A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Networking
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Connecting laptop via ser



 
 
Thread Tools Display Modes
  #1  
Old December 15th 06, 07:47 AM posted to alt.windows98,microsoft.public.win98.networking,comp.sys.laptops
Philip Halog
External Usenet User
 
Posts: 2
Default Connecting laptop via serial or parallel port - w/virtual drive letter

Try using a USB flash memory drive....

wrote in message
ups.com...
I need to network my laptop to my desktop so the laptop sees a virtual
drive letter that's actually a directory on the desktop. The laptop is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows has
"direct cable connection" for serial/parallel, but Mircrosoft says
"Before you can transfer files from the host to the guest computer, the
files must be in a shared directory,..."

(http://www.microsoft.com/technet/arc...rkc19.mspx?mfr
=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because I
expect it to be cheaper, and I won't be needing it again - if this will
work.

The reason I need this is that files were accidently deleted from the
laptop via DOS. The file recovery software can see them, and it asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save the
restored files locally first, because that could corrupt the other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)

Any help appreciated.



  #2  
Old April 27th 11, 11:43 AM posted to alt.windows98
jim_b
external usenet poster
 
Posts: 5
Default Connecting laptop via ser

To: alt.windows98,microsoft.p
I need to network my laptop to my desktop so the laptop sees a virtual
drive letter that's actually a directory on the desktop. The laptop is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows has
"direct cable connection" for serial/parallel, but Mircrosoft says
"Before you can transfer files from the host to the guest computer, the
files must be in a shared directory,..."
(http://www.microsoft.com/technet/arc...mspx?mfr=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because I
expect it to be cheaper, and I won't be needing it again - if this will
work.

The reason I need this is that files were accidently deleted from the
laptop via DOS. The file recovery software can see them, and it asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save the
restored files locally first, because that could corrupt the other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)

Any help appreciated.

---
* Synchronet * The Whitehouse BBS --- whitehouse.hulds.com --- check it out free usenet!
--- Synchronet 3.15a-Win32 NewsLink 1.92
Time Warp of the Future BBS - telnet://time.synchro.net:24
  #3  
Old April 27th 11, 11:43 AM posted to alt.windows98
Pop`[_2_]
external usenet poster
 
Posts: 1
Default Connecting laptop via

To: alt.windows98,microsoft.p
wrote:
I need to network my laptop to my desktop so the laptop sees a virtual
drive letter that's actually a directory on the desktop. The laptop is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows
has "direct cable connection" for serial/parallel, but Mircrosoft says
"Before you can transfer files from the host to the guest computer,
the files must be in a shared directory,..."
(
http://www.microsoft.com/technet/arc...mspx?mfr=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because I
expect it to be cheaper, and I won't be needing it again - if this
will work.

The reason I need this is that files were accidently deleted from the
laptop via DOS. The file recovery software can see them, and it asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save
the restored files locally first, because that could corrupt the other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)

Any help appreciated.


You can do that; or, if hte machines each have an ethernet card, or you want
to spend a couple bucks (they're cheap) to outfit them, all you need is a
crossover cable between the two computers to network them without a swtich
or router even. Easier and likely a lot faster way to get it going. Then
there's no need to fiddle with drive associations either; the local and
remote drives on each machine, all available.

Pop`

---
* Synchronet * The Whitehouse BBS --- whitehouse.hulds.com --- check it out free usenet!
--- Synchronet 3.15a-Win32 NewsLink 1.92
Time Warp of the Future BBS - telnet://time.synchro.net:24
  #4  
Old April 27th 11, 11:43 AM posted to alt.windows98
jim_b
external usenet poster
 
Posts: 5
Default Connecting laptop via

To: alt.windows98,microsoft.p

Pop` wrote:
wrote:
I need to network my laptop to my desktop so the laptop sees a virtual
drive letter that's actually a directory on the desktop. The laptop is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows
has "direct cable connection" for serial/parallel, but Mircrosoft says
"Before you can transfer files from the host to the guest computer,
the files must be in a shared directory,..."
(
http://www.microsoft.com/technet/arc...mspx?mfr=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because I
expect it to be cheaper, and I won't be needing it again - if this
will work.

The reason I need this is that files were accidently deleted from the
laptop via DOS. The file recovery software can see them, and it asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save
the restored files locally first, because that could corrupt the other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)

Any help appreciated.


You can do that; or, if hte machines each have an ethernet card, or you want
to spend a couple bucks (they're cheap) to outfit them, all you need is a
crossover cable between the two computers to network them without a swtich
or router even. Easier and likely a lot faster way to get it going. Then
there's no need to fiddle with drive associations either; the local and
remote drives on each machine, all available.

Pop`


What?? I consider an ethernet card a network card.

---
* Synchronet * The Whitehouse BBS --- whitehouse.hulds.com --- check it out free usenet!
--- Synchronet 3.15a-Win32 NewsLink 1.92
Time Warp of the Future BBS - telnet://time.synchro.net:24
  #5  
Old April 27th 11, 11:43 AM posted to alt.windows98
- Bobb -[_2_]
external usenet poster
 
Posts: 5
Default Connecting laptop via

To: alt.windows98,microsoft.p
This is NOT a "regular parallel printer cable" you might have hanging
around - see:

http://www.microsoft.com/resources/d....mspx?mfr=true
(yeah it's on the xp page but 98 or xp = same thing):

"To contact Parallel Technologies to order Direct Cable Connection
cables"
Within the United States and Canada: (800) 789-4784
Outside the United States and Canada: (425) 869-1119
etc

so if you're trying to avoid spending $$ - that's not an option.

How big are the files - how about restore them to floppy on laptop?

Bobb


================================================


wrote in message
ups.com...

Pop` wrote:
wrote:
I need to network my laptop to my desktop so the laptop sees a
virtual
drive letter that's actually a directory on the desktop. The laptop
is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows
has "direct cable connection" for serial/parallel, but Mircrosoft
says
"Before you can transfer files from the host to the guest computer,
the files must be in a shared directory,..."
(
http://www.microsoft.com/technet/arc...mspx?mfr=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a
PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and
ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because
I
expect it to be cheaper, and I won't be needing it again - if this
will work.

The reason I need this is that files were accidently deleted from
the
laptop via DOS. The file recovery software can see them, and it
asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save
the restored files locally first, because that could corrupt the
other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)

Any help appreciated.


You can do that; or, if hte machines each have an ethernet card, or
you want
to spend a couple bucks (they're cheap) to outfit them, all you need
is a
crossover cable between the two computers to network them without a
swtich
or router even. Easier and likely a lot faster way to get it going.
Then
there's no need to fiddle with drive associations either; the local
and
remote drives on each machine, all available.

Pop`


What?? I consider an ethernet card a network card.


---
* Synchronet * The Whitehouse BBS --- whitehouse.hulds.com --- check it out free usenet!
--- Synchronet 3.15a-Win32 NewsLink 1.92
Time Warp of the Future BBS - telnet://time.synchro.net:24
  #6  
Old April 27th 11, 11:43 AM posted to alt.windows98
Bill Watt[_4_]
external usenet poster
 
Posts: 1
Default Connecting laptop via

To: alt.windows98,microsoft.p

Reply inline:

On 14 Dec 2006 12:25:46 -0800, wrote:

I need to network my laptop to my desktop so the laptop sees a virtual
drive letter that's actually a directory on the desktop. The laptop is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows has
"direct cable connection" for serial/parallel, but Mircrosoft says
"Before you can transfer files from the host to the guest computer, the
files must be in a shared directory,..."
(
http://www.microsoft.com/technet/arc...mspx?mfr=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because I
expect it to be cheaper, and I won't be needing it again - if this will
work.


FWIW For Direct Cable Connection a Data Transfer type cable
(Laplink type), male to male, must be used for a parallel printer
port connection ($7.00 at Staples). Printer and null modem cables
wonAt work for this. I have the cable and it works.

How to Setup Direct Cable Connection
http://home.ptd.net/~bwatt/directcc.html

Regards,

Bill Watt
Win98 Computer Help & Other Information
http://home.ptd.net/~bwatt/
__________________________________________________ _________

The reason I need this is that files were accidently deleted from the
laptop via DOS. The file recovery software can see them, and it asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save the
restored files locally first, because that could corrupt the other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)

Any help appreciated.


---
* Synchronet * The Whitehouse BBS --- whitehouse.hulds.com --- check it out free usenet!
--- Synchronet 3.15a-Win32 NewsLink 1.92
Time Warp of the Future BBS - telnet://time.synchro.net:24
  #7  
Old April 27th 11, 11:43 AM posted to alt.windows98
philo[_36_]
external usenet poster
 
Posts: 1
Default Connecting laptop via

To: alt.windows98,microsoft.p

wrote in message
ups.com...
I need to network my laptop to my desktop so the laptop sees a virtual
drive letter that's actually a directory on the desktop. The laptop is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows has
"direct cable connection" for serial/parallel, but Mircrosoft says
"Before you can transfer files from the host to the guest computer, the
files must be in a shared directory,..."
(http://www.microsoft.com/technet/arc...mspx?mfr=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because I
expect it to be cheaper, and I won't be needing it again - if this will
work.

The reason I need this is that files were accidently deleted from the
laptop via DOS. The file recovery software can see them, and it asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save the
restored files locally first, because that could corrupt the other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)




Although, in theory you could connect using a serial cable

I think it might actually be easier to just purchase a harddrive adaptor for
about $9
and temporarily connect the laptop's drive to your desktop

---
* Synchronet * The Whitehouse BBS --- whitehouse.hulds.com --- check it out free usenet!
--- Synchronet 3.15a-Win32 NewsLink 1.92
Time Warp of the Future BBS - telnet://time.synchro.net:24
  #8  
Old April 27th 11, 11:43 AM posted to alt.windows98
enquiring minds[_2_]
external usenet poster
 
Posts: 5
Default Connecting laptop via

To: alt.windows98,microsoft.p
Pop` wrote:

wrote:
I need to network my laptop to my desktop so the laptop sees a virtual
drive letter that's actually a directory on the desktop. The laptop is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows
has "direct cable connection" for serial/parallel, but Mircrosoft says
"Before you can transfer files from the host to the guest computer,
the files must be in a shared directory,..."
(
http://www.microsoft.com/technet/arc...mspx?mfr=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because I
expect it to be cheaper, and I won't be needing it again - if this
will work.

The reason I need this is that files were accidently deleted from the
laptop via DOS. The file recovery software can see them, and it asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save
the restored files locally first, because that could corrupt the other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)

Any help appreciated.


You can do that; or, if hte machines each have an ethernet card, or you want
to spend a couple bucks (they're cheap) to outfit them, all you need is a
crossover cable between the two computers to network them without a swtich
or router even. Easier and likely a lot faster way to get it going. Then
there's no need to fiddle with drive associations either; the local and
remote drives on each machine, all available.

Pop`


I have a similar problem to this guy. I tried the direct connect and
had nothing but problems as easy as it sounds.

I tried hooking up a stand alone harddrive to the USB 1. Windows98
first version can read the drive but it doesn't recognize the driver
under dos or windows 98 first edition to copy file by any method.

I was going to buy an ethernet card for my pcmia slot but it is so
special (not standard) for my old IBM thinkpad 385 that they are almost
impossible to get and very expensive.

Could I get a stand alone ethernet card and hook it to an RS232 or
parallel port or risky USB1 port and use the internet to transfer data
to my other computer as a friend suggested or will I likely meet
failure?

---
* Synchronet * The Whitehouse BBS --- whitehouse.hulds.com --- check it out free usenet!
--- Synchronet 3.15a-Win32 NewsLink 1.92
Time Warp of the Future BBS - telnet://time.synchro.net:24
  #9  
Old April 27th 11, 11:43 AM posted to alt.windows98
enquiring minds[_2_]
external usenet poster
 
Posts: 5
Default Connecting laptop via

To: alt.windows98,microsoft.p
Pop` wrote:

wrote:
I need to network my laptop to my desktop so the laptop sees a virtual
drive letter that's actually a directory on the desktop. The laptop is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows
has "direct cable connection" for serial/parallel, but Mircrosoft says
"Before you can transfer files from the host to the guest computer,
the files must be in a shared directory,..."
(
http://www.microsoft.com/technet/arc...mspx?mfr=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because I
expect it to be cheaper, and I won't be needing it again - if this
will work.

The reason I need this is that files were accidently deleted from the
laptop via DOS. The file recovery software can see them, and it asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save
the restored files locally first, because that could corrupt the other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)

Any help appreciated.


You can do that; or, if hte machines each have an ethernet card, or you want
to spend a couple bucks (they're cheap) to outfit them, all you need is a
crossover cable between the two computers to network them without a swtich
or router even. Easier and likely a lot faster way to get it going. Then
there's no need to fiddle with drive associations either; the local and
remote drives on each machine, all available.

Pop`


I have lots of cross over cables but where does the ethernet card hook
to on an old laptop? What are the connection options that will work?

Also what do you have to do to get a file tranfered from one computer to
the other using this method?

---
* Synchronet * The Whitehouse BBS --- whitehouse.hulds.com --- check it out free usenet!
--- Synchronet 3.15a-Win32 NewsLink 1.92
Time Warp of the Future BBS - telnet://time.synchro.net:24
  #10  
Old April 27th 11, 11:43 AM posted to alt.windows98
enquiring minds[_2_]
external usenet poster
 
Posts: 5
Default Connecting laptop via

To: alt.windows98,microsoft.p
philo wrote:

wrote in message
ups.com...
I need to network my laptop to my desktop so the laptop sees a virtual
drive letter that's actually a directory on the desktop. The laptop is
an older PIII with Serial, parallel, USB 1.1 - no ethernet. Windows has
"direct cable connection" for serial/parallel, but Mircrosoft says
"Before you can transfer files from the host to the guest computer, the
files must be in a shared directory,..."
(http://www.microsoft.com/technet/arc...mspx?mfr=true).

The desktop is a newer Athlon 1.0Ghz with XP Pro. The laptop is a PIII
500mhz with 98SE. The laptops serial port is an EIA232-E, 16550
compatible, 9-pin D; the parallel port is IEEE P1284-A, EPP, and ECP
compatible. Which connection would be faster (serial/parallel) - an
article on Wiipedia says asynchronous RS232 is actually faster than
parallel at higher CPU clock speeds due to "skew" caused by the
parallel cable. I'll probably just get a NULL serial cable, because I
expect it to be cheaper, and I won't be needing it again - if this will
work.

The reason I need this is that files were accidently deleted from the
laptop via DOS. The file recovery software can see them, and it asks
for a drive/directory to save the restored files in - so I need a
virtual drive letter - the desktop computer. I don't want to save the
restored files locally first, because that could corrupt the other
deleted files. (I don't want to buy a network card for the laptop,
because I don't want to install software for it...)


Although, in theory you could connect using a serial cable

I think it might actually be easier to just purchase a harddrive adaptor for
about $9
and temporarily connect the laptop's drive to your desktop


What do you mean by a harddrive adapter? What do you connect the hard
dirve adaptor to on an
old win98 that will work?

---
* Synchronet * The Whitehouse BBS --- whitehouse.hulds.com --- check it out free usenet!
--- Synchronet 3.15a-Win32 NewsLink 1.92
Time Warp of the Future BBS - telnet://time.synchro.net:24
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Connecting a Win98SE laptop to wireless through an XP laptop? Luke.Davis Internet 1 April 13th 10 04:26 AM
Connecting a wireless laptop to a live box, wirelessly Pep Streebeck Networking 0 July 23rd 05 11:54 AM
Connecting a wireless laptop to a live box, wirelessly Pep Streebeck Networking 0 July 23rd 05 11:54 AM
Connecting a GatewayPC-Win98se to a Dell Inspiron WinXL laptop Billie Networking 1 July 15th 04 05:34 AM
Connecting my laptop to a printer via WiFi John Kirton General 3 July 11th 04 09:47 PM


All times are GMT +1. The time now is 06:10 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.