If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Internet connection with ethernet
I installed a ethernet adapter to my Win 98.I was told it would not work
unless I have a 98SE system. Is this correct and how do I find out if I have FE or SE. THanks -- daniel |
#2
|
|||
|
|||
Internet connection with ethernet
1. Right-click My Computer and then Properties (or go to Control
PanelSystem). On the General tab it will tell you which version you have. 2. It's very difficult to offer detailed advice based upon essentially no details. How about you tell us what make/model Ethernet adapter you installed? T'would make researching your issue SO much easier, s. Even if it turns out that you have the original flavor of Win98, there are still a few LAN cards out there with the drivers, or people with the drivers to share. Even if the manufacturer stopped providing them, they still work. -- Gary S. Terhune MS-MVP Shell/User http://grystmill.com "larry" wrote in message ... I installed a ethernet adapter to my Win 98.I was told it would not work unless I have a 98SE system. Is this correct and how do I find out if I have FE or SE. THanks -- daniel |
#3
|
|||
|
|||
Internet connection with ethernet
I do have the original win98. The ethernet model I purchased is Trendnet
10/100mbps fast Ethernet PCI Adapter TE100-PCIWN. We are trying to connect to high speed internet. daniel "Gary S. Terhune" wrote: 1. Right-click My Computer and then Properties (or go to Control PanelSystem). On the General tab it will tell you which version you have. 2. It's very difficult to offer detailed advice based upon essentially no details. How about you tell us what make/model Ethernet adapter you installed? T'would make researching your issue SO much easier, s. Even if it turns out that you have the original flavor of Win98, there are still a few LAN cards out there with the drivers, or people with the drivers to share. Even if the manufacturer stopped providing them, they still work. -- Gary S. Terhune MS-MVP Shell/User http://grystmill.com "larry" wrote in message ... I installed a ethernet adapter to my Win 98.I was told it would not work unless I have a 98SE system. Is this correct and how do I find out if I have FE or SE. THanks -- daniel |
#4
|
|||
|
|||
Internet connection with ethernet
"larry" wrote: I do have the original win98. The ethernet model I purchased is Trendnet 10/100mbps fast Ethernet PCI Adapter TE100-PCIWN. We are trying to connect to high speed internet. The next question is: Do you have the drivers, or did you just plug it in and hope that Windows already had a driver for it? In case you 're wondering.... http://trendnet.com/downloads/list_s...UBTYPE_ID=1109 The link for version "V2.x R" has a driver package with listings for Linux, DOS, Netware, Win95a, Win95b, Win98, WinNT, WinME, WinXP... I'm sure one of them will work. The link for version "A" even lists Win3.11 ! |
#5
|
|||
|
|||
Internet connection with ethernet
A cd driver was supplied with the ethernet adapter. We are now trying to
remove our old dial up server to our new internet provider with no luck. We are at a loss as to what to do next. -- daniel "MasterBlaster" wrote: "larry" wrote: I do have the original win98. The ethernet model I purchased is Trendnet 10/100mbps fast Ethernet PCI Adapter TE100-PCIWN. We are trying to connect to high speed internet. The next question is: Do you have the drivers, or did you just plug it in and hope that Windows already had a driver for it? In case you 're wondering.... http://trendnet.com/downloads/list_s...UBTYPE_ID=1109 The link for version "V2.x R" has a driver package with listings for Linux, DOS, Netware, Win95a, Win95b, Win98, WinNT, WinME, WinXP... I'm sure one of them will work. The link for version "A" even lists Win3.11 ! |
#6
|
|||
|
|||
Internet connection with ethernet
"larry" wrote: A cd driver was supplied with the ethernet adapter. We are now trying to remove our old dial up server to our new internet provider with no luck. We are at a loss as to what to do next. Okay, it's been a week. Time for a quick recap, and some more questions... I installed a ethernet adapter to my Win 98.I was told it would not work unless I have a 98SE system. We forgot to ask... WHO told you it wouldn't work, a person, the box in came in, or the driver installation program when you tried to run it? I do have the original win98. The ethernet model I purchased is Trendnet 10/100mbps fast Ethernet PCI Adapter TE100-PCIWN. We are trying to connect to high speed internet. So you're connected only by dialup now? A cd driver was supplied with the ethernet adapter. We are now trying to remove our old dial up server to our new internet provider with no luck. We are at a loss as to what to do next. And even more questions... Did you get the ethernet card fully installed? Meaning; did Windows recognize the card (via the "New Hardware Found" popup box), ask for the driver disk, and install the appropriate drivers off the CD? If you click Start, Settings, Control Panel, double-click System, click Device Manager, double-click Network Adapters, then double-click the name of the Trendnet adapter, does the first page say "This device is working properly"? Back in Control Panel, double-click Network. Is the name of the adapter listed (with a tiny green picture of a card just to the left of it), and farther down is there at least a "TCP/IP" listing with the adapter name beside it too? If the card and TCP/IP is listed, click the TCP/IP line and then Properties. On various tabs you should see "Obtain an IP adddress automatically", "Disable WINS configuration", and "Disable DNS". If all that looks normal then back in Control Panel, double-click Internet Options, and click Connections. This is where you tell the system how you want it to connect to the Internet. In reverse order: * Always dial my default connection. This means "Always use the dialup number listed in the above box". * Dial whenever a network connection is not available. "Only use dialup if the ethernet adapter can't connect". * Never dial a connection. "Ignore the silly dialup numbers. Only try to use the ethernet adapter". - This is the setting I use, though on the very rare occasion that my high-speed is down, I can switch to one of the other options, have my modem take over, and experience the wonderfully sloooooooooooow world of dialup again. I think that's enough to thoroughly confuse you for a while. Your turn. :-) |
#7
|
|||
|
|||
Internet connection with ethernet
I have a PC with 98 and I have purchased high speed internet service with
AT&T and their external modem; however, when I called in to tech support they said that 98 does not support high speed internet so I would need to get a newer operating system or a new PC. Can you advise if there is a way to make 98 work? "larry" wrote: I installed a ethernet adapter to my Win 98.I was told it would not work unless I have a 98SE system. Is this correct and how do I find out if I have FE or SE. THanks -- daniel |
#8
|
|||
|
|||
Internet connection with ethernet
On Fri, 27 Feb 2009 15:47:01 -0800, Aleshia
wrote: I installed a ethernet adapter to my Win 98.I was told it would not work unless I have a 98SE system. Is this correct and how do I find out if I have FE or SE. THanks Go to Start Settings Control Panel System. If the computer has Windows 98 Second Edition, it will say so, near the top of the window, under "System:". I have a PC with 98 and I have purchased high speed internet service with AT&T and their external modem; however, when I called in to tech support they said that 98 does not support high speed internet so I would need to get a newer operating system or a new PC. Can you advise if there is a way to make 98 work? If the AT&T modem only has a USB output, it probably won't work with Windows 98. If it has an Ethernet output, it should work with any computer, including one running Windows 98, that has an Ethernet adapter. If your computer doesn't have an Ethernet adapter, see if it has an available PCI slot for installing one. -- Best Wishes, Steve Winograd, MS-MVP (Windows Desktop Experience) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com |
#9
|
|||
|
|||
Internet connection with ethernet
I just had to work on a 98se (second edition) OS for a friend and installed a
3com 3c905c-tx PCI network card on the machine and had the same problems described here. This is what I did and everything worked fine. I installed the NIC card and drivers. I uninstalled all network protocals: IPX/IP TCP/IP Networks for Microsoft etc I rebooted the machine and windows 98se automatically recognized the NIC card and previously installed drivers then automatically reinstalled the PROTOCOLS for networks. I connected my RJ-45 cord to the NIC card and then: I clicked Internet Explorer and was online. |
#10
|
|||
|
|||
Hi! Dear, are you, OK? “God bless you. With his love. That makes everyday. A joy to live”. Are you sincere about friendship? I know very well that life is nothing without real friend. But “A friend in need is a friend indeed”. I am willing to create a good friendship with you. I propose you to create a real friendship & like following page! Would you be liked it? If you love me as like real friend, please grant my request! Come, observe & celebrate with me:
Please click this word. Lee Honish Short Sales Short Sale Training Short Sale Investor Training REO Training Real Estate Training Real Estate Marketing Most welcome to new sky view. I hope your happiness! Thanks, |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sat connection to existing ethernet. | pjp | Networking | 14 | March 10th 08 07:17 AM |
ethernet connection problem | [email protected] | Hardware | 1 | May 30th 06 09:15 PM |
Ethernet Connection Problems with IBM 600 Laptop | Edward S. Baiz Jr. | Networking | 1 | July 6th 04 12:40 PM |
Ethernet connection problem | John P | Internet | 0 | June 8th 04 12:27 PM |
Ethernet connection problem | John | Hardware | 0 | June 8th 04 12:22 PM |