Autolt Error

Since downloading Microsoft Critical updates my computer
has been hanging at shutdown but despite trying various
suggestions have not managed to solve this. I also
noticed that there are blank pages in Windows 98
troubleshooter. I have managed to get the troubleshooter
back by using the quick fix posted in these newsgroups,
however when I use the troubleshooter I am getting the
Autolt Error box pop up with the following message
Line 24 WinWaitClose Error: The number of parameters is
incorrect. Could this message relate to the shut down
problem and if so how can I fix it? If someone could
explain this I would be very grateful.

AutoIT is not a Windows component, it's a scripting add-on. I'd uninstall
it and see what happens to your problems then.

--
Richard G. Harper [MVP Win9x]
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"AGS" wrote in message
...
Since downloading Microsoft Critical updates my computer
has been hanging at shutdown but despite trying various
suggestions have not managed to solve this. I also
noticed that there are blank pages in Windows 98
troubleshooter. I have managed to get the troubleshooter
back by using the quick fix posted in these newsgroups,
however when I use the troubleshooter I am getting the
Autolt Error box pop up with the following message
Line 24 WinWaitClose Error: The number of parameters is
incorrect. Could this message relate to the shut down
problem and if so how can I fix it? If someone could
explain this I would be very grateful.

Can you tell me how to uninstall this please?

-----Original Message-----
AutoIT is not a Windows component, it's a scripting add-
on. I'd uninstall
it and see what happens to your problems then.

--
Richard G. Harper [MVP Win9x]
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not
replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"AGS" wrote in
message
...
Since downloading Microsoft Critical updates my computer
has been hanging at shutdown but despite trying various
suggestions have not managed to solve this. I also
noticed that there are blank pages in Windows 98
troubleshooter. I have managed to get the
troubleshooter
back by using the quick fix posted in these newsgroups,
however when I use the troubleshooter I am getting the
Autolt Error box pop up with the following message
Line 24 WinWaitClose Error: The number of parameters is
incorrect. Could this message relate to the shut down
problem and if so how can I fix it? If someone could
explain this I would be very grateful.


.

I have AutoIt, and it shows up in the Control Panel applet "Add/Remove
Programs". Try removing it from there.
HTH,

--
Curt--not the MVP by the same name

W98 Support & Discussion:
http://dundats.proboards27.com/index.cgi
Windows How-tos and and Freewa
http://mvps.org/PracticallyNerded/
Windows Help & Discussion:
http://forum.aumha.org/

wrote in message
...
Can you tell me how to uninstall this please?

-----Original Message-----
AutoIT is not a Windows component, it's a scripting add-
on. I'd uninstall
it and see what happens to your problems then.

--
Richard G. Harper [MVP Win9x]
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not
replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"AGS" wrote in
message
...
Since downloading Microsoft Critical updates my computer
has been hanging at shutdown but despite trying various
suggestions have not managed to solve this. I also
noticed that there are blank pages in Windows 98
troubleshooter. I have managed to get the
troubleshooter
back by using the quick fix posted in these newsgroups,
however when I use the troubleshooter I am getting the
Autolt Error box pop up with the following message
Line 24 WinWaitClose Error: The number of parameters is
incorrect. Could this message relate to the shut down
problem and if so how can I fix it? If someone could
explain this I would be very grateful.


.



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.705 / Virus Database: 461 - Release Date: 6/12/04

It's not there and a search of my C drive has come up with
0 results as well. Where do I go from here?

-----Original Message-----
I have AutoIt, and it shows up in the Control Panel
applet "Add/Remove
Programs". Try removing it from there.
HTH,

--
Curt--not the MVP by the same name

W98 Support & Discussion:
http://dundats.proboards27.com/index.cgi
Windows How-tos and and Freewa
http://mvps.org/PracticallyNerded/
Windows Help & Discussion:
http://forum.aumha.org/

wrote in message
...
Can you tell me how to uninstall this please?

-----Original Message-----
AutoIT is not a Windows component, it's a scripting
add-
on. I'd uninstall
it and see what happens to your problems then.

--
Richard G. Harper [MVP Win9x]
* PLEASE post all messages and replies in the
newsgroups
* for the benefit of all. Private mail is usually not
replied to.
* HELP us help YOU ... http://www.dts-
l.org/goodpost.htm


"AGS" wrote in
message
...
Since downloading Microsoft Critical updates my
computer
has been hanging at shutdown but despite trying
various
suggestions have not managed to solve this. I also
noticed that there are blank pages in Windows 98
troubleshooter. I have managed to get the
troubleshooter
back by using the quick fix posted in these
newsgroups,
however when I use the troubleshooter I am getting
the
Autolt Error box pop up with the following message
Line 24 WinWaitClose Error: The number of parameters
is
incorrect. Could this message relate to the shut
down
problem and if so how can I fix it? If someone could
explain this I would be very grateful.


.



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.705 / Virus Database: 461 - Release Date:
6/12/04


.

Then you are running a program or script that was compliled using =
AutoIt, and it is causing the error. You don't have to have AutoIt =
installed to get an AutoIt error.

the blank pages in the troubleshooter, there are two different =
fixes, depending on the Windows updates you have installed.
The original fix for the older update was this:
First, click Start Settings Folder Options View tab, and click to =
enable "Show All Files" and click OK.
Click Start Find File or Folders, and search the C:\ drive for a file =
named Tshoot.inf...it should be found in the \Windows\Inf folder.
Right-click Tshoot.inf and click Install on the menu that appears.

If the cumulative patch for Internet Explorer (November) is installed, =
there is only a workaround.
See he
http://home.comcast.net/~bascon58/98Help.htm
and
http://mvps.org/PracticallyNerded/SoftFixes.htm

Try the workaround, and see if the AutoIt error still appears.
--=20
Glen Ventura, MS MVP W95/98 Systems
http://dts-l.org/goodpost.htm


"AGS" wrote in message =
...
It's not there and a search of my C drive has come up with=20
0 results as well. Where do I go from here?
=20
-----Original Message-----
I have AutoIt, and it shows up in the Control Panel=20
applet "Add/Remove
Programs". Try removing it from there.
HTH,

--=20
Curt--not the MVP by the same name

W98 Support & Discussion:
http://dundats.proboards27.com/index.cgi
Windows How-tos and and Freewa
http://mvps.org/PracticallyNerded/
Windows Help & Discussion:
http://forum.aumha.org/

wrote in message
...
Can you tell me how to uninstall this please?

-----Original Message-----
AutoIT is not a Windows component, it's a scripting=20
add-
on. I'd uninstall
it and see what happens to your problems then.

--=20
Richard G. Harper [MVP Win9x]
* PLEASE post all messages and replies in the=20
newsgroups
* for the benefit of all. Private mail is usually not
replied to.
* HELP us help YOU ... http://www.dts-
l.org/goodpost.htm


"AGS" wrote in
message
...
Since downloading Microsoft Critical updates my=20
computer
has been hanging at shutdown but despite trying=20
various
suggestions have not managed to solve this. I also
noticed that there are blank pages in Windows 98
troubleshooter. I have managed to get the
troubleshooter
back by using the quick fix posted in these=20
newsgroups,
however when I use the troubleshooter I am getting=20
the
Autolt Error box pop up with the following message
Line 24 WinWaitClose Error: The number of parameters=20
is
incorrect. Could this message relate to the shut=20
down
problem and if so how can I fix it? If someone could
explain this I would be very grateful.


.



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.705 / Virus Database: 461 - Release Date:=20
6/12/04


.