper 8.0 Pro and started having 15 MIn. startup times. Computer runs nomal speed up to the point I log in and then it hangs up and takes 10 min, to get to the desktop. I have uninstalled diskeeper and removed its lines from the autoexc,bat and startup.ini but this did not help. Diskeeper tech support could not help (had them up to level 2 before they told me to contact Microsoft). While starting up I found "mprexe" and "msgsrv32" listed in the program list as "not responding". tried to use msconfig to resolve but start up still slow regardless of which files were truned on or off. NOTE: computer will start up normal in safe mode. I have installed Win98 on top of its self to replace missing files or "dll" but this did not help. Is there anything I can try before I drop the partisions and rebuild from scrach |
#3
|
|||
|
|||
slow (15Min) startup
Troubleshooting Windows 98 Startup Problems
http://support.microsoft.com/?kbid=188867 How to Perform Clean-Boot Troubleshooting for Windows 98 http://support.microsoft.com/?kbid=192926 -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "Jeff Jones" wrote in message ... I am running a P3 600 mhz computer with 512 MB ram with Windows98SE. It has been running fine for 4 years. Last weekend I installed Diskeeper 8.0 Pro and started having 15 MIn. startup times. Computer runs nomal speed up to the point I log in and then it hangs up and takes 10 min, to get to the desktop. I have uninstalled diskeeper and removed its lines from the autoexc,bat and startup.ini but this did not help. Diskeeper tech support could not help (had them up to level 2 before they told me to contact Microsoft). While starting up I found "mprexe" and "msgsrv32" listed in the program list as "not responding". tried to use msconfig to resolve but start up still slow regardless of which files were truned on or off. NOTE: computer will start up normal in safe mode. I have installed Win98 on top of its self to replace missing files or "dll" but this did not help. Is there anything I can try before I drop the partisions and rebuild from scrach |
#4
|
|||
|
|||
slow (15Min) startup
HI Chis, thanks for the help. Yes I have tried scandisk
and ran defrag. no help. I also have found that my "ctrl+c" for copy and "ctrl+v" for paste functions do not work. I have all the latest Microsoft updates. if you have any ideas i am at a loss. Jeff Jones -----Original Message----- Hi Jeff Have you tried scandisk and defrag to clear any files errors? Also have you considered keeping upto date with MS last updates for WIN98? Q: Why did you install Diskeeper? Cheers Chris Jeff Jones wrote: I am running a P3 600 mhz computer with 512 MB ram with Windows98SE. It has been running fine for 4 years. Last weekend I installed Diskeeper 8.0 Pro and started having 15 MIn. startup times. Computer runs nomal speed up to the point I log in and then it hangs up and takes 10 min, to get to the desktop. I have uninstalled diskeeper and removed its lines from the autoexc,bat and startup.ini but this did not help. Diskeeper tech support could not help (had them up to level 2 before they told me to contact Microsoft). While starting up I found "mprexe" and "msgsrv32" listed in the program list as "not responding". tried to use msconfig to resolve but start up still slow regardless of which files were truned on or off. NOTE: computer will start up normal in safe mode. I have installed Win98 on top of its self to replace missing files or "dll" but this did not help. Is there anything I can try before I drop the partisions and rebuild from scrach . |
#5
|
|||
|
|||
slow (15Min) startup
Ron,
Thanks for the help. I ran both of these without help. I remove all files for startup and still takes about 15 min. to complete. I have also found that "ctrl+C" for copy and "ctrl+V" for paste do not work either. Jeff JOnes -----Original Message----- Troubleshooting Windows 98 Startup Problems http://support.microsoft.com/?kbid=188867 How to Perform Clean-Boot Troubleshooting for Windows 98 http://support.microsoft.com/?kbid=192926 -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "Jeff Jones" wrote in message ... I am running a P3 600 mhz computer with 512 MB ram with Windows98SE. It has been running fine for 4 years. Last weekend I installed Diskeeper 8.0 Pro and started having 15 MIn. startup times. Computer runs nomal speed up to the point I log in and then it hangs up and takes 10 min, to get to the desktop. I have uninstalled diskeeper and removed its lines from the autoexc,bat and startup.ini but this did not help. Diskeeper tech support could not help (had them up to level 2 before they told me to contact Microsoft). While starting up I found "mprexe" and "msgsrv32" listed in the program list as "not responding". tried to use msconfig to resolve but start up still slow regardless of which files were truned on or off. NOTE: computer will start up normal in safe mode. I have installed Win98 on top of its self to replace missing files or "dll" but this did not help. Is there anything I can try before I drop the partisions and rebuild from scrach . |
#6
|
|||
|
|||
slow (15Min) startup
Do you boot your computer each day or do you leave it on? If you don't boot
each day: If this problem is less than five days old, restore a copy of the registry that predates the onset of the problem and see if that helps. The five-day limit assumes that the computer is booted every day. If it is not booted every day, you may have an old enough registry backup that you can use even though more than five days have elapsed. Any registry changes made after the date of the restored registry will be lost. On the Start Menu, select Shut Down and Restart in MSDOS Mode. At the Windows prompt, type: scanreg /restore and hit enter. Once the registry restore screen appears, select the date of the registry that you wish to restore by highlighting it and then click enter. If you see a registry named: Rbbad.cab, that is a copy of the registry that has already been replaced. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo wrote in message ... Ron, Thanks for the help. I ran both of these without help. I remove all files for startup and still takes about 15 min. to complete. I have also found that "ctrl+C" for copy and "ctrl+V" for paste do not work either. Jeff JOnes -----Original Message----- Troubleshooting Windows 98 Startup Problems http://support.microsoft.com/?kbid=188867 How to Perform Clean-Boot Troubleshooting for Windows 98 http://support.microsoft.com/?kbid=192926 -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "Jeff Jones" wrote in message ... I am running a P3 600 mhz computer with 512 MB ram with Windows98SE. It has been running fine for 4 years. Last weekend I installed Diskeeper 8.0 Pro and started having 15 MIn. startup times. Computer runs nomal speed up to the point I log in and then it hangs up and takes 10 min, to get to the desktop. I have uninstalled diskeeper and removed its lines from the autoexc,bat and startup.ini but this did not help. Diskeeper tech support could not help (had them up to level 2 before they told me to contact Microsoft). While starting up I found "mprexe" and "msgsrv32" listed in the program list as "not responding". tried to use msconfig to resolve but start up still slow regardless of which files were truned on or off. NOTE: computer will start up normal in safe mode. I have installed Win98 on top of its self to replace missing files or "dll" but this did not help. Is there anything I can try before I drop the partisions and rebuild from scrach . |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
new items on startup | W J Malsbury | General | 14 | August 5th 04 12:26 PM |
Startup Problem For Multiple Users | Mike Dalton | General | 0 | July 15th 04 05:14 PM |
Boot order of applications | JohnB | General | 2 | July 10th 04 12:16 PM |
Permanent Removal of Startup Items from Listing | HKEK | General | 5 | June 13th 04 07:35 PM |
slow startup | Mike | Improving Performance | 0 | May 16th 04 07:09 PM |