If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Installing Windows 98 by floppy only
I have inherited a Panasonic Toughbook CF 25 with a 1.4 GB hard drive and a floppy drive only. It has a parallel port for printer but no USB port. It's pretty old. It has no OS. Can I install Windows 98? And if so how? GaelicForce -- GaelicForce ------------------------------------------------------------------------ GaelicForce's Profile: http://forums.techarena.in/member.php?userid=49920 View this thread: http://forums.techarena.in/showthread.php?t=971958 http://forums.techarena.in |
#2
|
|||
|
|||
Installing Windows 98 by floppy only
Not sure why you'd want to go to the trouble, and it's a LOT of trouble with
lots of potential pitfalls, and no, it's not normally done via floppy. You have to remove the HD, put it into a functioning machine, manage to format the laptop HD without screwing up your main system, using the /s switch, make sure the partition is Active, then create a folder on the laptop drive called WIN98, then copy just the files, not the sub-folders, from the folder with that same name on the installation CD. Then put the HD back into the laptop, boot up, change to the WIN98 directory and run SETUP. And that will only MAYBE work. You'll likely need to find drivers for the machine, and since it is almost certainly a Win95 machine or earlier, who knows if 98 drivers exist for that machine. Then again, maybe you'll get lucky and the installation files already include those drivers. Yes, MS distributed Win98 on floppies, but they haven't done so for a long, long time. I have a set, but considering they're floppies, which tend to deteriorate over time, I'm betting they're worthless. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "GaelicForce" wrote in message ... I have inherited a Panasonic Toughbook CF 25 with a 1.4 GB hard drive and a floppy drive only. It has a parallel port for printer but no USB port. It's pretty old. It has no OS. Can I install Windows 98? And if so how? GaelicForce -- GaelicForce ------------------------------------------------------------------------ GaelicForce's Profile: http://forums.techarena.in/member.php?userid=49920 View this thread: http://forums.techarena.in/showthread.php?t=971958 http://forums.techarena.in |
#3
|
|||
|
|||
Installing Windows 98 by floppy only
"GaelicForce" wrote in message ... I have inherited a Panasonic Toughbook CF 25 with a 1.4 GB hard drive and a floppy drive only. It has a parallel port for printer but no USB port. It's pretty old. It has no OS. Can I install Windows 98? And if so how? GaelicForce Not impossible but fairly impractical to install win98 from floppies. If you want to use Windows on that machine, Might as well use win95. That can be installed from floppies and since the machine has no USB anyway...will at least give you an OS |
#4
|
|||
|
|||
Installing Windows 98 by floppy only
2008-05-20 20:03:13 GaelicForce wrote:
I have inherited a Panasonic Toughbook CF 25 with a 1.4 GB hard drive and a floppy drive only. It has a parallel port for printer but no USB port. It's pretty old. It has no OS. Can I install Windows 98? And if so how? Hmm.. I remember I have tried install win98 with only floppys ones, it was 20 floppys or so... with badsectors on disk 15... Instead you should probably copy the windows98 cd to a directory on the harddisk and install from that directory. If you can't remove the harddisk and mount it on another computer to format it and copy the files to it (it is a portable so....) then you should copy the win98 cd files with a dos program. Do it have a network card? freedos comes with network support. Or use a serial or parallel cable to connect the computer to another computer. (sure slow but you don't have to sit with it while you wait) boot on a dos bootfloppy and format the disk from the dos-prompt then transfer the files between the computers with some dosprogram like norton commander If it is an old computer you should probably use win98lite to remove internet explorer and other things that slows down windows |
#5
|
|||
|
|||
Installing Windows 98 by floppy only
"teebo" wrote in message newsp.ubiwnnbybr8ivg@300pl... 2008-05-20 20:03:13 GaelicForce wrote: I have inherited a Panasonic Toughbook CF 25 with a 1.4 GB hard drive and a floppy drive only. It has a parallel port for printer but no USB port. It's pretty old. It has no OS. Can I install Windows 98? And if so how? Hmm.. I remember I have tried install win98 with only floppys ones, it was 20 floppys or so... with badsectors on disk 15... LOL win95 needs close to 30 floppies http://home.satx.rr.com/badour/html/w95_floppies.html Win98 would need a *lot* more!!! Instead you should probably copy the windows98 cd to a directory on the harddisk and install from that directory. If you can't remove the harddisk and mount it on another computer to format it and copy the files to it (it is a portable so....) then you should copy the win98 cd files with a dos program. Do it have a network card? freedos comes with network support. Or use a serial or parallel cable to connect the computer to another computer. (sure slow but you don't have to sit with it while you wait) boot on a dos bootfloppy and format the disk from the dos-prompt then transfer the files between the computers with some dosprogram like norton commander If it is an old computer you should probably use win98lite to remove internet explorer and other things that slows down windows |
#6
|
|||
|
|||
Installing Windows 98 by floppy only
I have inherited a Panasonic Toughbook CF 25 with a 1.4 GB hard drive and a floppy drive only. It has a parallel port for printer but no USB port. It's pretty old. It has no OS. Can I install Windows 98? And if so how? Hmm.. I remember I have tried install win98 with only floppys ones, it was 20 floppys or so... with badsectors on disk 15... LOL win95 needs close to 30 floppies http://home.satx.rr.com/badour/html/w95_floppies.html Win98 would need a *lot* more!!! hehe, yeah I guess it must have been win95 I used (osr2.1 have 26 floppys says wikipedia) or it was even more floppys than I want to remember :-D I do remember it was original floppys and the installation took ages to do, and at the end failed because one of them was bad... with 38-39 dmf-floppys for win98, is it possible for all of them to work at the same time?? well it is insane anyway... Or use a serial or parallel cable to connect the computer to another computer. (sure slow but you don't have to sit with it I forgot to write that it will not work with just an old modem-cable you have but perhaps you can open it and convert it to a nullmodem-cable http://en.wikipedia.org/wiki/Null_modem (you don't use your old modem nowadays anyway, right?) info on the parallel version is linked from there too. btw, what do you want to do with the computer? web surfing (if it have network) might be a bit slow on a 166Mhz pentium (even though you turn off all flash), and you should check that it have at least 64MB ram. If you don't need to run a windows program you could try some small os like MenuetOS/32 or Kolibri os that fits on a single floppy :-) And for old dos games you just need dos and not windows. |
#7
|
|||
|
|||
Installing Windows 98 by floppy only
Found it. There are 33 floppies for Win98 Gold. I have a set I've never had
to use. Maybe it will be a collectors' item someday. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "philo" wrote in message ... "teebo" wrote in message newsp.ubiwnnbybr8ivg@300pl... 2008-05-20 20:03:13 GaelicForce wrote: I have inherited a Panasonic Toughbook CF 25 with a 1.4 GB hard drive and a floppy drive only. It has a parallel port for printer but no USB port. It's pretty old. It has no OS. Can I install Windows 98? And if so how? Hmm.. I remember I have tried install win98 with only floppys ones, it was 20 floppys or so... with badsectors on disk 15... LOL win95 needs close to 30 floppies http://home.satx.rr.com/badour/html/w95_floppies.html Win98 would need a *lot* more!!! Instead you should probably copy the windows98 cd to a directory on the harddisk and install from that directory. If you can't remove the harddisk and mount it on another computer to format it and copy the files to it (it is a portable so....) then you should copy the win98 cd files with a dos program. Do it have a network card? freedos comes with network support. Or use a serial or parallel cable to connect the computer to another computer. (sure slow but you don't have to sit with it while you wait) boot on a dos bootfloppy and format the disk from the dos-prompt then transfer the files between the computers with some dosprogram like norton commander If it is an old computer you should probably use win98lite to remove internet explorer and other things that slows down windows |
#8
|
|||
|
|||
Installing Windows 98 by floppy only
"Gary S. Terhune" none wrote in message ... Found it. There are 33 floppies for Win98 Gold. I have a set I've never had to use. Maybe it will be a collectors' item someday. Definitely a collectors item. Since Win95 was 26 floppies I can't imagine how they got win98 on 33 floppies considering there are about 68 .cab files up in the 1.7 meg range. Or is it perhaps some sort of minimal install? |
#9
|
|||
|
|||
Installing Windows 98 by floppy only
I miscounted. There are 38 of them. I have the Upgrade version, because I
bought the Upgrade Win98 the day it came out and it was via that purchase that I also got the floppies (just had to ask for them.) http://support.microsoft.com/kb/q191054/ Unfortunately, that article doesn't explain the apparent magic. Only lists the contents of a few disks. I'm not going to unpackage them to review, and I wouldn't stick any of them in the POS floppy drive that is currently available to me. Now that I've and used that Auto-Patcher to test (it lived up to every one of my negative expectations), I'm gonna have to flatten the box, anyway, so I may as well see if I can find a cleaner floppy drive in the pile. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "philo" wrote in message ... "Gary S. Terhune" none wrote in message ... Found it. There are 33 floppies for Win98 Gold. I have a set I've never had to use. Maybe it will be a collectors' item someday. Definitely a collectors item. Since Win95 was 26 floppies I can't imagine how they got win98 on 33 floppies considering there are about 68 .cab files up in the 1.7 meg range. Or is it perhaps some sort of minimal install? |
#10
|
|||
|
|||
Installing Windows 98 by floppy only
"Gary S. Terhune" none wrote in message ... I miscounted. There are 38 of them. I have the Upgrade version, because I bought the Upgrade Win98 the day it came out and it was via that purchase that I also got the floppies (just had to ask for them.) http://support.microsoft.com/kb/q191054/ Unfortunately, that article doesn't explain the apparent magic. Only lists the contents of a few disks. I'm not going to unpackage them to review, and I wouldn't stick any of them in the POS floppy drive that is currently available to me. Now that I've and used that Auto-Patcher to test (it lived up to every one of my negative expectations), I'm gonna have to flatten the box, anyway, so I may as well see if I can find a cleaner floppy drive in the pile. Yes I did find a little bit of info on Google and must say that 38 floppies is a lot less then I would have expected... but still a heck of a lot of floppies to load.(IIRC, the cd version of win98 has a number of extra folder that would not be needed for a normal install, so I imagine they are not included in the floppy version.) Just one bad floppy and the installation would probably fail. I have the non-DMF version of win95a on floppies and I think it's 29 total and I have used them many times. The quality of the Microsoft floppies is excellent however and I don't think I've had to re-make more than a few over many years of use. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
windows 98 floppy disk version | DanT | Setup & Installation | 40 | September 24th 07 03:08 AM |
installing Windows 98, No CD player, NO Floppy Player | jereviscious | General | 5 | July 29th 06 07:18 PM |
installing windows 98 with only CD or floppy disk available | abc | Setup & Installation | 3 | April 9th 05 02:17 PM |
windows 98 floppy disks | [email protected] | Disk Drives | 1 | October 11th 04 01:36 AM |
windows 98 on floppy | Kat | Disk Drives | 1 | May 9th 04 01:31 AM |