If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2 computers getting same IP address
I am trying to set up file-sharing between 3 computers over a wireless
network usng a Belkin 802.11g wireless router, desktop card, and 2 notebook cards. I was able to set up the desktop & one notebook with no trouble, and each was assigned a unique IP address, which I entered in Norton Internet Security under allowed IP addresses so that they can both join the network. Problems began when I installed a wireless notebook card in a 2nd computer. Many things went haywire, but recurrently I noticed that the notebook was getting the same IP address (192.168.2.2) as the desktop and a conflict error msg kept coming up. At times the desktop was able to communicate with one notebook over the network, and other times the 2 notebooks were able to communicate with each other. The IP address of the router (wireless access point?) is 192.168.2.1. We uninstalled and reinstalled the Belkin wireless activity s/w several times on all computers and removed and re-added "client for ms networks" as well. Please tell me how to solve this problem of 2 computers getting the same IP address. I think that is the first step here. |
#2
|
|||
|
|||
In article ,
krouse wrote: I am trying to set up file-sharing between 3 computers over a wireless network usng a Belkin 802.11g wireless router, desktop card, and 2 notebook cards. I was able to set up the desktop & one notebook with no trouble, and each was assigned a unique IP address, which I entered in Norton Internet Security under allowed IP addresses so that they can both join the network. Problems began when I installed a wireless notebook card in a 2nd computer. Many things went haywire, but recurrently I noticed that the notebook was getting the same IP address (192.168.2.2) as the desktop and a conflict error msg kept coming up. At times the desktop was able to communicate with one notebook over the network, and other times the 2 notebooks were able to communicate with each other. The IP address of the router (wireless access point?) is 192.168.2.1. We uninstalled and reinstalled the Belkin wireless activity s/w several times on all computers and removed and re-added "client for ms networks" as well. Please tell me how to solve this problem of 2 computers getting the same IP address. I think that is the first step here. 1. Make sure that the Belkin router's pool of DHCP addresses contains at least three addresses. 2. Configure the wireless network connection on each computer to obtain an IP address automatically. Don't assign it manually. 3. Disable all of the wireless connections, which will cause them to release their IP addresses. 4. Enable all of the wireless connections, which will make them lease new IP addresses. "Client for Microsoft Networks" has nothing to do with IP addressing. It lets a computer access shared disks and folders on the network. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#3
|
|||
|
|||
2 computers getting same IP address
In article ,
krouse wrote: I am trying to set up file-sharing between 3 computers over a wireless network usng a Belkin 802.11g wireless router, desktop card, and 2 notebook cards. I was able to set up the desktop & one notebook with no trouble, and each was assigned a unique IP address, which I entered in Norton Internet Security under allowed IP addresses so that they can both join the network. Problems began when I installed a wireless notebook card in a 2nd computer. Many things went haywire, but recurrently I noticed that the notebook was getting the same IP address (192.168.2.2) as the desktop and a conflict error msg kept coming up. At times the desktop was able to communicate with one notebook over the network, and other times the 2 notebooks were able to communicate with each other. The IP address of the router (wireless access point?) is 192.168.2.1. We uninstalled and reinstalled the Belkin wireless activity s/w several times on all computers and removed and re-added "client for ms networks" as well. Please tell me how to solve this problem of 2 computers getting the same IP address. I think that is the first step here. 1. Make sure that the Belkin router's pool of DHCP addresses contains at least three addresses. 2. Configure the wireless network connection on each computer to obtain an IP address automatically. Don't assign it manually. 3. Disable all of the wireless connections, which will cause them to release their IP addresses. 4. Enable all of the wireless connections, which will make them lease new IP addresses. "Client for Microsoft Networks" has nothing to do with IP addressing. It lets a computer access shared disks and folders on the network. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#4
|
|||
|
|||
Steve, could you please explain (1)? I don't know how to do that. The
Belkin router uses a wireless utility program featuring various tabs with different options, but nowhere do I see something about DHCP addresses. Do I have to manually type in the addresses which should be given? What is the difference between IP and DHCP addresses? I think that Belkin just does all this automatically anyway. I have always had the option ticked for assigning IP addresses automatically. "Steve Winograd [MVP]" wrote: In article , krouse wrote: I am trying to set up file-sharing between 3 computers over a wireless network usng a Belkin 802.11g wireless router, desktop card, and 2 notebook cards. I was able to set up the desktop & one notebook with no trouble, and each was assigned a unique IP address, which I entered in Norton Internet Security under allowed IP addresses so that they can both join the network. Problems began when I installed a wireless notebook card in a 2nd computer. Many things went haywire, but recurrently I noticed that the notebook was getting the same IP address (192.168.2.2) as the desktop and a conflict error msg kept coming up. At times the desktop was able to communicate with one notebook over the network, and other times the 2 notebooks were able to communicate with each other. The IP address of the router (wireless access point?) is 192.168.2.1. We uninstalled and reinstalled the Belkin wireless activity s/w several times on all computers and removed and re-added "client for ms networks" as well. Please tell me how to solve this problem of 2 computers getting the same IP address. I think that is the first step here. 1. Make sure that the Belkin router's pool of DHCP addresses contains at least three addresses. 2. Configure the wireless network connection on each computer to obtain an IP address automatically. Don't assign it manually. 3. Disable all of the wireless connections, which will cause them to release their IP addresses. 4. Enable all of the wireless connections, which will make them lease new IP addresses. "Client for Microsoft Networks" has nothing to do with IP addressing. It lets a computer access shared disks and folders on the network. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#5
|
|||
|
|||
2 computers getting same IP address
Steve, could you please explain (1)? I don't know how to do that. The
Belkin router uses a wireless utility program featuring various tabs with different options, but nowhere do I see something about DHCP addresses. Do I have to manually type in the addresses which should be given? What is the difference between IP and DHCP addresses? I think that Belkin just does all this automatically anyway. I have always had the option ticked for assigning IP addresses automatically. "Steve Winograd [MVP]" wrote: In article , krouse wrote: I am trying to set up file-sharing between 3 computers over a wireless network usng a Belkin 802.11g wireless router, desktop card, and 2 notebook cards. I was able to set up the desktop & one notebook with no trouble, and each was assigned a unique IP address, which I entered in Norton Internet Security under allowed IP addresses so that they can both join the network. Problems began when I installed a wireless notebook card in a 2nd computer. Many things went haywire, but recurrently I noticed that the notebook was getting the same IP address (192.168.2.2) as the desktop and a conflict error msg kept coming up. At times the desktop was able to communicate with one notebook over the network, and other times the 2 notebooks were able to communicate with each other. The IP address of the router (wireless access point?) is 192.168.2.1. We uninstalled and reinstalled the Belkin wireless activity s/w several times on all computers and removed and re-added "client for ms networks" as well. Please tell me how to solve this problem of 2 computers getting the same IP address. I think that is the first step here. 1. Make sure that the Belkin router's pool of DHCP addresses contains at least three addresses. 2. Configure the wireless network connection on each computer to obtain an IP address automatically. Don't assign it manually. 3. Disable all of the wireless connections, which will cause them to release their IP addresses. 4. Enable all of the wireless connections, which will make them lease new IP addresses. "Client for Microsoft Networks" has nothing to do with IP addressing. It lets a computer access shared disks and folders on the network. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#6
|
|||
|
|||
In article ,
krouse wrote: I am trying to set up file-sharing between 3 computers over a wireless network usng a Belkin 802.11g wireless router, desktop card, and 2 notebook cards. I was able to set up the desktop & one notebook with no trouble, and each was assigned a unique IP address, which I entered in Norton Internet Security under allowed IP addresses so that they can both join the network. Problems began when I installed a wireless notebook card in a 2nd computer. Many things went haywire, but recurrently I noticed that the notebook was getting the same IP address (192.168.2.2) as the desktop and a conflict error msg kept coming up. At times the desktop was able to communicate with one notebook over the network, and other times the 2 notebooks were able to communicate with each other. The IP address of the router (wireless access point?) is 192.168.2.1. We uninstalled and reinstalled the Belkin wireless activity s/w several times on all computers and removed and re-added "client for ms networks" as well. Please tell me how to solve this problem of 2 computers getting the same IP address. I think that is the first step here. 1. Make sure that the Belkin router's pool of DHCP addresses contains at least three addresses. 2. Configure the wireless network connection on each computer to obtain an IP address automatically. Don't assign it manually. 3. Disable all of the wireless connections, which will cause them to release their IP addresses. 4. Enable all of the wireless connections, which will make them lease new IP addresses. "Client for Microsoft Networks" has nothing to do with IP addressing. It lets a computer access shared disks and folders on the network. Steve, could you please explain (1)? I don't know how to do that. The Belkin router uses a wireless utility program featuring various tabs with different options, but nowhere do I see something about DHCP addresses. Do I have to manually type in the addresses which should be given? What is the difference between IP and DHCP addresses? I think that Belkin just does all this automatically anyway. I have always had the option ticked for assigning IP addresses automatically. Here's how to check the Belkin router's DHCP address pool: 1. Connect to the router's web server at http://192.168.2.1 2. Click Login, enter the password (if any), and click Submit. 3. Under "LAN Setup", click "LAN Settings". 4. Look at the starting and ending addresses for the IP pool. On my router, they're set to 101 and 150. 5. If necessary, change them and then click "Apply Changes". Each device (router, computer, etc) on a network needs an IP address. DHCP is a way to assign IP addresses automatically. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#7
|
|||
|
|||
2 computers getting same IP address
In article ,
krouse wrote: I am trying to set up file-sharing between 3 computers over a wireless network usng a Belkin 802.11g wireless router, desktop card, and 2 notebook cards. I was able to set up the desktop & one notebook with no trouble, and each was assigned a unique IP address, which I entered in Norton Internet Security under allowed IP addresses so that they can both join the network. Problems began when I installed a wireless notebook card in a 2nd computer. Many things went haywire, but recurrently I noticed that the notebook was getting the same IP address (192.168.2.2) as the desktop and a conflict error msg kept coming up. At times the desktop was able to communicate with one notebook over the network, and other times the 2 notebooks were able to communicate with each other. The IP address of the router (wireless access point?) is 192.168.2.1. We uninstalled and reinstalled the Belkin wireless activity s/w several times on all computers and removed and re-added "client for ms networks" as well. Please tell me how to solve this problem of 2 computers getting the same IP address. I think that is the first step here. 1. Make sure that the Belkin router's pool of DHCP addresses contains at least three addresses. 2. Configure the wireless network connection on each computer to obtain an IP address automatically. Don't assign it manually. 3. Disable all of the wireless connections, which will cause them to release their IP addresses. 4. Enable all of the wireless connections, which will make them lease new IP addresses. "Client for Microsoft Networks" has nothing to do with IP addressing. It lets a computer access shared disks and folders on the network. Steve, could you please explain (1)? I don't know how to do that. The Belkin router uses a wireless utility program featuring various tabs with different options, but nowhere do I see something about DHCP addresses. Do I have to manually type in the addresses which should be given? What is the difference between IP and DHCP addresses? I think that Belkin just does all this automatically anyway. I have always had the option ticked for assigning IP addresses automatically. Here's how to check the Belkin router's DHCP address pool: 1. Connect to the router's web server at http://192.168.2.1 2. Click Login, enter the password (if any), and click Submit. 3. Under "LAN Setup", click "LAN Settings". 4. Look at the starting and ending addresses for the IP pool. On my router, they're set to 101 and 150. 5. If necessary, change them and then click "Apply Changes". Each device (router, computer, etc) on a network needs an IP address. DHCP is a way to assign IP addresses automatically. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#8
|
|||
|
|||
I am unable to get to the router's web server - I don't know why. The router
is turned on and my PC has an IP address of 192.168.2.2, showing the default gateway at 2.1. But when I type that address in the browser, it just gives me "page cannot be displayed." I had tried this before. What could be the problem here? Should I uninstall and reinstall the router software and drivers? Please advise. "Steve Winograd [MVP]" wrote: In article , krouse wrote: I am trying to set up file-sharing between 3 computers over a wireless network usng a Belkin 802.11g wireless router, desktop card, and 2 notebook cards. I was able to set up the desktop & one notebook with no trouble, and each was assigned a unique IP address, which I entered in Norton Internet Security under allowed IP addresses so that they can both join the network. Problems began when I installed a wireless notebook card in a 2nd computer. Many things went haywire, but recurrently I noticed that the notebook was getting the same IP address (192.168.2.2) as the desktop and a conflict error msg kept coming up. At times the desktop was able to communicate with one notebook over the network, and other times the 2 notebooks were able to communicate with each other. The IP address of the router (wireless access point?) is 192.168.2.1. We uninstalled and reinstalled the Belkin wireless activity s/w several times on all computers and removed and re-added "client for ms networks" as well. Please tell me how to solve this problem of 2 computers getting the same IP address. I think that is the first step here. 1. Make sure that the Belkin router's pool of DHCP addresses contains at least three addresses. 2. Configure the wireless network connection on each computer to obtain an IP address automatically. Don't assign it manually. 3. Disable all of the wireless connections, which will cause them to release their IP addresses. 4. Enable all of the wireless connections, which will make them lease new IP addresses. "Client for Microsoft Networks" has nothing to do with IP addressing. It lets a computer access shared disks and folders on the network. Steve, could you please explain (1)? I don't know how to do that. The Belkin router uses a wireless utility program featuring various tabs with different options, but nowhere do I see something about DHCP addresses. Do I have to manually type in the addresses which should be given? What is the difference between IP and DHCP addresses? I think that Belkin just does all this automatically anyway. I have always had the option ticked for assigning IP addresses automatically. Here's how to check the Belkin router's DHCP address pool: 1. Connect to the router's web server at http://192.168.2.1 2. Click Login, enter the password (if any), and click Submit. 3. Under "LAN Setup", click "LAN Settings". 4. Look at the starting and ending addresses for the IP pool. On my router, they're set to 101 and 150. 5. If necessary, change them and then click "Apply Changes". Each device (router, computer, etc) on a network needs an IP address. DHCP is a way to assign IP addresses automatically. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#9
|
|||
|
|||
2 computers getting same IP address
I am unable to get to the router's web server - I don't know why. The router
is turned on and my PC has an IP address of 192.168.2.2, showing the default gateway at 2.1. But when I type that address in the browser, it just gives me "page cannot be displayed." I had tried this before. What could be the problem here? Should I uninstall and reinstall the router software and drivers? Please advise. "Steve Winograd [MVP]" wrote: In article , krouse wrote: I am trying to set up file-sharing between 3 computers over a wireless network usng a Belkin 802.11g wireless router, desktop card, and 2 notebook cards. I was able to set up the desktop & one notebook with no trouble, and each was assigned a unique IP address, which I entered in Norton Internet Security under allowed IP addresses so that they can both join the network. Problems began when I installed a wireless notebook card in a 2nd computer. Many things went haywire, but recurrently I noticed that the notebook was getting the same IP address (192.168.2.2) as the desktop and a conflict error msg kept coming up. At times the desktop was able to communicate with one notebook over the network, and other times the 2 notebooks were able to communicate with each other. The IP address of the router (wireless access point?) is 192.168.2.1. We uninstalled and reinstalled the Belkin wireless activity s/w several times on all computers and removed and re-added "client for ms networks" as well. Please tell me how to solve this problem of 2 computers getting the same IP address. I think that is the first step here. 1. Make sure that the Belkin router's pool of DHCP addresses contains at least three addresses. 2. Configure the wireless network connection on each computer to obtain an IP address automatically. Don't assign it manually. 3. Disable all of the wireless connections, which will cause them to release their IP addresses. 4. Enable all of the wireless connections, which will make them lease new IP addresses. "Client for Microsoft Networks" has nothing to do with IP addressing. It lets a computer access shared disks and folders on the network. Steve, could you please explain (1)? I don't know how to do that. The Belkin router uses a wireless utility program featuring various tabs with different options, but nowhere do I see something about DHCP addresses. Do I have to manually type in the addresses which should be given? What is the difference between IP and DHCP addresses? I think that Belkin just does all this automatically anyway. I have always had the option ticked for assigning IP addresses automatically. Here's how to check the Belkin router's DHCP address pool: 1. Connect to the router's web server at http://192.168.2.1 2. Click Login, enter the password (if any), and click Submit. 3. Under "LAN Setup", click "LAN Settings". 4. Look at the starting and ending addresses for the IP pool. On my router, they're set to 101 and 150. 5. If necessary, change them and then click "Apply Changes". Each device (router, computer, etc) on a network needs an IP address. DHCP is a way to assign IP addresses automatically. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Adaware SE paid version -- Worth the Cost? | Dan | General | 11 | January 12th 05 04:20 PM |
BUSINESS DIRECTORIES FOR TARGET MARKETING | R.KRISHNAN | General | 0 | December 9th 04 06:44 AM |
Computers on network don't communicate | Trish | General | 3 | November 21st 04 03:01 AM |
Can't see all computers on one computer | mcavoym1 | Networking | 2 | November 9th 04 06:57 AM |
IP Problems on WindowsME?? | JNC | Networking | 5 | August 24th 04 07:50 PM |