If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
invalid hibernation partition/file????
Ok I broke down and tried something.
I took the HD out of the laptop, not a big deal, but not sure how to install in desktop. One thing there are no power hookups and the cable connections look smaller than the adapter plugs in my desktop. This 30 gig Toshiba HD is small.... "Gary S. Terhune" none wrote in message ... Well here's where we a Everything I can find on this message, which is common to many laptops that use the same Hibernation system... All roads lead to those same instructions you already tried. The file that the message suggests you run, if you could read the whole message, is "HDPREP (or HDPREPEZ), or 'AMI Save to File Utility'". That would prepare the hard drive by creating a special partition to hold Hibernation data. But you have to prep the HD *before* you turn on the feature, and you have to turn off the feature to make it let you boot if the HD isn't prepped properly. In short, I'm not sure I can take you any farther. If there is no possible power management option that fits the bill, I have to wonder if someone tried to update the BIOS and screwed up. I dunno, nothing quite makes sense. All I know is that it's the BIOS that's holding you up, and it's holding you up because it can't find the hibernation partition. Hmmm... I suppose you could try taking out the HD, putting it into a desktop, and run the HDPREP program, then put it back in the laptop. Would be a complicated operation (gotta make sure only the laptop HD gets "prepped", which might mean having to disable the rest of the HDs in the machine and use a bootable floppy setup disk to run the HDPREP utility. But it all comes back to BIOS should have that setting, and if it doesn't, nothing makes sense. Sorry, but I don't think I could come up with anything else without the machine in front of me. I'd want to take the disk out and put it into another machine to see what partitions there are, and I'd want to positively identify the motherboard and determine if it was possible to find a BIOS version for it that has the proper settings... Just doesn't make any sense. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L." wrote in message ... Sorry for the delays, work. Not sure exactly what make this thing is.No markings on case. The only info is on a plate on bottom of system and it's stated "Personal Computer Model No. N340S8". Another problem is that this was donated and they isn't any disks, etc. that came with it. "Gary S. Terhune" none wrote in message ... What is the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L." wrote in message ... Followed your instructions but still no go. I went into BIOS and set floopy to be "1st Boot Device", inserted floppy and restarted system. After intitial startup, goes straight to error msg. "Gary S. Terhune" none wrote in message ... You run BOOTITNG.EXE on the system you used to download it, and it make's its own bootable floppy (or CD.) You then put that floppy in the problem machine and boot to it. Once it finishes loading, the first dialogue you get will be to install BootIt NG (BING) and that's where you Cancel the installation. Sorry for the less than clear instructions. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Here's what I've got. D/L and copied to a floppy BootItng.exe. (had to d/l on another system) Made a bootable floppy when I installed Win98se. Problem is, Iv'e set BIOS to read floppy 1st, Cd 2nd and then HD but this system isn't following instructions. When the system starts, I can't hear either disk running and then I get error msg. I'm confused, when you say to make a bootable floopy unless you're taking about something other than the one I create with win98se. Also, run Bootitng.exe--- how when the system locks up even though I have the bootable floopy in the drive. "Gary S. Terhune" none wrote in message ... Sorry, that download from BootIt NG is a ZIP file. Unzip that to a new folder and then run BOOTITNG.EXE file in that folder. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "Gary S. Terhune" none wrote in message ... My suggestion is to get a copy of BootIt NG from www.bootitng.com. No need to pay, just download the EXE, make a bootable floppy or CD installer, reboot to the floppy or CD and then CANCEL THE INSTALLATION! That will drop you into Maintenance Mode where you can choose Partition Work. See what's listed there in the middle panel. More than just the one partition where you installed Win98? If so, please list them for us here, including name, size, type. What's the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Followed link. Problem is there is no such option. Nothing looks close to an auto Save-to-file option. "Gary S. Terhune" none wrote in message ... See he http://www.cybertechhelp.com/forums/...ad.php?t=33474 Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
your hibernation file is missing or corrupted... | Jetson | General | 1 | February 6th 06 11:01 AM |
Hibernation | RMV | General | 3 | March 12th 05 08:09 PM |
Hibernation? | someone | General | 1 | September 26th 04 04:59 PM |
Hibernation | someone | General | 1 | September 25th 04 02:39 AM |
How to force driver to remount file system, when content of raw partition has changed?? | Egorov Dmitry | Disk Drives | 1 | July 20th 04 08:19 PM |