A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows ME » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Help with logo.sys



 
 
Thread Tools Display Modes
  #1  
Old November 10th 05, 04:33 AM
Leysan
external usenet poster
 
Posts: n/a
Default Help with logo.sys

I installed a custom logo.sys file & it works ok...but it flashes by in
about 3 seconds. Barely enough time to view it. Is there a way to increase
the time it is displayed? Thanks for your help.


  #2  
Old November 10th 05, 05:38 AM
Shane
external usenet poster
 
Posts: n/a
Default Help with logo.sys

The time the bootup logo is displayed is hard-wired. The short display is
the consequence of having British settings. Not sure why this is so in ME,
but it is. On British versions it just flashes by. You can make it last
longer by setting Windows up (in MSConfig/International) as, eg, American,
but better to have a fully-working keyboard than a pretty bootup splash.

Shane


"Leysan" wrote in message
...
I installed a custom logo.sys file & it works ok...but it flashes by in
about 3 seconds. Barely enough time to view it. Is there a way to increase
the time it is displayed? Thanks for your help.




  #3  
Old November 10th 05, 05:48 AM
Sugien
external usenet poster
 
Posts: n/a
Default Help with logo.sys

I could be wrong but didn't they change logo.sys to sulogo.sys in ME?

"Leysan" wrote in message
...
I installed a custom logo.sys file & it works ok...but it flashes by in
about 3 seconds. Barely enough time to view it. Is there a way to increase
the time it is displayed? Thanks for your help.




--
VIA TITS (Teenager In Tennis Shoes)proxy of Sugien
/}
@###{ ]:::::ino-Soft Softwa:::::
\}
This post brought to you by Sneaker Net floppyware


  #4  
Old November 10th 05, 05:48 AM
siljaline
external usenet poster
 
Posts: n/a
Default Help with logo.sys

"Leysan" wrote:
I installed a custom logo.sys file & it works ok...but it flashes by in
about 3 seconds. Barely enough time to view it. Is there a way to increase
the time it is displayed? Thanks for your help.


While I don't have the answer to your query you could try several of these
in lieu - if any display sufficiently long enough on boot, then it would be
fair to assume that your customer logo doesn't like your set-up.
I've run these on my old Win 9x box many times without problems.
http://www.nucleus.com/~kmcmurdo/logos/

Good luck.

Silj

--
siljaline

MS - MVP Windows (IE/OE) & Security, AH-VSOP
_________________________________________
Security Tools Updates
http://aumha.net/viewforum.php?f=31

Reply to group, as return address
is invalid that we may all benefit.





  #5  
Old November 10th 05, 11:11 AM
Alan Edwards
external usenet poster
 
Posts: n/a
Default Help with logo.sys

No.
It is only stored as sulogo.sys in the .cab files in the CD, just as
it was in Win95 and Win98.

....Alan
--
Alan Edwards, MS MVP Windows - Internet Explorer
http://dts-l.org/index.html

On Wed, 9 Nov 2005 23:48:03 -0500, "Sugien"
wrote:

I could be wrong but didn't they change logo.sys to sulogo.sys in ME?

"Leysan" wrote in message
...
I installed a custom logo.sys file & it works ok...but it flashes by in
about 3 seconds. Barely enough time to view it. Is there a way to increase
the time it is displayed? Thanks for your help.


  #6  
Old November 10th 05, 10:48 PM
Sugien
external usenet poster
 
Posts: n/a
Default Help with logo.sys


"Alan Edwards" wrote in message
...
No.
It is only stored as sulogo.sys in the .cab files in the CD, just as
it was in Win95 and Win98.

hmmm, ok, I do however remember for the short time I used my WinME, that I
changed the boot up screen by placing a customized sulogo.sys in a certain
folder, the name of which is locked up in having a senior moment right now
s; but which I have stored somewhere in my archives of help snippets.



--
VIA TITS (Teenager In Tennis Shoes)proxy of Sugien
/}
@###{ ]:::::ino-Soft Softwa:::::
\}
This post brought to you by Sneaker Net floppyware


  #7  
Old November 10th 05, 10:54 PM
Mike M
external usenet poster
 
Posts: n/a
Default Help with logo.sys

The name of the file would have been logo.sys and the location the root of
C:\. No other name or location works.
--
Mike Maltby



Sugien wrote:

hmmm, ok, I do however remember for the short time I used my WinME,
that I changed the boot up screen by placing a customized sulogo.sys
in a certain folder, the name of which is locked up in having a
senior moment right now s; but which I have stored somewhere in my
archives of help snippets.


  #8  
Old November 10th 05, 11:36 PM
Leysan
external usenet poster
 
Posts: n/a
Default Help with logo.sys

Thanks Shane, that is what I was afraid of. BTW I have Canadian settings.
Might just try US settings & see what happens.


"Shane" wrote in message
...
The time the bootup logo is displayed is hard-wired. The short display is
the consequence of having British settings. Not sure why this is so in ME,
but it is. On British versions it just flashes by. You can make it last
longer by setting Windows up (in MSConfig/International) as, eg, American,
but better to have a fully-working keyboard than a pretty bootup splash.

Shane


"Leysan" wrote in message
...
I installed a custom logo.sys file & it works ok...but it flashes by in
about 3 seconds. Barely enough time to view it. Is there a way to

increase
the time it is displayed? Thanks for your help.






  #9  
Old November 11th 05, 12:07 AM
Sugien
external usenet poster
 
Posts: n/a
Default Help with logo.sys


"Mike M" wrote in message
...
The name of the file would have been logo.sys and the location the root of
C:\. No other name or location works.


I beg to differ; because I have put a sulogo.sys into the windowsME
instaliation I used for a short time, and it does work as the start up
screen. Maybe you are talking about a Win9x install? I remember it quite
well; because at the time I was a little miffed that I could not use all the
logo.sys files I had accumilated from win95-win98SE in my WindowsME machine.
It took me quite some searching to find out that Microsoft had changed it
for WinME to sulogo.sys. One of the first things I tried was to do a system
file search for logo.sys, and when I didn't find it I figured they had done
the same as in Win98SE and hidden it inside a .dll and that simply putting a
logo.sys into the proper folder would overide the default and then removing
it would allow it to resume to the default logo.sys
I was also around that same time however playing about with a free
copy of Win2K I had received at the Feb17th launch of Win2K in Columbus,
Ohio in Feburary 2000, the same one at which I got a low of SWAG (Software
and Gifts) including a Win2K T-Shirt shrink wrapped to look like a flying
window logo, which I still have unopened. Microsoft got even more shall I
say sneeky with WinXP by hiding the start up screen inside ntoskrnl.exe and
you need to use a resorce editor (I reommend res hacker because it is not
only an adaquate one but free) to change it.
As I said earler I can only guess you are talking about a Win9x
machine and logo.sys; because any compent MVP or better yet a MCP (Microsoft
Certified Professional - because one has to test to be a MCP; but a MVP is
just an elected cudos type of honor) will tell you the same info I have
about sulogo.sys and WinME.

HTH


--
VIA TITS (Teenager In Tennis Shoes)proxy of Sugien
/}
@###{ ]:::::ino-Soft Softwa:::::
\}
This post brought to you by Sneaker Net floppyware


--
Mike Maltby



Sugien wrote:

hmmm, ok, I do however remember for the short time I used my WinME,
that I changed the boot up screen by placing a customized sulogo.sys
in a certain folder, the name of which is locked up in having a
senior moment right now s; but which I have stored somewhere in my
archives of help snippets.




  #10  
Old November 11th 05, 12:50 AM
Noel Paton
external usenet poster
 
Posts: n/a
Default Help with logo.sys

In ME the logo.sys is hardcoded into the IO.SYS (IIRC) - you can use any
(suitably modified) bmp file and rename it to logo.sys, and this will
override the default.
sulogo.sys is the logo that ME uses during the initial Setup phase, and is
not present 'live' in the OS - and can be deleted if it is present.
Perhaps you've forgotten that ME is a Win9x OS??

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"Sugien" wrote in message
...

"Mike M" wrote in message
...
The name of the file would have been logo.sys and the location the root
of C:\. No other name or location works.


I beg to differ; because I have put a sulogo.sys into the windowsME
instaliation I used for a short time, and it does work as the start up
screen. Maybe you are talking about a Win9x install? I remember it quite
well; because at the time I was a little miffed that I could not use all
the logo.sys files I had accumilated from win95-win98SE in my WindowsME
machine. It took me quite some searching to find out that Microsoft had
changed it for WinME to sulogo.sys. One of the first things I tried was
to do a system file search for logo.sys, and when I didn't find it I
figured they had done the same as in Win98SE and hidden it inside a .dll
and that simply putting a logo.sys into the proper folder would overide
the default and then removing it would allow it to resume to the default
logo.sys
I was also around that same time however playing about with a free
copy of Win2K I had received at the Feb17th launch of Win2K in Columbus,
Ohio in Feburary 2000, the same one at which I got a low of SWAG (Software
and Gifts) including a Win2K T-Shirt shrink wrapped to look like a flying
window logo, which I still have unopened. Microsoft got even more shall I
say sneeky with WinXP by hiding the start up screen inside ntoskrnl.exe
and you need to use a resorce editor (I reommend res hacker because it is
not only an adaquate one but free) to change it.
As I said earler I can only guess you are talking about a Win9x
machine and logo.sys; because any compent MVP or better yet a MCP
(Microsoft Certified Professional - because one has to test to be a MCP;
but a MVP is just an elected cudos type of honor) will tell you the same
info I have about sulogo.sys and WinME.

HTH


--
VIA TITS (Teenager In Tennis Shoes)proxy of Sugien
/}
@###{ ]:::::ino-Soft Softwa:::::
\}
This post brought to you by Sneaker Net floppyware


--
Mike Maltby



Sugien wrote:

hmmm, ok, I do however remember for the short time I used my WinME,
that I changed the boot up screen by placing a customized sulogo.sys
in a certain folder, the name of which is locked up in having a
senior moment right now s; but which I have stored somewhere in my
archives of help snippets.






 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Where does does the startup logo in Win98 come from Anil Bhattacharji General 10 April 18th 05 03:01 AM
Why no TIF directory seen in DOS? Jack General 33 January 24th 05 05:09 AM
missing a file grasshopper General 4 December 7th 04 03:17 PM
Windows 98 start-up David General 6 July 5th 04 05:51 AM


All times are GMT +1. The time now is 09:47 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.