If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
cd rom
i added more memory as a slave and now my cd drive will
not function properly |
#2
|
|||
|
|||
Hi Tod,
somtimes you CAN'T add a Hardrive on the same cable as the CD-ROM Drive. Open your PC'S cover and look on the hard Drive.Does it Say MASTER on it??? If so take out your CD-ROM drive and look in the back of it and find place were it says: Cable select,MASTER,SLAVE. Move the small connecter to Slave an see if it works. BE SURE YOU REMEMBER TO CONNECT EVERY THING BACK WERE IT WAS. IF that don't work move the selector back were it was. C For information on installing W98, go to: http://home.satx.rr.com/badour/html/w98_restore.html or go to: http://www.waynescomputerworld.com/cleaninstall.html ^ Also tells you how to Formate/Reformate your Hard Drive for Reintallation(s.)^ But if you DON'T have a boot disk go to: www.bootdisk.com Have a good day. -----Tod said,----- i added more memory as a slave and now my cd drive will not function properly . |
Thread Tools | |
Display Modes | |
|
|