A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows ME » Networking
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

ME can't find W2K machine



 
 
Thread Tools Display Modes
  #1  
Old January 21st 07, 12:40 AM posted to microsoft.public.windowsme.networking
Pat Glenn
External Usenet User
 
Posts: 6
Default ME can't find W2K machine

Having recently acquired some older computers I am now setting up a P2P
network. I am trying to determine why my ME machince does not seem able to
connect to my Win2K machine.

All machines:
-New installation of appropriate OS's
-No apparent hardware issues
-Using thin-net 10base2
-File and printer sharing enabled
-Logging on with administrator account (same password and user)

Machine A:
-Win2K (NT5)
-Modem for internet connection
-requires (ctrl-alt-del) log-on
-IP Addres set to 192.168.0.1/255.255.255.0

Machine B:
-WinXP Home
-requires log-on
-IP Addres set to 192.168.0.25/255.255.255.0

Machine C:
-WinME
-requires log-on
-IP Addres set to 192.168.0.50/255.255.255.0

Now; using the windows explorer...

Machine A can see B & C and connect to and use their resources.

Machine B can see A & C and connect to and use their resources.

Machine C can see B and connect to and use its resources. But, Machine C can
see A in the 'my network places' but cannot make a connection.

I have already tried reinstallation of the network software on Machine C. I
have also replaced the network card in C with the card from both other
machines. The problem continues as above. Any ideas?


  #2  
Old January 22nd 07, 01:36 PM posted to microsoft.public.windowsme.networking
John John
External Usenet User
 
Posts: 359
Default ME can't find W2K machine

Pat Glenn wrote:
Having recently acquired some older computers I am now setting up a P2P
network. I am trying to determine why my ME machince does not seem able to
connect to my Win2K machine.

All machines:
-New installation of appropriate OS's
-No apparent hardware issues
-Using thin-net 10base2
-File and printer sharing enabled
-Logging on with administrator account (same password and user)

Machine A:
-Win2K (NT5)
-Modem for internet connection
-requires (ctrl-alt-del) log-on
-IP Addres set to 192.168.0.1/255.255.255.0

Machine B:
-WinXP Home
-requires log-on
-IP Addres set to 192.168.0.25/255.255.255.0

Machine C:
-WinME
-requires log-on
-IP Addres set to 192.168.0.50/255.255.255.0

Now; using the windows explorer...

Machine A can see B & C and connect to and use their resources.

Machine B can see A & C and connect to and use their resources.

Machine C can see B and connect to and use its resources. But, Machine C can
see A in the 'my network places' but cannot make a connection.

I have already tried reinstallation of the network software on Machine C. I
have also replaced the network card in C with the card from both other
machines. The problem continues as above. Any ideas?


What happens when you try to make a connection? What error messages are
you receiving? Does Windows 2000 record an event in the Event Log when
you try to access it from the ME machine?

John

  #3  
Old January 22nd 07, 02:20 PM posted to microsoft.public.windowsme.networking
Steve Winograd [MVP]
External Usenet User
 
Posts: 196
Default ME can't find W2K machine

In article HLxsh.171729$hn.106101@edtnps82, "Pat Glenn"
wrote:
Having recently acquired some older computers I am now setting up a P2P
network. I am trying to determine why my ME machince does not seem able to
connect to my Win2K machine.

All machines:
-New installation of appropriate OS's
-No apparent hardware issues
-Using thin-net 10base2
-File and printer sharing enabled
-Logging on with administrator account (same password and user)

Machine A:
-Win2K (NT5)
-Modem for internet connection
-requires (ctrl-alt-del) log-on
-IP Addres set to 192.168.0.1/255.255.255.0

Machine B:
-WinXP Home
-requires log-on
-IP Addres set to 192.168.0.25/255.255.255.0

Machine C:
-WinME
-requires log-on
-IP Addres set to 192.168.0.50/255.255.255.0

Now; using the windows explorer...

Machine A can see B & C and connect to and use their resources.

Machine B can see A & C and connect to and use their resources.

Machine C can see B and connect to and use its resources. But, Machine C can
see A in the 'my network places' but cannot make a connection.

I have already tried reinstallation of the network software on Machine C. I
have also replaced the network card in C with the card from both other
machines. The problem continues as above. Any ideas?


With a thin-net 10base2 network, make sure that there are proper
terminators on the network cards of the computers at both ends of the
cable.

Make sure that any firewall programs are configured to allow access by
other computers on the local area network.

How are you trying to make a connection from Machine C to Machine A?
What exactly happens when you do it? If there's an error message,
what does it say?

Can Machine C ping Machine A by IP address and by computer name?
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm
  #4  
Old January 23rd 07, 06:02 AM posted to microsoft.public.windowsme.networking
Pat Glenn
External Usenet User
 
Posts: 6
Default ME can't find W2K machine

With a thin-net 10base2 network, make sure that there are proper
terminators on the network cards of the computers at both ends of the
cable.


Yes

Make sure that any firewall programs are configured to allow access by
other computers on the local area network.


A firewall is installed on A (NT machine) I believe it is set up properly.
Again, default settings for a new installation. It does not seem to cause
any problems for the XP machine. The XP machine (B) also has it's firewall
up and running (deafult from installation) but again, it doesn't seem to
cause any issues. with either machine accessing it.

How are you trying to make a connection from Machine C to Machine A?
What exactly happens when you do it? If there's an error message,
what does it say?


From explorer: MyNetworkPlaces/EntireNetwork/Network/Computer

Computers A.B & C all show up on the list. C's own resources are accessable
as well as B's. Attempting to access A (by clicking on icon in explorer
window) produces a dialog box with the following error: "A" is not
acessable. This device does not exist on the network.

Can Machine C ping Machine A by IP address and by computer name?


Yes and Yes

One thing I have also noticed is that while the connection between the XP
and ME machine is 'lightning fast', the connection from the NT machine to
either the XP or ME machines seems to take a long time to resolve (the
little flashlight icon searching).


"Steve Winograd [MVP]" wrote in message
...
In article HLxsh.171729$hn.106101@edtnps82, "Pat Glenn"
wrote:
Having recently acquired some older computers I am now setting up a P2P
network. I am trying to determine why my ME machince does not seem able

to
connect to my Win2K machine.

All machines:
-New installation of appropriate OS's
-No apparent hardware issues
-Using thin-net 10base2
-File and printer sharing enabled
-Logging on with administrator account (same password and user)

Machine A:
-Win2K (NT5)
-Modem for internet connection
-requires (ctrl-alt-del) log-on
-IP Addres set to 192.168.0.1/255.255.255.0

Machine B:
-WinXP Home
-requires log-on
-IP Addres set to 192.168.0.25/255.255.255.0

Machine C:
-WinME
-requires log-on
-IP Addres set to 192.168.0.50/255.255.255.0

Now; using the windows explorer...

Machine A can see B & C and connect to and use their resources.

Machine B can see A & C and connect to and use their resources.

Machine C can see B and connect to and use its resources. But, Machine C

can
see A in the 'my network places' but cannot make a connection.

I have already tried reinstallation of the network software on Machine C.

I
have also replaced the network card in C with the card from both other
machines. The problem continues as above. Any ideas?


With a thin-net 10base2 network, make sure that there are proper
terminators on the network cards of the computers at both ends of the
cable.

Make sure that any firewall programs are configured to allow access by
other computers on the local area network.

How are you trying to make a connection from Machine C to Machine A?
What exactly happens when you do it? If there's an error message,
what does it say?

Can Machine C ping Machine A by IP address and by computer name?
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm



  #5  
Old January 23rd 07, 06:09 AM posted to microsoft.public.windowsme.networking
Pat Glenn
External Usenet User
 
Posts: 6
Default ME can't find W2K machine

From explorer: MyNetworkPlaces/EntireNetwork/Network/Computer

Computers A.B & C all show up on the list. C's own resources are accessable
as well as B's. Attempting to access A (by clicking on icon in explorer
window) produces a dialog box with the following error: "A" is not
acessable. This device does not exist on the network

There was one event recorded but unfortunately, I did not record what I was
doing at the time. The message was "The browser was unable to retrieve a
list of servers from the browser master \\ NAME on the network
\device\nwlnknb. The data is the error code. "

It seems that with all my twiddling about I have managed to 'break' my
internet sharing connection. I had it working quite well the other day. Oh
bother...


"John John" wrote in message
...
Pat Glenn wrote:
Having recently acquired some older computers I am now setting up a P2P
network. I am trying to determine why my ME machince does not seem able

to
connect to my Win2K machine.

All machines:
-New installation of appropriate OS's
-No apparent hardware issues
-Using thin-net 10base2
-File and printer sharing enabled
-Logging on with administrator account (same password and user)

Machine A:
-Win2K (NT5)
-Modem for internet connection
-requires (ctrl-alt-del) log-on
-IP Addres set to 192.168.0.1/255.255.255.0

Machine B:
-WinXP Home
-requires log-on
-IP Addres set to 192.168.0.25/255.255.255.0

Machine C:
-WinME
-requires log-on
-IP Addres set to 192.168.0.50/255.255.255.0

Now; using the windows explorer...

Machine A can see B & C and connect to and use their resources.

Machine B can see A & C and connect to and use their resources.

Machine C can see B and connect to and use its resources. But, Machine C

can
see A in the 'my network places' but cannot make a connection.

I have already tried reinstallation of the network software on Machine

C. I
have also replaced the network card in C with the card from both other
machines. The problem continues as above. Any ideas?


What happens when you try to make a connection? What error messages are
you receiving? Does Windows 2000 record an event in the Event Log when
you try to access it from the ME machine?

John



  #6  
Old January 23rd 07, 03:39 PM posted to microsoft.public.windowsme.networking
John John
External Usenet User
 
Posts: 359
Default ME can't find W2K machine

Double check your username and password make sure that the password on
the ME and Windows 2000 are identical, perhaps you mistyped the password
or perhaps you have CAPS in one password and not the other. Windows XP
Home wont make a fuss about that but Windows 2000 will.

For troubleshooting purposed completely disable the firewalls on these
two machines, firewalls are often at fault with these type of errors.
Verify your protocols and bindings, it appears that you may have
unecessary protocols on the machines. Unecessary protocols add extra
layers of complexity and can cause excess ntwork traffic and collisions
that slows down the network. You probably only need TCP/IP.

John

Pat Glenn wrote:
From explorer: MyNetworkPlaces/EntireNetwork/Network/Computer

Computers A.B & C all show up on the list. C's own resources are accessable
as well as B's. Attempting to access A (by clicking on icon in explorer
window) produces a dialog box with the following error: "A" is not
acessable. This device does not exist on the network

There was one event recorded but unfortunately, I did not record what I was
doing at the time. The message was "The browser was unable to retrieve a
list of servers from the browser master \\ NAME on the network
\device\nwlnknb. The data is the error code. "

It seems that with all my twiddling about I have managed to 'break' my
internet sharing connection. I had it working quite well the other day. Oh
bother...


"John John" wrote in message
...

Pat Glenn wrote:

Having recently acquired some older computers I am now setting up a P2P
network. I am trying to determine why my ME machince does not seem able


to

connect to my Win2K machine.

All machines:
-New installation of appropriate OS's
-No apparent hardware issues
-Using thin-net 10base2
-File and printer sharing enabled
-Logging on with administrator account (same password and user)

Machine A:
-Win2K (NT5)
-Modem for internet connection
-requires (ctrl-alt-del) log-on
-IP Addres set to 192.168.0.1/255.255.255.0

Machine B:
-WinXP Home
-requires log-on
-IP Addres set to 192.168.0.25/255.255.255.0

Machine C:
-WinME
-requires log-on
-IP Addres set to 192.168.0.50/255.255.255.0

Now; using the windows explorer...

Machine A can see B & C and connect to and use their resources.

Machine B can see A & C and connect to and use their resources.

Machine C can see B and connect to and use its resources. But, Machine C


can

see A in the 'my network places' but cannot make a connection.

I have already tried reinstallation of the network software on Machine


C. I

have also replaced the network card in C with the card from both other
machines. The problem continues as above. Any ideas?


What happens when you try to make a connection? What error messages are
you receiving? Does Windows 2000 record an event in the Event Log when
you try to access it from the ME machine?

John





  #7  
Old January 24th 07, 05:05 AM posted to microsoft.public.windowsme.networking
Pat Glenn
External Usenet User
 
Posts: 6
Default ME can't find W2K machine

OK!! I've went over the settings with a fine tooth comb and I found a
problem with the IP setup. I specified the DNS and the gateway and now I
have an active ICS between the NT and ME machines!

With all my fiddling about I seem to have broken the ICS between the NT and
XP machines, but I am pretty sure with some exploring I'll be able to
resolve that on my own. It claims to be making a connection to the internet,
but it take forever and ever and ever and ever... to download a page.
Perhaps a closer look at those setting will resolve that problem.

However, I still cannot connect from ME to NT for file and print sharing.
The problem continues as in my previous post. IE as follows

*************
Computers A.B & C all show up on the list. C's own resources are accessable
as well as B's. Attempting to access A (by clicking on icon in explorer
window) produces a dialog box with the following error: "A" is not
acessable. This device does not exist on the network
*************

"Steve Winograd [MVP]" wrote in message
...
In article HLxsh.171729$hn.106101@edtnps82, "Pat Glenn"
wrote:
Having recently acquired some older computers I am now setting up a P2P
network. I am trying to determine why my ME machince does not seem able

to
connect to my Win2K machine.

All machines:
-New installation of appropriate OS's
-No apparent hardware issues
-Using thin-net 10base2
-File and printer sharing enabled
-Logging on with administrator account (same password and user)

Machine A:
-Win2K (NT5)
-Modem for internet connection
-requires (ctrl-alt-del) log-on
-IP Addres set to 192.168.0.1/255.255.255.0

Machine B:
-WinXP Home
-requires log-on
-IP Addres set to 192.168.0.25/255.255.255.0

Machine C:
-WinME
-requires log-on
-IP Addres set to 192.168.0.50/255.255.255.0

Now; using the windows explorer...

Machine A can see B & C and connect to and use their resources.

Machine B can see A & C and connect to and use their resources.

Machine C can see B and connect to and use its resources. But, Machine C

can
see A in the 'my network places' but cannot make a connection.

I have already tried reinstallation of the network software on Machine C.

I
have also replaced the network card in C with the card from both other
machines. The problem continues as above. Any ideas?


With a thin-net 10base2 network, make sure that there are proper
terminators on the network cards of the computers at both ends of the
cable.

Make sure that any firewall programs are configured to allow access by
other computers on the local area network.

How are you trying to make a connection from Machine C to Machine A?
What exactly happens when you do it? If there's an error message,
what does it say?

Can Machine C ping Machine A by IP address and by computer name?
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Registry Editor launching on start-up Chris Lloyd-Staples General 14 April 15th 06 11:33 PM
Should I increase my RAM? Lil' Dave General 16 October 16th 05 02:16 PM
"Open With..." shortcut pops up on my desktop during startup Phil James General 6 July 2nd 05 04:24 AM
Win98SE CPUROCKET.DLL Not found! Wayne Improving Performance 16 December 6th 04 08:54 AM
Startup John General 9 October 9th 04 05:55 AM


All times are GMT +1. The time now is 07:40 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.