If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
New install: ME boots to desktop and then blue screen: windows protection error
Thursday Morn
ME was working on this computer. F-disked the drive and installed XP. No installation errors. Would not boot. Thought the board may be too old. (Shuttle Spacewalker HOT-591p, via chipset, newest bios) So, I then format the disk and install ME. No installation errors. ( Only video card, ram, floppy, harddrive. ) ( All on board peripherals are disabled: Com, parr, usb. ) ( ACPI is enabled. ) I changed the video card. The card was found, the drivers installed, the monitor was found. Reboot: it gets to the desktop and poops: Blue screen System halted. Windows protection error It does this in safe mode and in normal mode. Thoughts? J |
#2
|
|||
|
|||
New install: ME boots to desktop and then blue screen: windows protection error
"J" wrote in message
... Thursday Morn ME was working on this computer. F-disked the drive and installed XP. No installation errors. Would not boot. Thought the board may be too old. (Shuttle Spacewalker HOT-591p, via chipset, newest bios) So, I then format the disk and install ME. No installation errors. ( Only video card, ram, floppy, harddrive. ) ( All on board peripherals are disabled: Com, parr, usb. ) ( ACPI is enabled. ) I changed the video card. The card was found, the drivers installed, the monitor was found. Reboot: it gets to the desktop and poops: Blue screen System halted. Windows protection error It does this in safe mode and in normal mode. Thoughts? Wrong video drivers. Which video card did you use for the XP installation? Did ME boot OK before you changed the card? Shane |
#3
|
|||
|
|||
New install: ME boots to desktop and then blue screen: windows protection error
Thank you for your response.
Wrong video drivers. Which video card did you use for the XP installation? Did ME boot OK before you changed the card? 'Tis a GeForce2 MX400 64m AGP card. The video drivers were auto loaded by the XP install and the ME install. Neither would boot. I changed the card to an old pci card. ME found the card, loaded drivers, found the monitor and then wanted to reboot. And it does not boot to normal, and does not boot to safe mode. Just like with the other video card. J "Shane" wrote in message ... "J" wrote in message ... Thursday Morn ME was working on this computer. F-disked the drive and installed XP. No installation errors. Would not boot. Thought the board may be too old. (Shuttle Spacewalker HOT-591p, via chipset, newest bios) So, I then format the disk and install ME. No installation errors. ( Only video card, ram, floppy, harddrive. ) ( All on board peripherals are disabled: Com, parr, usb. ) ( ACPI is enabled. ) I changed the video card. The card was found, the drivers installed, the monitor was found. Reboot: it gets to the desktop and poops: Blue screen System halted. Windows protection error It does this in safe mode and in normal mode. Thoughts? Wrong video drivers. Which video card did you use for the XP installation? Did ME boot OK before you changed the card? Shane |
#4
|
|||
|
|||
New install: ME boots to desktop and then blue screen: windows protection error
See what you think of this:
http://support.microsoft.com/default...NoWebContent=1 Or http://tinyurl.com/c8n8 Plenty to mull on. Good luck. Shane "J" wrote in message ... Thank you for your response. Wrong video drivers. Which video card did you use for the XP installation? Did ME boot OK before you changed the card? 'Tis a GeForce2 MX400 64m AGP card. The video drivers were auto loaded by the XP install and the ME install. Neither would boot. I changed the card to an old pci card. ME found the card, loaded drivers, found the monitor and then wanted to reboot. And it does not boot to normal, and does not boot to safe mode. Just like with the other video card. J "Shane" wrote in message ... "J" wrote in message ... Thursday Morn ME was working on this computer. F-disked the drive and installed XP. No installation errors. Would not boot. Thought the board may be too old. (Shuttle Spacewalker HOT-591p, via chipset, newest bios) So, I then format the disk and install ME. No installation errors. ( Only video card, ram, floppy, harddrive. ) ( All on board peripherals are disabled: Com, parr, usb. ) ( ACPI is enabled. ) I changed the video card. The card was found, the drivers installed, the monitor was found. Reboot: it gets to the desktop and poops: Blue screen System halted. Windows protection error It does this in safe mode and in normal mode. Thoughts? Wrong video drivers. Which video card did you use for the XP installation? Did ME boot OK before you changed the card? Shane |
#5
|
|||
|
|||
New install: ME boots to desktop and then blue screen: windows protection error
Thank you for your time.
"Shane" wrote in message ... See what you think of this: http://support.microsoft.com/default...NoWebContent=1 Or http://tinyurl.com/c8n8 Plenty to mull on. Good luck. Shane "J" wrote in message ... Thank you for your response. Wrong video drivers. Which video card did you use for the XP installation? Did ME boot OK before you changed the card? 'Tis a GeForce2 MX400 64m AGP card. The video drivers were auto loaded by the XP install and the ME install. Neither would boot. I changed the card to an old pci card. ME found the card, loaded drivers, found the monitor and then wanted to reboot. And it does not boot to normal, and does not boot to safe mode. Just like with the other video card. J "Shane" wrote in message ... "J" wrote in message ... Thursday Morn ME was working on this computer. F-disked the drive and installed XP. No installation errors. Would not boot. Thought the board may be too old. (Shuttle Spacewalker HOT-591p, via chipset, newest bios) So, I then format the disk and install ME. No installation errors. ( Only video card, ram, floppy, harddrive. ) ( All on board peripherals are disabled: Com, parr, usb. ) ( ACPI is enabled. ) I changed the video card. The card was found, the drivers installed, the monitor was found. Reboot: it gets to the desktop and poops: Blue screen System halted. Windows protection error It does this in safe mode and in normal mode. Thoughts? Wrong video drivers. Which video card did you use for the XP installation? Did ME boot OK before you changed the card? Shane |
#6
|
|||
|
|||
New install: ME boots to desktop and then blue screen: windows protection error
You're welcome. Hope you sort it out.
Shane "J" wrote in message ... Thank you for your time. "Shane" wrote in message ... See what you think of this: http://support.microsoft.com/default...NoWebContent=1 Or http://tinyurl.com/c8n8 Plenty to mull on. Good luck. Shane "J" wrote in message ... Thank you for your response. Wrong video drivers. Which video card did you use for the XP installation? Did ME boot OK before you changed the card? 'Tis a GeForce2 MX400 64m AGP card. The video drivers were auto loaded by the XP install and the ME install. Neither would boot. I changed the card to an old pci card. ME found the card, loaded drivers, found the monitor and then wanted to reboot. And it does not boot to normal, and does not boot to safe mode. Just like with the other video card. J "Shane" wrote in message ... "J" wrote in message ... Thursday Morn ME was working on this computer. F-disked the drive and installed XP. No installation errors. Would not boot. Thought the board may be too old. (Shuttle Spacewalker HOT-591p, via chipset, newest bios) So, I then format the disk and install ME. No installation errors. ( Only video card, ram, floppy, harddrive. ) ( All on board peripherals are disabled: Com, parr, usb. ) ( ACPI is enabled. ) I changed the video card. The card was found, the drivers installed, the monitor was found. Reboot: it gets to the desktop and poops: Blue screen System halted. Windows protection error It does this in safe mode and in normal mode. Thoughts? Wrong video drivers. Which video card did you use for the XP installation? Did ME boot OK before you changed the card? Shane |
Thread Tools | |
Display Modes | |
|
|