|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
October 3rd 06, 07:33 PM
posted to microsoft.public.win98.setup
|
|||
|
|||
Re-enabliing Ethernet
This ASUS P4P800 motherboard has built-in
Ethernet LAN, described as "Marvell Yukon Ethernet" before I disabled it in BIOS (having in 2004 multiple difficulties with a bad OS installation and faulty DUN -- all solved then.) Now with a wireless modem on hand I need to reinstal Ethernet capacity: 1. In the BIOS I re-enabled On-board LAN. Should I also re-enable On-board LAN boot ROM? (No explanation in MB manual.) 2. What drivers (or INF file) are required for Marvell Yukon Internet? When PCI Ethernet is found at reboot as a New Device Win98SE fails to find for itself the right drivers: and no subfolder on the CD in / Drivers / Netlan is named anything like Marvell or Yukon (neither listed in its README.TXT.) 2b. No fewer than 222 INF files on C: include the string ETHERNET -- but not one MARVELL or YUKON. What next in order to activate the Ethernet device? -- Don Phillipson Carlsbad Springs (Ottawa, Canada) 
|
|
#2
October 3rd 06, 09:19 PM
posted to microsoft.public.win98.setup
|
|||
|
|||
|
Re-enabliing Ethernet
Solved.
"Don Phillipson" wrote in message ... This ASUS P4P800 motherboard has built-in Ethernet LAN, described as "Marvell Yukon Ethernet" before I disabled it in BIOS (having in 2004 multiple difficulties with a bad OS installation and faulty DUN -- all solved then.) Now with a wireless modem on hand I need to reinstal Ethernet capacity: 1. In the BIOS I re-enabled On-board LAN. Should I also re-enable On-board LAN boot ROM? (No explanation in MB manual.) 2. What drivers (or INF file) are required for Marvell Yukon Internet? When PCI Ethernet is found at reboot as a New Device Win98SE fails to find for itself the right drivers: and no subfolder on the CD in / Drivers / Netlan is named anything like Marvell or Yukon (neither listed in its README.TXT.) 2b. No fewer than 222 INF files on C: include the string ETHERNET -- but not one MARVELL or YUKON. What next in order to activate the Ethernet device? Aargh -- was on the ASUS motherboard setup CD. OK now I think. -- Don Phillipson Carlsbad Springs (Ottawa, Canada)
|
|
#3
October 4th 06, 12:17 AM
posted to microsoft.public.win98.setup
|
|||
|
|||
|
Re-enabliing Ethernet
it should be on the motherboard CD. If not you can download the drivers from
asus -- Jon Hildrum www.hildrum.com "Don Phillipson" wrote in message ... This ASUS P4P800 motherboard has built-in Ethernet LAN, described as "Marvell Yukon Ethernet" before I disabled it in BIOS (having in 2004 multiple difficulties with a bad OS installation and faulty DUN -- all solved then.) Now with a wireless modem on hand I need to reinstal Ethernet capacity: 1. In the BIOS I re-enabled On-board LAN. Should I also re-enable On-board LAN boot ROM? (No explanation in MB manual.) 2. What drivers (or INF file) are required for Marvell Yukon Internet? When PCI Ethernet is found at reboot as a New Device Win98SE fails to find for itself the right drivers: and no subfolder on the CD in / Drivers / Netlan is named anything like Marvell or Yukon (neither listed in its README.TXT.) 2b. No fewer than 222 INF files on C: include the string ETHERNET -- but not one MARVELL or YUKON. What next in order to activate the Ethernet device? -- Don Phillipson Carlsbad Springs (Ottawa, Canada)
|
|
#4
October 4th 06, 03:45 PM
posted to microsoft.public.win98.setup
|
|||
|
|||
|
Re-enabliing Ethernet
"Don Phillipson" wrote in message
... Solved. "Don Phillipson" wrote in message ... This ASUS P4P800 motherboard has built-in Ethernet LAN, described as "Marvell Yukon Ethernet" before I disabled it in BIOS (having in 2004 multiple difficulties with a bad OS installation and faulty DUN -- all solved then.) Now with a wireless modem on hand I need to reinstal Ethernet capacity: 1. In the BIOS I re-enabled On-board LAN. Should I also re-enable On-board LAN boot ROM? (No explanation in MB manual.) 2. What drivers (or INF file) are required for Marvell Yukon Internet? When PCI Ethernet is found at reboot as a New Device Win98SE fails to find for itself the right drivers: and no subfolder on the CD in / Drivers / Netlan is named anything like Marvell or Yukon (neither listed in its README.TXT.) 2b. No fewer than 222 INF files on C: include the string ETHERNET -- but not one MARVELL or YUKON. What next in order to activate the Ethernet device? Aargh -- was on the ASUS motherboard setup CD. OK now I think. -- Don Phillipson Carlsbad Springs (Ottawa, Canada) To the original #1 question, no if it boots from the local hard drive. It should have never been enabled to begin with - "re-enable". -- Jonny
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with W98 seeing ethernet | Supreme Galactic Commander | Networking | 4 | February 10th 06 08:17 PM |
| Ethernet problem with connection and boot-up | arthur dameron | Setup & Installation | 1 | July 6th 05 06:39 AM |
| Ethernet adapter cannot connect to cable modem | Will | Networking | 0 | February 9th 05 08:06 PM |
| Win ME Home Networking , ADSL, Wireless Router & Ethernet Port Issue | Chandra Madhira | Networking | 3 | September 29th 04 10:03 AM |
| Ethernet and Modem | Don Phillipson | Setup & Installation | 0 | August 11th 04 12:33 PM |
Linear Mode
