A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows ME » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

INSTALLING ME PROBLEM



 
 
Thread Tools Display Modes
  #1  
Old May 19th 04, 05:54 PM
sam
external usenet poster
 
Posts: n/a
Default INSTALLING ME PROBLEM

Please help. I tried to change the cd drive to a different
one because the one on the pc wasn't reading well. When I
changed it, I didn't have the correct software so it
didn't work. Then, I tried to install the old one back on,
but I don't have the software that came with it anymore. I
thought that reformatting the C drive might help but it
didn't. Now I can't install ME because it cannot read ME
from the CD drive. I don't know what else to do. HELP!
thanks.
  #2  
Old May 19th 04, 06:46 PM
Mike M
external usenet poster
 
Posts: n/a
Default INSTALLING ME PROBLEM

You shouldn't need to install anything to get Win Me to recognise and use a
CD-ROM. Since you say you have formatted your hard disk your problem is now
nothing to do with the operating system since you don't have one installed but
rather is almost certainly a hardware problem of some sort.
--
Mike Maltby MS-MVP



sam wrote:

Please help. I tried to change the cd drive to a different
one because the one on the pc wasn't reading well. When I
changed it, I didn't have the correct software so it
didn't work. Then, I tried to install the old one back on,
but I don't have the software that came with it anymore. I
thought that reformatting the C drive might help but it
didn't. Now I can't install ME because it cannot read ME
from the CD drive. I don't know what else to do. HELP!
thanks.



  #3  
Old May 19th 04, 07:46 PM
Rick T
external usenet poster
 
Posts: n/a
Default INSTALLING ME PROBLEM

sam wrote:

Please help. I tried to change the cd drive to a different
one because the one on the pc wasn't reading well. When I
changed it, I didn't have the correct software so it
didn't work. Then, I tried to install the old one back on,
but I don't have the software that came with it anymore. I
thought that reformatting the C drive might help but it
didn't. Now I can't install ME because it cannot read ME
from the CD drive. I don't know what else to do. HELP!
thanks.


That's a little too confusing for me (and you too apparently), but...

do you have an Emergency Boot Disk on hand? (the floppy disk you created
when you first installed Windows ME). If you don't, go to
www.bootdisk.com and download one (the WinME OEM floppy is fine).

Start your machine from the floppy disk, choose CD support, can you
*see* your CD here?

we're not talking about a USB CD drive are we ?



Rick
  #4  
Old May 19th 04, 08:27 PM
Sam
external usenet poster
 
Posts: n/a
Default INSTALLING ME PROBLEM

Yes, I have the bootdisk. I tried that but even if I
start the installation with cd support, it cannot read
the cd from the drive so first off, I think I need to fix
something so that the computer can recognize the drive
but I don't know how or where to start. No, this is not a
USB cd drive.


-----Original Message-----
sam wrote:

Please help. I tried to change the cd drive to a

different
one because the one on the pc wasn't reading well.

When I
changed it, I didn't have the correct software so it
didn't work. Then, I tried to install the old one back

on,
but I don't have the software that came with it

anymore. I
thought that reformatting the C drive might help but

it
didn't. Now I can't install ME because it cannot read

ME
from the CD drive. I don't know what else to do. HELP!
thanks.


That's a little too confusing for me (and you too

apparently), but...

do you have an Emergency Boot Disk on hand? (the floppy

disk you created
when you first installed Windows ME). If you don't, go

to
www.bootdisk.com and download one (the WinME OEM floppy

is fine).

Start your machine from the floppy disk, choose CD

support, can you
*see* your CD here?

we're not talking about a USB CD drive are we ?



Rick
.

  #5  
Old May 19th 04, 08:49 PM
Mike M
external usenet poster
 
Posts: n/a
Default INSTALLING ME PROBLEM

Your problem is with your hardware. Fix that and you should have no problem.
You say you have swapped CD-ROMs. Check that you fitted the cables correctly,
remembering to check both ends of the ribbon cable, that is at the CD-ROM end
and also where it plugs in to the motherboard. Check that if you have two
drives on the same ribbon one is set as master and the other as slave (unless
using Cable Select).
--
Mike Maltby MS-MVP



Sam wrote:

Yes, I have the bootdisk. I tried that but even if I
start the installation with cd support, it cannot read
the cd from the drive so first off, I think I need to fix
something so that the computer can recognize the drive
but I don't know how or where to start. No, this is not a
USB cd drive.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Registry Problem while installing Win98 Second Edition sudhi Setup & Installation 1 July 15th 04 05:06 PM
problem installing usb card neil General 1 July 13th 04 12:04 PM
Problem installing win98 Susan Improving Performance 1 July 11th 04 10:37 AM
problem installing Win98 SE zino Setup & Installation 2 June 28th 04 01:15 PM
problem installing win98 SE zino Setup & Installation 1 June 23rd 04 06:56 AM


All times are GMT +1. The time now is 10:33 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.