PCR -here

He is DRV_2 (E:\) His Compact Disc is Drive F

[boot loader]
timeout = 30
default = multi(0)disk(0)rdisk(0)partition(0)\WINNT
multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000
Professional" /fastdetect
C:\ = "Microsoft Windows"

the BOOT.INI have to go in to C:\ to work

With

ntdr
NTDETECT.COM

Hot-Text wrote:
He is DRV_2 (E:\) His Compact Disc is Drive F

[boot loader]
timeout = 30
default = multi(0)disk(0)rdisk(0)partition(0)\WINNT

I think you left out...
[operating systems]

multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000

I think you meant...
multi(0)disk(0)rdisk(1)partition(0)\WINNT = "Microsoft Windows 2000"

Professional" /fastdetect
C:\ = "Microsoft Windows"

the BOOT.INI have to go in to C:\ to work

That's true, I think. But I'm no expert in this. So, you've got two
drives. Both have W2K. one is letter C: for sure, & the other you say is
E:. The choices this Boot.ini offers are...

"Microsoft Windows"
"Microsoft Windows 2000"

OK, then.


With

ntdr
NTDETECT.COM

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR

Mr. PCR

For legg have
Drv 1 Vol _1 & 2
Drv 2

C is 98 or 0,0,0,1
if you add a partition
D is know Body or 0,0,0,2
if you add a Head Drive
E is 2000 or 0,1,0,0
F is 1 CD/DVD -Rom or 1,0,0,0
if you add a CD/DVD -Rom
G is 2 DVD -Rom or 2,0,0,0

if you Can add a partitions in CD/DVD
And it would be 2 DVD -Rom on partition or 2,0,0,2

You can not make 2000 work on D when know Body have it First!
You can Rename the Drives letter it's just a title ..
When COS set the Drives it give it no Titles, but give Orders out as
info::0, have 2, 0, have 2, 1 have 0,

DOS did the Mathematic at setup or install!
(Default) 1 multi is (0) or (IDE) 1 disk or drv is (0) X 1 partition or vol
is (0)

(Note: (C:) (D:\) all the way to (Z:\) or Titles of or Start names in
Software mapping!

IDE DRV # VOL #
multi 1 disk 1 partition 1 (0,0,0,1) C
multi 1 disk 1 partition 2 (0.0,0,2) D
multi 1 disk 2 partition 0 (0,1,0,0) E
multi 2 disk 1 partition 0 (1,0,0,0) DVD or CD = F

If he put a Windows 2000 disk that was install on C:\ it map to (0,0,0,1)
or D:\ it map to (0.0,0,2) he Broking up the wrong tree!
For he is trying to run on (0,1,0,0) E and 2000 is not Map to work there!
If 2000 install on D:/ he have to Delete D:\ from Win 98 Disk So 2000 can
run on D:(0,1,0,0) D


"Hot-Text" wrote in message
...
He is DRV_2 (E:\) His Compact Disc is Drive F

[boot loader]
timeout = 30
default = multi(0)disk(0)rdisk(0)partition(0)\WINNT
multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000
Professional" /fastdetect
C:\ = "Microsoft Windows"

the BOOT.INI have to go in to C:\ to work

With

ntdr
NTDETECT.COM

ok you right I **** you!

I'll do to make a Win 98 Disk and a win 2000 Disk Drive PC
today and give it right!

LOOL

On Mon, 15 Nov 2010 00:43:00 -0600, "Hot-Text"
wrote:

Mr. PCR

For legg have
Drv 1 Vol _1 & 2
Drv 2

C is 98 or 0,0,0,1
if you add a partition
D is know Body or 0,0,0,2
if you add a Head Drive
E is 2000 or 0,1,0,0
F is 1 CD/DVD -Rom or 1,0,0,0
if you add a CD/DVD -Rom
G is 2 DVD -Rom or 2,0,0,0

if you Can add a partitions in CD/DVD
And it would be 2 DVD -Rom on partition or 2,0,0,2

You can not make 2000 work on D when know Body have it First!
You can Rename the Drives letter it's just a title ..
When COS set the Drives it give it no Titles, but give Orders out as
info::0, have 2, 0, have 2, 1 have 0,

DOS did the Mathematic at setup or install!
(Default) 1 multi is (0) or (IDE) 1 disk or drv is (0) X 1 partition or vol
is (0)

(Note: (C:) (D:\) all the way to (Z:\) or Titles of or Start names in
Software mapping!

IDE DRV # VOL #
multi 1 disk 1 partition 1 (0,0,0,1) C
multi 1 disk 1 partition 2 (0.0,0,2) D
multi 1 disk 2 partition 0 (0,1,0,0) E
multi 2 disk 1 partition 0 (1,0,0,0) DVD or CD = F

If he put a Windows 2000 disk that was install on C:\ it map to (0,0,0,1)
or D:\ it map to (0.0,0,2) he Broking up the wrong tree!
For he is trying to run on (0,1,0,0) E and 2000 is not Map to work there!
If 2000 install on D:/ he have to Delete D:\ from Win 98 Disk So 2000 can
run on D:(0,1,0,0) D


"Hot-Text" wrote in message
...
He is DRV_2 (E:\) His Compact Disc is Drive F

[boot loader]
timeout = 30
default = multi(0)disk(0)rdisk(0)partition(0)\WINNT
multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000
Professional" /fastdetect
C:\ = "Microsoft Windows"

the BOOT.INI have to go in to C:\ to work

With

ntdr
NTDETECT.COM


Do you actually use any of the installations that you're talking
about?

RL

YES
But I need to Test it a out a gin!
to see if I remembered it right!

so I'll do a Window 98 install today on:
Disk ! Vol 1 & 2
Win 98 be in Vol

I do Sec. Disk with a one Vol
on the same Computer.

Just to Check it out, For it been two years a go when I do two Disk!
And I will Post it Boot.ini Here!

Activating the MSHTML Editor!
http://hot-text.ath.cx/new.html

On 11/15/2010 9:41 AM, legg wrote:
On Mon, 15 Nov 2010 00:43:00 -0600, "Hot-Text"
wrote:

Mr. PCR

For legg have
Drv 1 Vol _1& 2
Drv 2

C is 98 or 0,0,0,1
if you add a partition
D is know Body or 0,0,0,2
if you add a Head Drive
E is 2000 or 0,1,0,0
F is 1 CD/DVD -Rom or 1,0,0,0
if you add a CD/DVD -Rom
G is 2 DVD -Rom or 2,0,0,0

if you Can add a partitions in CD/DVD
And it would be 2 DVD -Rom on partition or 2,0,0,2

You can not make 2000 work on D when know Body have it First!
You can Rename the Drives letter it's just a title ..
When COS set the Drives it give it no Titles, but give Orders out as
info::0, have 2, 0, have 2, 1 have 0,

DOS did the Mathematic at setup or install!
(Default) 1 multi is (0) or (IDE) 1 disk or drv is (0) X 1 partition or vol
is (0)

(Note: (C:) (D:\) all the way to (Z:\) or Titles of or Start names in
Software mapping!

IDE DRV # VOL #
multi 1 disk 1 partition 1 (0,0,0,1) C
multi 1 disk 1 partition 2 (0.0,0,2) D
multi 1 disk 2 partition 0 (0,1,0,0) E
multi 2 disk 1 partition 0 (1,0,0,0) DVD or CD = F

If he put a Windows 2000 disk that was install on C:\ it map to (0,0,0,1)
or D:\ it map to (0.0,0,2) he Broking up the wrong tree!
For he is trying to run on (0,1,0,0) E and 2000 is not Map to work there!
If 2000 install on D:/ he have to Delete D:\ from Win 98 Disk So 2000 can
run on D:(0,1,0,0) D


wrote in message
...
He is DRV_2 (E:\) His Compact Disc is Drive F

[boot loader]
timeout = 30
default = multi(0)disk(0)rdisk(0)partition(0)\WINNT
multi(0)disk(1)rdisk(0)partition(0)\WINNT = "Microsoft Windows 2000
Professional" /fastdetect
C:\ = "Microsoft Windows"

the BOOT.INI have to go in to C:\ to work

With

ntdr
NTDETECT.COM


Do you actually use any of the installations that you're talking
about?

I rather doubt it, none of the ARC paths in his posted boot.ini point to
anything! The partitions always start at 1 and the disk() parameter is
only used with scsi disks, for other installations it is always disk(0)...

John

Hot-Text wrote:
ok you right I **** you!

Hey! I've got hemorrhoids!

I'll do to make a Win 98 Disk and a win 2000 Disk Drive PC
today and give it right!

OK, then. But if anything bad happens, it's on your head! I said, I'm no
big expert with Boot.ini's!


LOOL

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR

I install 98 on disk 0 partition 2
install 2000 on disk 1 partition
it may this Book.ini

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(1)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINNT="Windows 2000" /fastdetect
c:\ = "Window 98"


All night job it was but it Works
PCP & legg

Big Bertha Thing Halfrail
Cosmic Ray Series
Possible Real World System Constructs
http://www.bigberthathing.com/halfrail.html
Access page JPG 22K Image
Astrophysics net ring access site
Newsgroup Reviews including uk.rec.gardening

Detail in photgraph of a model of Track on the Bottom Monorail Half.

Caption;-
Schilowsky's Monorail Car.

Extract from Chapter V;-
73. Another ingenious application of the gyroscope to a monorail car
has lately (Feb., 1914) been made by Monsieur Schilowsky, a Russian
inventor.....

So far as experiments have gone at present the weight of the gyroscope
is designed to be something between 1/10th and 1/25th of the whole
weight of the car, while the two pendulums together are about 1/3rd
of the weight of the gyroscope.

The author is indebted to M. Schilosky both for the diagrams and the
photograph from which plate IV has been made. A model of the car has
been presented by the inventor to the Science Museum at South
Kensington and can be viewed by the public at anytime. An article
on this monorail is to be found in the issue of The Engineer
for January 23, 1914.

From the book
An Elementary Treatment of the Theory of
Spinning Tops and Gyroscopic Motion.
By Harold Crabtree M.A.
Formerly Scholar of Pembroke College, Cambridge
Assistant Master at Charterhouse
Longmans, Green and Co. 1923
First Edition 1909
Second Edition 1914
New Impression 1923
(C) Copyright Tony Lance 1998
Distribute complete and free of charge to comply.


Big Bertha Thing handbook

1. Handbook thread one posting long.
2. Correctly attributed.
3. Professional.
4. Steet savvy.
5. Well read.
6. Appropriate.
7. Source softly spoken.
8. Solitary.
9. More Sesame Street than Darth Vader.
10. Optional, optimal and optical.

Tony Lance

++++++++++++++++++++++++++++++++++++++++++++++++++ +
---------- Forwarded message ----------
From: "Dave Patrick"
Date: May 8, 7:20*pm
Subject: RIP Tony Lance
To: microsoft.public.windowsnt.setup
---------- Forwarded message ----------
From: NT Guy
Date: May 10, 1:40*pm
Subject: RIP Tony Lance
To: microsoft.public.windowsnt.setup
++++++++++++++++++++++++++++++++++++
Newsgroups: microsoft.public.windowsnt.setup
From: John John - MVP
Date: Sun, 14 Nov 2010 09:31:12 -0400
Local: Sun, Nov 14 2010 1:31 pm
Subject: RIP Tony Lance
---------- Forwarded message ----------
From: "Paul Pedersen"
Date: Mar 23 2009, 10:56*pm
Subject: Windows Firewall blocking SQL Server
To: microsoft.public.sqlserver.server,
microsoft.public.windows.server.general


Thanks.

"Dave Patrick" wrote in message
---------- Forwarded message ----------
From: "Paul Pedersen"
Date: Apr 3 2004, 9:44*pm
Subject: Problem with printing in VFP8
To: microsoft.public.fox.vfp.dbc
---------- Forwarded message ----------
From: (Paul Pedersen)
Date: Jul 2 1993, 8:26*pm
Subject: Solving quintics and higher
To: sci.math
---------- Forwarded message ----------
From: (paul pedersen)
Date: Apr 18 1990, 5:57*am
Subject: A brief survey.
To: sci.physics

++++++++++++++++++++++++++++++++++++++++
On Nov 15, 4:52*pm, John John - MVP wrote:
On 11/15/2010 9:41 AM, legg wrote: