If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
I've successfuly installed a network printserver connected to the parallel
port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. -- Warren No spam address used. Please reply to group only. |
#2
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
I thought I had a bright idea of caturing the LPT1 port in the print driver
and redirecting to the network server port, but for some reason that doesn't seem to work. "Warren" wrote in message ... I've successfuly installed a network printserver connected to the parallel port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. -- Warren No spam address used. Please reply to group only. |
#3
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
I thought I had a bright idea of caturing the LPT1 port in the print driver
and redirecting to the network server port, but for some reason that doesn't seem to work. "Warren" wrote in message ... I've successfuly installed a network printserver connected to the parallel port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. -- Warren No spam address used. Please reply to group only. |
#4
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
In article , "Warren"
wrote: I've successfuly installed a network printserver connected to the parallel port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. Why not try it and see? So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. You could connect the printer directly to the parallel port, install it as a local printer, then connect the print server and change the printer's port assignment. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#5
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
In article , "Warren"
wrote: I've successfuly installed a network printserver connected to the parallel port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. Why not try it and see? So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. You could connect the printer directly to the parallel port, install it as a local printer, then connect the print server and change the printer's port assignment. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#6
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
Yes I did that, my printer driver was installed to print to LPT1 and I tried
to caputure LPT1 to my network print server port \\192.168.0.10\ps-xxxxxx-p1 , but no joy. I assume that's what you meant It seems there may be a basic incompatibility of the print server(D-Link DP-G301) with my printer (HP Deskjet 722C). I'm thinking this because I can log into my print server and perform a print test and it won't print the test page. Seems like that is where the problem lies. "Steve Winograd [MVP]" wrote in message ... In article , "Warren" wrote: I've successfuly installed a network printserver connected to the parallel port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. Why not try it and see? So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. You could connect the printer directly to the parallel port, install it as a local printer, then connect the print server and change the printer's port assignment. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#7
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
Yes I did that, my printer driver was installed to print to LPT1 and I tried
to caputure LPT1 to my network print server port \\192.168.0.10\ps-xxxxxx-p1 , but no joy. I assume that's what you meant It seems there may be a basic incompatibility of the print server(D-Link DP-G301) with my printer (HP Deskjet 722C). I'm thinking this because I can log into my print server and perform a print test and it won't print the test page. Seems like that is where the problem lies. "Steve Winograd [MVP]" wrote in message ... In article , "Warren" wrote: I've successfuly installed a network printserver connected to the parallel port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. Why not try it and see? So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. You could connect the printer directly to the parallel port, install it as a local printer, then connect the print server and change the printer's port assignment. -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#8
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
In article , "Warren"
wrote: I've successfuly installed a network printserver connected to the parallel port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. Why not try it and see? So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. You could connect the printer directly to the parallel port, install it as a local printer, then connect the print server and change the printer's port assignment. Yes I did that, my printer driver was installed to print to LPT1 and I tried to caputure LPT1 to my network print server port \\192.168.0.10\ps-xxxxxx-p1 , but no joy. I assume that's what you meant It seems there may be a basic incompatibility of the print server(D-Link DP-G301) with my printer (HP Deskjet 722C). I'm thinking this because I can log into my print server and perform a print test and it won't print the test page. Seems like that is where the problem lies. I don't think that Windows 98 can access a print server using its IP address. Windows XP can, through a "Standard TCP/IP Port". If the print server supports Windows 98, it should have come with software that you can install and run to create a new port that uses the print server. Windows 98 isn't listed on this D-Link DP-G301 web page, however: http://support.dlink.com/products/vi...ctid=DP%2DG301 -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#9
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
In article , "Warren"
wrote: I've successfuly installed a network printserver connected to the parallel port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. Why not try it and see? So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. You could connect the printer directly to the parallel port, install it as a local printer, then connect the print server and change the printer's port assignment. Yes I did that, my printer driver was installed to print to LPT1 and I tried to caputure LPT1 to my network print server port \\192.168.0.10\ps-xxxxxx-p1 , but no joy. I assume that's what you meant It seems there may be a basic incompatibility of the print server(D-Link DP-G301) with my printer (HP Deskjet 722C). I'm thinking this because I can log into my print server and perform a print test and it won't print the test page. Seems like that is where the problem lies. I don't think that Windows 98 can access a print server using its IP address. Windows XP can, through a "Standard TCP/IP Port". If the print server supports Windows 98, it should have come with software that you can install and run to create a new port that uses the print server. Windows 98 isn't listed on this D-Link DP-G301 web page, however: http://support.dlink.com/products/vi...ctid=DP%2DG301 -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
#10
|
|||
|
|||
How do I install the Deskjet 722C driver to function as a network printer rather than a dedicated PC parallel port printer
Thank you for your response.
The DP-G301 definitely supports Win98. The manual has a whole section on how to create a network printer port and add a printer driver with Win98. Everything works well except when it comes to the Add Printer wizard. The HP driver will not allow itself to be installed by the Add Print wizard. HP insists that you use their HPsetup.exe program to install the print driver, but unfortunately their software does not permit the entry of a network port. The print driver that is created by HP in Win98 does allow for LPT port capture, which I assigned to my previouly configured print server port. There may be a problem with the above procedure but what bothers me even more is that I can't get the print server itself to talk through the parallel port to the HP 722C that it is plugged in to. I think if that doesn't work, then nothing else matters ? "Steve Winograd [MVP]" wrote in message news In article , "Warren" wrote: I've successfuly installed a network printserver connected to the parallel port of my printer, but I'm stuck at the last step of installing the printer driver for the printer. I can define the printer port on the network but when I go to install the printer driver using the Printer Wizard, my Windows 98SE doesn't have the Deskjet 722C driver, so I have to select "Have Disk". When I insert the HP disk it finds the driver on the disk but won't let me install the driver, saying I have to install the printer driver using the setup.exe file. Unfortunately the HP setup.exe only seems to provide options for connecting through my PC's parallel port and gives no option for driving through a network connection. I could try typing in the network port name over the LPT1 name in the HPsetup.exe wizard, but I have my doubts the HP wizard will accept it. Why not try it and see? So close but so far. Anybody got any suggestions on where I can get a printer driver for an HP Deskjet 722C that will allow me to install through the Add Printer Wizard. Or is there another way around this problem I think I have. Thanks in advance for your time. You could connect the printer directly to the parallel port, install it as a local printer, then connect the print server and change the printer's port assignment. Yes I did that, my printer driver was installed to print to LPT1 and I tried to caputure LPT1 to my network print server port \\192.168.0.10\ps-xxxxxx-p1 , but no joy. I assume that's what you meant It seems there may be a basic incompatibility of the print server(D-Link DP-G301) with my printer (HP Deskjet 722C). I'm thinking this because I can log into my print server and perform a print test and it won't print the test page. Seems like that is where the problem lies. I don't think that Windows 98 can access a print server using its IP address. Windows XP can, through a "Standard TCP/IP Port". If the print server supports Windows 98, it should have come with software that you can install and run to create a new port that uses the print server. Windows 98 isn't listed on this D-Link DP-G301 web page, however: http://support.dlink.com/products/vi...ctid=DP%2DG301 -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Please post any reply as a follow-up message in the news group for everyone to see. I'm sorry, but I don't answer questions addressed directly to me in E-mail or news groups. Microsoft Most Valuable Professional - Windows Networking http://mvp.support.microsoft.com Steve Winograd's Networking FAQ http://www.bcmaven.com/networking/faq.htm |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Install Printer Driver Without Win98SE System CD | Brad | General | 5 | October 22nd 06 12:19 AM |
Un-install HP Deskjet 870Cse printer | PSRumbagh | General | 1 | August 1st 05 01:08 PM |
Network Printer port resets on boot up | Lou Splen | Networking | 0 | February 6th 05 09:03 PM |
Need to install a TCP/IP Printer Port | SNdg68 | Printing | 3 | January 6th 05 02:13 AM |
Printing problem to virtual printer port (Canon ir3100c)/How to delete virtual printer port? | [email protected] | Printing | 0 | December 17th 04 03:21 PM |