If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Plug and Play............
I'm told that in BIOS there is this option that I cannot found " Plug'n'
Play OS installed ". I should Set this option to No so that the BIOS will initialize any plug'n' play devices. Why cannot find this option ? Is my Bios old ( my PC has three years) ? Many thanks,regards Lando. |
#2
|
|||
|
|||
Plug and Play............
May be the menu is changed in my Bios.
I see in PnP/PCI Configuration menu the option "Reset Configuration Data " that is Disabled and this means that Bios a not OS works on plug'n'play devices. It is as (may be the old) " Plug'n'Play OS installed " set to NO. Correct ? "Lando" ha scritto nel messaggio ... I'm told that in BIOS there is this option that I cannot found " Plug'n' Play OS installed ". I should Set this option to No so that the BIOS will initialize any plug'n' play devices. Why cannot find this option ? Is my Bios old ( my PC has three years) ? Many thanks,regards Lando. |
#3
|
|||
|
|||
Plug and Play............
"Reset Configuration Data" will return the BIOS to it's default settings.
If you can find *any* reference to Plug and Play, that's probably the one you're looking for. If you can't find one then I wouldn't worry about it. What problems are you experiencing that you have to play with the BIOS ? Rick Lando wrote: May be the menu is changed in my Bios. I see in PnP/PCI Configuration menu the option "Reset Configuration Data " that is Disabled and this means that Bios a not OS works on plug'n'play devices. It is as (may be the old) " Plug'n'Play OS installed " set to NO. Correct ? "Lando" ha scritto nel messaggio ... I'm told that in BIOS there is this option that I cannot found " Plug'n' Play OS installed ". I should Set this option to No so that the BIOS will initialize any plug'n' play devices. Why cannot find this option ? Is my Bios old ( my PC has three years) ? Many thanks,regards Lando. |
#4
|
|||
|
|||
Plug and Play............
In that menu there is also "Resource Controlled By " if AUTO is set
BIOS autocontrols also PnP device... This setting is requested by Linux Mandrake installation....... Many thanks. "Rick T" ha scritto nel messaggio ... "Reset Configuration Data" will return the BIOS to it's default settings. If you can find *any* reference to Plug and Play, that's probably the one you're looking for. If you can't find one then I wouldn't worry about it. What problems are you experiencing that you have to play with the BIOS ? Rick Lando wrote: May be the menu is changed in my Bios. I see in PnP/PCI Configuration menu the option "Reset Configuration Data " that is Disabled and this means that Bios a not OS works on plug'n'play devices. It is as (may be the old) " Plug'n'Play OS installed " set to NO. Correct ? "Lando" ha scritto nel messaggio ... I'm told that in BIOS there is this option that I cannot found " Plug'n' Play OS installed ". I should Set this option to No so that the BIOS will initialize any plug'n' play devices. Why cannot find this option ? Is my Bios old ( my PC has three years) ? Many thanks,regards Lando. |
#5
|
|||
|
|||
Plug and Play............
Lando wrote:
In that menu there is also "Resource Controlled By " if AUTO is set BIOS autocontrols also PnP device... That's the one. If you want it to be the same as "Plug and Play OS = No" then set it to AUTO. This setting is requested by Linux Mandrake installation....... :X Good Luck Rick Many thanks. "Rick T" ha scritto nel messaggio ... "Reset Configuration Data" will return the BIOS to it's default settings. If you can find *any* reference to Plug and Play, that's probably the one you're looking for. If you can't find one then I wouldn't worry about it. What problems are you experiencing that you have to play with the BIOS ? Rick Lando wrote: May be the menu is changed in my Bios. I see in PnP/PCI Configuration menu the option "Reset Configuration Data " that is Disabled and this means that Bios a not OS works on plug'n'play devices. It is as (may be the old) " Plug'n'Play OS installed " set to NO. Correct ? "Lando" ha scritto nel messaggio ... I'm told that in BIOS there is this option that I cannot found " Plug'n' Play OS installed ". I should Set this option to No so that the BIOS will initialize any plug'n' play devices. Why cannot find this option ? Is my Bios old ( my PC has three years) ? Many thanks,regards Lando. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Please help! Display settings !! | Mitzi | Monitors & Displays | 12 | July 11th 04 05:19 AM |
Computer freezing/hanging up | Jennifer | General | 9 | July 3rd 04 06:20 AM |
SSDP Service | Karla | Software & Applications | 1 | June 23rd 04 10:38 AM |
Plug and Play Device Driver Not Loaded | rick | Plug & Play | 1 | June 12th 04 10:42 AM |
Plug and Play Extension driver | Chris | Hardware | 2 | May 10th 04 03:51 PM |