|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#21
December 14th 05, 12:05 PM
posted to microsoft.public.win98.gen_discussion
|
|||
|
|||
Why Why Why?? Internet Explorer Problem
Anthony,
Start in Safe Mode, look in Device Manager there, and see how many different items are listed under the Display Adapter category in Safe Mode. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "ANTHONY DIODATI" wrote in message news:UpInf.30728$Wo2.24603@trnddc04... "glee" wrote in message ... Download, install, then run Aida32, and see what it shows as your actual video crad model. http://aumha.org/freeware/freeware.php#aida32 -- OK, I got it it DL by closeing my download mananger, then that box poped up with the download now, right click, save target as................... The site said "Note: DirectX 6.0 or higher needs to be installed on the system prior to installing these drivers."So I installed DirectX 9 . When I then tried to install the driver, It said "display driver not compatible with the display adapter(s) installed on this system" So I must have not had the right driver for this system, or card. Device mananger says I have a ATI 3D Rage Pro (atir3) Thanks, Tony D. Under Display it shows The same (copied from aida32) Internet Explorer 6.0.2800.1106 (IE 6.0 SP1) Computer Name N8K8F7 Motherboard CPU Type Intel Pentium II, 450 MHz (4.5 x 100) Motherboard Name Unknown Motherboard Chipset Intel 82440BX/ZX System Memory 256 MB (SDRAM) BIOS Type Phoenix (11/30/99) Communication Port Communications Port (COM1) Communication Port ECP Printer Port (LPT1) ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Display Video Adapter ATI 3D Rage Pro (atir3) (4 MB) 3D Accelerator ATI 3D-Rage Pro ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Network Adapter 3Com 3C90x Ethernet Adapter (192.168.1.47) Thanks, Tony D. 
|
|
#22
December 14th 05, 12:11 PM
posted to microsoft.public.win98.gen_discussion
|
|||
|
|||
|
Why Why Why?? Internet Explorer Problem
Don't know, Just tried it again, same message.
Thanks for trying. Tony D. "glee" wrote in message ... That's odd....the driver you downloaded states it is for the display adapter reported by AIDA32. Not sure why it says it is not. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "ANTHONY DIODATI" wrote in message news:UpInf.30728$Wo2.24603@trnddc04... "glee" wrote in message ... Download, install, then run Aida32, and see what it shows as your actual video crad model. http://aumha.org/freeware/freeware.php#aida32 -- OK, I got it it DL by closeing my download mananger, then that box poped up with the download now, right click, save target as................... The site said "Note: DirectX 6.0 or higher needs to be installed on the system prior to installing these drivers."So I installed DirectX 9 . When I then tried to install the driver, It said "display driver not compatible with the display adapter(s) installed on this system" So I must have not had the right driver for this system, or card. Device mananger says I have a ATI 3D Rage Pro (atir3) Thanks, Tony D. Under Display it shows The same (copied from aida32) Internet Explorer 6.0.2800.1106 (IE 6.0 SP1) Computer Name N8K8F7 Motherboard CPU Type Intel Pentium II, 450 MHz (4.5 x 100) Motherboard Name Unknown Motherboard Chipset Intel 82440BX/ZX System Memory 256 MB (SDRAM) BIOS Type Phoenix (11/30/99) Communication Port Communications Port (COM1) Communication Port ECP Printer Port (LPT1) ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Display Video Adapter ATI 3D Rage Pro (atir3) (4 MB) 3D Accelerator ATI 3D-Rage Pro ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Network Adapter 3Com 3C90x Ethernet Adapter (192.168.1.47) Thanks, Tony D.
|
|
#23
December 14th 05, 02:27 PM
posted to microsoft.public.win98.gen_discussion
|
|||
|
|||
|
Why Why Why?? Internet Explorer Problem
I lost track - is this an onboard graphics, or on a PCI/AGP slot? - if the
former, some were pretty tetchy about drivers, as the OEMs tweaked the chipsets rather badly (presumably to reduce costs). -- Noel Paton (MS-MVP 2002-2006, Windows) Nil Carborundum Illegitemi http://www.crashfixpc.com/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "glee" wrote in message ... That's odd....the driver you downloaded states it is for the display adapter reported by AIDA32. Not sure why it says it is not. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "ANTHONY DIODATI" wrote in message news:UpInf.30728$Wo2.24603@trnddc04... "glee" wrote in message ... Download, install, then run Aida32, and see what it shows as your actual video crad model. http://aumha.org/freeware/freeware.php#aida32 -- OK, I got it it DL by closeing my download mananger, then that box poped up with the download now, right click, save target as................... The site said "Note: DirectX 6.0 or higher needs to be installed on the system prior to installing these drivers."So I installed DirectX 9 . When I then tried to install the driver, It said "display driver not compatible with the display adapter(s) installed on this system" So I must have not had the right driver for this system, or card. Device mananger says I have a ATI 3D Rage Pro (atir3) Thanks, Tony D. Under Display it shows The same (copied from aida32) Internet Explorer 6.0.2800.1106 (IE 6.0 SP1) Computer Name N8K8F7 Motherboard CPU Type Intel Pentium II, 450 MHz (4.5 x 100) Motherboard Name Unknown Motherboard Chipset Intel 82440BX/ZX System Memory 256 MB (SDRAM) BIOS Type Phoenix (11/30/99) Communication Port Communications Port (COM1) Communication Port ECP Printer Port (LPT1) ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Display Video Adapter ATI 3D Rage Pro (atir3) (4 MB) 3D Accelerator ATI 3D-Rage Pro ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Network Adapter 3Com 3C90x Ethernet Adapter (192.168.1.47) Thanks, Tony D.
|
|
#24
December 14th 05, 07:49 PM
posted to microsoft.public.win98.gen_discussion
|
|||
|
|||
|
Why Why Why?? Internet Explorer Problem
I agree....but I dunno if it is onboard or a vid card in a slot. I don't think the
OP ever stated. Let's ask..... -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "Noel Paton" wrote in message ... I lost track - is this an onboard graphics, or on a PCI/AGP slot? - if the former, some were pretty tetchy about drivers, as the OEMs tweaked the chipsets rather badly (presumably to reduce costs). -- Noel Paton (MS-MVP 2002-2006, Windows) Nil Carborundum Illegitemi http://www.crashfixpc.com/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "glee" wrote in message ... That's odd....the driver you downloaded states it is for the display adapter reported by AIDA32. Not sure why it says it is not. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "ANTHONY DIODATI" wrote in message news:UpInf.30728$Wo2.24603@trnddc04... "glee" wrote in message ... Download, install, then run Aida32, and see what it shows as your actual video crad model. http://aumha.org/freeware/freeware.php#aida32 -- OK, I got it it DL by closeing my download mananger, then that box poped up with the download now, right click, save target as................... The site said "Note: DirectX 6.0 or higher needs to be installed on the system prior to installing these drivers."So I installed DirectX 9 . When I then tried to install the driver, It said "display driver not compatible with the display adapter(s) installed on this system" So I must have not had the right driver for this system, or card. Device mananger says I have a ATI 3D Rage Pro (atir3) Thanks, Tony D. Under Display it shows The same (copied from aida32) Internet Explorer 6.0.2800.1106 (IE 6.0 SP1) Computer Name N8K8F7 Motherboard CPU Type Intel Pentium II, 450 MHz (4.5 x 100) Motherboard Name Unknown Motherboard Chipset Intel 82440BX/ZX System Memory 256 MB (SDRAM) BIOS Type Phoenix (11/30/99) Communication Port Communications Port (COM1) Communication Port ECP Printer Port (LPT1) ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Display Video Adapter ATI 3D Rage Pro (atir3) (4 MB) 3D Accelerator ATI 3D-Rage Pro ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Network Adapter 3Com 3C90x Ethernet Adapter (192.168.1.47) Thanks, Tony D.
|
|
#25
December 20th 05, 12:14 AM
posted to microsoft.public.win98.gen_discussion
|
|||
|
|||
|
Why Why Why?? Internet Explorer Problem
This is all I get, same as in regular mode,
Video Adapter ATI 3D Rage Pro (atir3) Thanks, Tony D. "glee" wrote in message ... Anthony, Start in Safe Mode, look in Device Manager there, and see how many different items are listed under the Display Adapter category in Safe Mode. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "ANTHONY DIODATI" wrote in message news:UpInf.30728$Wo2.24603@trnddc04... "glee" wrote in message ... Download, install, then run Aida32, and see what it shows as your actual video crad model. http://aumha.org/freeware/freeware.php#aida32 -- OK, I got it it DL by closeing my download mananger, then that box poped up with the download now, right click, save target as................... The site said "Note: DirectX 6.0 or higher needs to be installed on the system prior to installing these drivers."So I installed DirectX 9 . When I then tried to install the driver, It said "display driver not compatible with the display adapter(s) installed on this system" So I must have not had the right driver for this system, or card. Device mananger says I have a ATI 3D Rage Pro (atir3) Thanks, Tony D. Under Display it shows The same (copied from aida32) Internet Explorer 6.0.2800.1106 (IE 6.0 SP1) Computer Name N8K8F7 Motherboard CPU Type Intel Pentium II, 450 MHz (4.5 x 100) Motherboard Name Unknown Motherboard Chipset Intel 82440BX/ZX System Memory 256 MB (SDRAM) BIOS Type Phoenix (11/30/99) Communication Port Communications Port (COM1) Communication Port ECP Printer Port (LPT1) ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Display Video Adapter ATI 3D Rage Pro (atir3) (4 MB) 3D Accelerator ATI 3D-Rage Pro ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Network Adapter 3Com 3C90x Ethernet Adapter (192.168.1.47) Thanks, Tony D.
|
|
#26
December 22nd 05, 01:45 AM
posted to microsoft.public.win98.gen_discussion
|
|||
|
|||
|
Why Why Why?? Internet Explorer Problem
Sorry for the delay.....you seem to definitely have ATI 3D Rage Pro (atir3), then.
;-) The drivers you tried to download may not be an exact match due to tweaking by Gateway, as I think Noel suggested. We got off on a bit of a tangent here with the video drivers. You mentioned earlier that you wondered if a bad RAM stick could be at fault. It seems a rather long shot, but if you want to test your RAM, download one of these diagnostic diskette makers, then use it to make a bootable diskette for testing your RAM (download them all if you like): DocMemory http://www.simmtester.com/page/produ...c/download.asp MemTest86+: http://www.memtest.org/ Windows Memory Tester http://oca.microsoft.com/en/windiag.asp -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "ANTHONY DIODATI" wrote in message news:J1Ipf.14182$l25.12921@trnddc03... This is all I get, same as in regular mode, Video Adapter ATI 3D Rage Pro (atir3) Thanks, Tony D. "glee" wrote in message ... Anthony, Start in Safe Mode, look in Device Manager there, and see how many different items are listed under the Display Adapter category in Safe Mode. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "ANTHONY DIODATI" wrote in message news:UpInf.30728$Wo2.24603@trnddc04... "glee" wrote in message ... Download, install, then run Aida32, and see what it shows as your actual video crad model. http://aumha.org/freeware/freeware.php#aida32 -- OK, I got it it DL by closeing my download mananger, then that box poped up with the download now, right click, save target as................... The site said "Note: DirectX 6.0 or higher needs to be installed on the system prior to installing these drivers."So I installed DirectX 9 . When I then tried to install the driver, It said "display driver not compatible with the display adapter(s) installed on this system" So I must have not had the right driver for this system, or card. Device mananger says I have a ATI 3D Rage Pro (atir3) Thanks, Tony D. Under Display it shows The same (copied from aida32) Internet Explorer 6.0.2800.1106 (IE 6.0 SP1) Computer Name N8K8F7 Motherboard CPU Type Intel Pentium II, 450 MHz (4.5 x 100) Motherboard Name Unknown Motherboard Chipset Intel 82440BX/ZX System Memory 256 MB (SDRAM) BIOS Type Phoenix (11/30/99) Communication Port Communications Port (COM1) Communication Port ECP Printer Port (LPT1) ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Display Video Adapter ATI 3D Rage Pro (atir3) (4 MB) 3D Accelerator ATI 3D-Rage Pro ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Network Adapter 3Com 3C90x Ethernet Adapter (192.168.1.47) Thanks, Tony D.
|
|
#27
December 23rd 05, 01:11 AM
posted to microsoft.public.win98.gen_discussion
|
|||
|
|||
|
Why Why Why?? Internet Explorer Problem
Sounds good, I'll try that after christmass
Thanks, Tony D. "glee" wrote in message ... Sorry for the delay.....you seem to definitely have ATI 3D Rage Pro (atir3), then. ;-) The drivers you tried to download may not be an exact match due to tweaking by Gateway, as I think Noel suggested. We got off on a bit of a tangent here with the video drivers. You mentioned earlier that you wondered if a bad RAM stick could be at fault. It seems a rather long shot, but if you want to test your RAM, download one of these diagnostic diskette makers, then use it to make a bootable diskette for testing your RAM (download them all if you like): DocMemory http://www.simmtester.com/page/produ...c/download.asp MemTest86+: http://www.memtest.org/ Windows Memory Tester http://oca.microsoft.com/en/windiag.asp -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "ANTHONY DIODATI" wrote in message news:J1Ipf.14182$l25.12921@trnddc03... This is all I get, same as in regular mode, Video Adapter ATI 3D Rage Pro (atir3) Thanks, Tony D. "glee" wrote in message ... Anthony, Start in Safe Mode, look in Device Manager there, and see how many different items are listed under the Display Adapter category in Safe Mode. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm "ANTHONY DIODATI" wrote in message news:UpInf.30728$Wo2.24603@trnddc04... "glee" wrote in message ... Download, install, then run Aida32, and see what it shows as your actual video crad model. http://aumha.org/freeware/freeware.php#aida32 -- OK, I got it it DL by closeing my download mananger, then that box poped up with the download now, right click, save target as................... The site said "Note: DirectX 6.0 or higher needs to be installed on the system prior to installing these drivers."So I installed DirectX 9 . When I then tried to install the driver, It said "display driver not compatible with the display adapter(s) installed on this system" So I must have not had the right driver for this system, or card. Device mananger says I have a ATI 3D Rage Pro (atir3) Thanks, Tony D. Under Display it shows The same (copied from aida32) Internet Explorer 6.0.2800.1106 (IE 6.0 SP1) Computer Name N8K8F7 Motherboard CPU Type Intel Pentium II, 450 MHz (4.5 x 100) Motherboard Name Unknown Motherboard Chipset Intel 82440BX/ZX System Memory 256 MB (SDRAM) BIOS Type Phoenix (11/30/99) Communication Port Communications Port (COM1) Communication Port ECP Printer Port (LPT1) ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Display Video Adapter ATI 3D Rage Pro (atir3) (4 MB) 3D Accelerator ATI 3D-Rage Pro ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++ Network Adapter 3Com 3C90x Ethernet Adapter (192.168.1.47) Thanks, Tony D.
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Please help me recover photos of my newborn | rbryan | General | 33 | May 6th 05 01:30 AM |
| Microsoft Internet Explorer problem | Leroy | Internet | 1 | October 6th 04 02:12 PM |
| internet explorer problem. | katie | General | 1 | September 29th 04 09:25 PM |
| microsoft internet explorer problem | merty | Improving Performance | 0 | June 27th 04 01:32 PM |
| Internet Explorer problem | Francis Marsden | General | 8 | June 15th 04 07:59 PM |
Linear Mode
