A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Multiple ! flags for IDE controller devices? And CD-ROM problem



 
 
Thread Tools Display Modes
  #1  
Old August 14th 06, 03:39 PM posted to microsoft.public.win98.gen_discussion
john
External Usenet User
 
Posts: 15
Default Multiple ! flags for IDE controller devices? And CD-ROM problem

Installing an internal modem on my ThinkPad wrought havoc throughout my
drivers.

Now W98 SE doesn't recognize my CD ROM drive. It's not listed in
Device Manager.

Could this have anything to do with multple ! flags related to IDE
controllers? Here's what Device Manager shows:

Hard disk controllers:

-- Intel 82371AB/EB PCI Bus Master IDE Controller
-- ! Primary IDE controller (dual fifo)
-- ! Secondary IDE controller (single fifo)
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard IDE/ESDI Hard Disk Controller

My system has a single 4GB internal HD. I also use a USB external HD,
but the USB
connection isn't working either (but first things first--my immediate
priority is to restore
the CD ROM drive).

Thanks in advance.
--
John

  #2  
Old August 14th 06, 04:02 PM posted to microsoft.public.win98.gen_discussion
Haggis
External Usenet User
 
Posts: 325
Default Multiple ! flags for IDE controller devices? And CD-ROM problem



"john" wrote in message
ups.com...
Installing an internal modem on my ThinkPad wrought havoc throughout my
drivers.

Now W98 SE doesn't recognize my CD ROM drive. It's not listed in
Device Manager.

Could this have anything to do with multple ! flags related to IDE
controllers? Here's what Device Manager shows:

Hard disk controllers:

-- Intel 82371AB/EB PCI Bus Master IDE Controller
-- ! Primary IDE controller (dual fifo)
-- ! Secondary IDE controller (single fifo)
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard IDE/ESDI Hard Disk Controller

My system has a single 4GB internal HD. I also use a USB external HD,
but the USB
connection isn't working either (but first things first--my immediate
priority is to restore
the CD ROM drive).

Thanks in advance.
--
John


boot into "safe mode" and delete these

-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard IDE/ESDI Hard Disk Controller

reboot and let us know what happens ...


  #3  
Old August 14th 06, 08:12 PM posted to microsoft.public.win98.gen_discussion
Mart
External Usenet User
 
Posts: 1,190
Default Multiple ! flags for IDE controller devices? And CD-ROM problem

Are you sure that you didn't dislodge any of the ribbon cables, both at the
CD-ROM/HDD ends and/or the motherboard ends when you attempted to fit the
modem. Make sure that the plugs are firmly pushed home at BOTH ends of the
cables.

Mart


"john" wrote in message
ups.com...
Installing an internal modem on my ThinkPad wrought havoc throughout my
drivers.

Now W98 SE doesn't recognize my CD ROM drive. It's not listed in
Device Manager.

Could this have anything to do with multple ! flags related to IDE
controllers? Here's what Device Manager shows:

Hard disk controllers:

-- Intel 82371AB/EB PCI Bus Master IDE Controller
-- ! Primary IDE controller (dual fifo)
-- ! Secondary IDE controller (single fifo)
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard IDE/ESDI Hard Disk Controller

My system has a single 4GB internal HD. I also use a USB external HD,
but the USB
connection isn't working either (but first things first--my immediate
priority is to restore
the CD ROM drive).

Thanks in advance.
--
John



  #4  
Old August 15th 06, 02:30 AM posted to microsoft.public.win98.gen_discussion
glee
External Usenet User
 
Posts: 2,458
Default Multiple ! flags for IDE controller devices? And CD-ROM problem

I need a clarification here. All the Thinkpads I have seen are laptop
computers.....exactly how did you install an *internal* modem in a laptop?
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/goodpost.htm


"john" wrote in message
ups.com...
Installing an internal modem on my ThinkPad wrought havoc throughout my
drivers.

Now W98 SE doesn't recognize my CD ROM drive. It's not listed in
Device Manager.

Could this have anything to do with multple ! flags related to IDE
controllers? Here's what Device Manager shows:

Hard disk controllers:

-- Intel 82371AB/EB PCI Bus Master IDE Controller
-- ! Primary IDE controller (dual fifo)
-- ! Secondary IDE controller (single fifo)
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard IDE/ESDI Hard Disk Controller

My system has a single 4GB internal HD. I also use a USB external HD,
but the USB
connection isn't working either (but first things first--my immediate
priority is to restore
the CD ROM drive).

Thanks in advance.
--
John


  #5  
Old August 15th 06, 03:23 AM posted to microsoft.public.win98.gen_discussion
Hugh Candlin
External Usenet User
 
Posts: 209
Default Multiple ! flags for IDE controller devices? And CD-ROM problem


"glee" wrote in message
...
I need a clarification here. All the Thinkpads I have seen are laptop
computers.....exactly how did you install an *internal* modem in a laptop?
--
Glen Ventura, MS MVP Shell/User, A+
http://dts-l.org/goodpost.htm

The OP is probably referring to a PC Card modem,
which does fit inside the computer,
rather than being hooked up through a serial port.

Regardless of that, the problem is probably just
duplicate entries in Device Manager,
which puts the computer into compatibility mode,
which "hides" the CD-ROM" drive.


  #6  
Old August 15th 06, 03:21 PM posted to microsoft.public.win98.gen_discussion
john
External Usenet User
 
Posts: 15
Default Multiple ! flags for IDE controller devices? And CD-ROM problem

Haggis wrote:

boot into "safe mode" and delete these

-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard IDE/ESDI Hard Disk Controller

reboot and let us know what happens ...


Thanks for the replies. I did what you suggest. When I boot again in
normal mode, these two device entries reappear:

-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller

and still no CD-ROM recognition.

--John

  #7  
Old August 15th 06, 03:37 PM posted to microsoft.public.win98.gen_discussion
Ben Myers
External Usenet User
 
Posts: 356
Default Multiple ! flags for IDE controller devices? And CD-ROM problem

Remove the modem, start the computer in Command Prompt by
tapping the F8 key repeatedly during bootup, then type
"scanreg /restore" and restore a registry backup that was
created before the failed installation.

Ben

"john" wrote in message ups.com...
Installing an internal modem on my ThinkPad wrought havoc throughout my
drivers.

Now W98 SE doesn't recognize my CD ROM drive. It's not listed in
Device Manager.

Could this have anything to do with multple ! flags related to IDE
controllers? Here's what Device Manager shows:

Hard disk controllers:

-- Intel 82371AB/EB PCI Bus Master IDE Controller
-- ! Primary IDE controller (dual fifo)
-- ! Secondary IDE controller (single fifo)
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard IDE/ESDI Hard Disk Controller

My system has a single 4GB internal HD. I also use a USB external HD,
but the USB
connection isn't working either (but first things first--my immediate
priority is to restore
the CD ROM drive).

Thanks in advance.
--
John

  #8  
Old August 15th 06, 04:23 PM posted to microsoft.public.win98.gen_discussion
john
External Usenet User
 
Posts: 15
Default Multiple ! flags for IDE controller devices? And CD-ROM problem

Ben Myers wrote:
Remove the modem, start the computer in Command Prompt by
tapping the F8 key repeatedly during bootup, then type
"scanreg /restore" and restore a registry backup that was
created before the failed installation.


Been there, done that.

--John

  #9  
Old August 15th 06, 04:52 PM posted to microsoft.public.win98.gen_discussion
Gary S. Terhune
External Usenet User
 
Posts: 1,846
Default Multiple ! flags for IDE controller devices? And CD-ROM problem

1. Use one of these methods in case the NOIDE flag has been set.
http://support.microsoft.com/?kbid=151911
http://support.microsoft.com/?id=188480

2. Boot into Safe Mode, go into Device Manager. Remove ALL drives, ALL drive
controllers (except the "dual/single fifos" which can't be removed in Device
Manager), and the System device called "PCI Bus".

3. Physically disconnect any USB device(s), then remove all USB-related
devices in Device Manager.

4. Right-click the modem device, choose Properties, put in a check near the
button to "Disable in this hardware profile." Click OK. Do the same for any
other modem device (may have an "HCL enumerator" and/or sound devices that
were part of the modem installation.)

5. Look carefully for any devices which you know used to be installed but
which have since been uninstalled and Remove them.

6. Restart into Normal Mode and allow Windows to reinstall the devices. More
than one restart will be necessary.

7. If Device Manager in Normal mode now shows everything to be hunky-dory
and everything works, try re-enabling the modem device(s) by unchecking the
"Disable in this hardware profile" check box(s). Restart and see what
happens.

8. If everything is still OK, finish by reconnecting external USB hardware,
one by one.

9. Report back with the results, *please*. I've tried to keep this to a
minimum, but more drastic procedures may be called for.

--
Gary S. Terhune
MS MVP Shell/User

"john" wrote in message
ups.com...
Installing an internal modem on my ThinkPad wrought havoc throughout my
drivers.

Now W98 SE doesn't recognize my CD ROM drive. It's not listed in
Device Manager.

Could this have anything to do with multple ! flags related to IDE
controllers? Here's what Device Manager shows:

Hard disk controllers:

-- Intel 82371AB/EB PCI Bus Master IDE Controller
-- ! Primary IDE controller (dual fifo)
-- ! Secondary IDE controller (single fifo)
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard IDE/ESDI Hard Disk Controller

My system has a single 4GB internal HD. I also use a USB external HD,
but the USB
connection isn't working either (but first things first--my immediate
priority is to restore
the CD ROM drive).

Thanks in advance.
--
John



  #10  
Old August 15th 06, 04:58 PM posted to microsoft.public.win98.gen_discussion
Haggis
External Usenet User
 
Posts: 325
Default Multiple ! flags for IDE controller devices? And CD-ROM problem




"john" wrote in message
oups.com...
Haggis wrote:

boot into "safe mode" and delete these

-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard IDE/ESDI Hard Disk Controller

reboot and let us know what happens ...


Thanks for the replies. I did what you suggest. When I boot again in
normal mode, these two device entries reappear:

-- ! Standard Bus Mastering IDE Hard Disk Controller
-- ! Standard Bus Mastering IDE Hard Disk Controller

and still no CD-ROM recognition.

--John


did you check in the BIOS that both IDE channels are enabled ?

you may also need to reload the device specific drivers for you motherboard
controllers


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
System information Faldo General 10 October 28th 05 01:01 AM
Disk controller not loading, hard drive not seen PeteV Disk Drives 9 September 27th 05 12:45 AM
network adapters Jeff Hardware 10 December 21st 04 06:51 PM
Please help! Display settings !! Mitzi Monitors & Displays 12 July 11th 04 05:19 AM
USB problem: devices work at boot time but not once unplugged and plugged in again. neilp General 1 June 29th 04 09:41 AM


All times are GMT +1. The time now is 09:55 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.