A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows ME » Printing
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

printer driver



 
 
Thread Tools Display Modes
  #1  
Old June 12th 04, 10:02 PM
Chuck
external usenet poster
 
Posts: n/a
Default printer driver

Actually, MS wrote drivers for some of the early color printers by Cannon
and HP. If you look at the driver package with hex/binary editors and so
forth, it's obvious. The drivers tend to be written for MS "windows printing
system", that was, as you mentioned, intended for early windows and possibly
NT versions. Later versions of windows accepted the drivers, and if the
install of the later windows version was an upgrade install, also "upgraded"
the windows printing system. The main purpose seemed to be to add printer
monitoring capability. Some of the features were later stripped out, due to
high user problem rates.
The HP 820 and the Canon 620 were examples of printer that originally used
the win print system. Later Canon released a simplified and reliable
printer driver for the 620. This driver worked well, was compatable with lan
printing, and had minimal printer monitoring. It did not use the "windows
printing system" driver structure.

These days, the printers are quite stupid, and require extensive software
support. The printer OEM usually is the only source for the drivers, since
the details of how the printer works are not fully released to the outside
developers.

For instance, a new Epson model I just purchased has an advertized
capability of printing at a very high dot density. Yet the information
released to developers only defines the highest available documented density
as 720.

MS was also known for not fully documenting the application to printer
driver software. That added to various changes and limited legacy support
made printer driver development more complex than it really should be. Even
today, some of the MS office applications are still not consistent in how an
application uses the system software to print. Things have improved
greatly, however many of the older printer driver packages get broken when a
seemingly unrelated change is made to a windows module.

One of many little oddities has to do with what happens in the spooling
process.
The output file from an application is not printer ready. The printer driver
must convert the data to something that eventually is a combination of
printer command data, corrected color data, and whatever else is needed. The
data is stored in a series of files during the process, some of which are
usually temporary files, and others are spooler files. Some applications
seem to generate a complete graphics image of a page, and others generate
some sort of compressed version. Three windows office apps, (word, excel,
and publisher) seem to use different methods of interfacing with the printer
drivers.

MS did in fact "create a monster"



"Noel Paton" wrote in message
...
...and as Cari said, they don't write drivers! - they test them, and if

they
pass the tests, then they get included in the OS, at RTM time, or in

Windows
Update (if required to fix a bug only). AFAIK, MS has not written (or
perhaps that should be 'released their own') drivers for any printers

since
the days of Win3.x.
MS writes the software that converts program output to a driver-readable
form, and that's it!

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp
"Chuck" wrote in message
...
Actually, what I said was that they (MS) has written printer drivers in

the
past on a selective basis.

"Noel Paton" wrote in message
...
Chuck - I think you missed the operative phrase in Cari's post

"Microsoft isn't responsible for writing drivers for other

manufacturer's
hardware products."

i.e MS don't write drivers!!


--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to

NG's

"Chuck" wrote in message
...
The drivers MS wrote for the HP 820 and the Canon 620 (win print

drivers)
were not drivers that I would consider as among the best. (Gave the

820
back
to the store and used an international version for the 620)
In the past, drivers furnished on the windows CDs for various

printers
were
very basic, and often had problems of one kind or another.

I'd guess that there have been so many changes that it's hard to

keep
everything in sync.
(Windows Version with updates, applications, video drivers and DX,

etc.)

(And to think that a dos printer driver could be written in a few

days
with
an assembler and a bit of knowledge.)

"Cari (MS-MVP)" wrote in message
...
Microsoft isn't responsible for writing drivers for other

manufacturer's
hardware products.

Cari
www.coribright.com

"Gaetan" wrote in message
...

-----Original Message-----
When I had Windows 98 I had no problem running my Canon
BJC 4400 series inkjet printer. Since I had to switch to
Windows ME I've had to go to an alternate printer driver
to get the thing to work. Is there anyone out there who
knows why and if microsoft has not the driver then who
does? I'm not about to spend money on another printer
when
there is nothing wrong with the one I've already got,
except the blasted driver!
.
I don't have a solution for you but I know what you feel
like as I have the same dam problem with my printer.
Cheers!












 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
printer driver saul kramer Printing 1 July 17th 04 03:40 PM
Please help! Display settings !! Mitzi Monitors & Displays 12 July 11th 04 05:19 AM
How do I print to TCPIP connected printer from Win98? Al Dykes Networking 0 June 6th 04 04:13 PM
help: seeking digital (dec) printer driver for LN-15 b Printing 3 June 6th 04 03:30 AM
share a printer on WIN98 Blair Networking 5 June 1st 04 05:43 PM


All times are GMT +1. The time now is 02:29 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.