A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows ME » Setup & Installation
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Switch User in WinME



 
 
Thread Tools Display Modes
  #1  
Old May 24th 06, 09:33 AM posted to microsoft.public.windowsme.setup
external usenet poster
 
Posts: n/a
Default Switch User in WinME

Hi
There are three users on my computer. To switch from one user to
another, the "new" user name must ALWAYS be typed in as the InputBox
always comes up with the name of the previous user inserted.
(Note that none of the users uses a password).
Is there any way to avoid having to type this in by having a drop-down
menu (showing the names of all current users) or by having an icon for
each user (as in WinXP).
While I doubt if there is some SETUP feature to permit this that I have
overlooked (although that's always possible), perhaps somebody knows of
an easily inserted script or a third-party freeware tool that brings
this facility to WinME.
TIA
Paul

  #2  
Old May 24th 06, 09:42 AM posted to microsoft.public.windowsme.setup
external usenet poster
 
Posts: n/a
Default Switch User in WinME

You can use Family logon in ME.
- you may need to install it from Network Properties - search in the Help
files for 'family logon'


--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"PaulFXH" wrote in message
oups.com...
Hi
There are three users on my computer. To switch from one user to
another, the "new" user name must ALWAYS be typed in as the InputBox
always comes up with the name of the previous user inserted.
(Note that none of the users uses a password).
Is there any way to avoid having to type this in by having a drop-down
menu (showing the names of all current users) or by having an icon for
each user (as in WinXP).
While I doubt if there is some SETUP feature to permit this that I have
overlooked (although that's always possible), perhaps somebody knows of
an easily inserted script or a third-party freeware tool that brings
this facility to WinME.
TIA
Paul


  #3  
Old May 24th 06, 01:54 PM posted to microsoft.public.windowsme.setup
external usenet poster
 
Posts: n/a
Default Switch User in WinME


Noel Paton escreveu:

You can use Family logon in ME.
- you may need to install it from Network Properties - search in the Help
files for 'family logon'


Hi Noel
Thanks for your reply but I have the impression I may have mislead you
as to what I'm looking for.
I gather this because the only information I can find about Family
Logon in WinMe refers to Internet Connection Sharing which is not at
all what I need.
In any event, there is no ICS adapter on this computer.
When I said there were three users, I was referring to three users on
the SAME computer of which we have just one---so no networking is
possible.
What I'm after is a means of facilitating and speeding up the switching
from one user to another by avoiding having to type in the new users
name.
TIA
Paul


--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"PaulFXH" wrote in message
oups.com...
Hi
There are three users on my computer. To switch from one user to
another, the "new" user name must ALWAYS be typed in as the InputBox
always comes up with the name of the previous user inserted.
(Note that none of the users uses a password).
Is there any way to avoid having to type this in by having a drop-down
menu (showing the names of all current users) or by having an icon for
each user (as in WinXP).
While I doubt if there is some SETUP feature to permit this that I have
overlooked (although that's always possible), perhaps somebody knows of
an easily inserted script or a third-party freeware tool that brings
this facility to WinME.
TIA
Paul


  #5  
Old May 24th 06, 02:49 PM posted to microsoft.public.windowsme.setup
external usenet poster
 
Posts: n/a
Default Switch User in WinME

Family logon has absolutely nothing to do with ICS - I don't know where you
got that idea from, but they're wrong!
http://support.microsoft.com/?kbid=176057

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"PaulFXH" wrote in message
oups.com...

Noel Paton escreveu:

You can use Family logon in ME.
- you may need to install it from Network Properties - search in the
Help
files for 'family logon'


Hi Noel
Thanks for your reply but I have the impression I may have mislead you
as to what I'm looking for.
I gather this because the only information I can find about Family
Logon in WinMe refers to Internet Connection Sharing which is not at
all what I need.
In any event, there is no ICS adapter on this computer.
When I said there were three users, I was referring to three users on
the SAME computer of which we have just one---so no networking is
possible.
What I'm after is a means of facilitating and speeding up the switching
from one user to another by avoiding having to type in the new users
name.
TIA
Paul


--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"PaulFXH" wrote in message
oups.com...
Hi
There are three users on my computer. To switch from one user to
another, the "new" user name must ALWAYS be typed in as the InputBox
always comes up with the name of the previous user inserted.
(Note that none of the users uses a password).
Is there any way to avoid having to type this in by having a drop-down
menu (showing the names of all current users) or by having an icon for
each user (as in WinXP).
While I doubt if there is some SETUP feature to permit this that I have
overlooked (although that's always possible), perhaps somebody knows of
an easily inserted script or a third-party freeware tool that brings
this facility to WinME.
TIA
Paul



  #6  
Old May 24th 06, 07:08 PM posted to microsoft.public.windowsme.setup
external usenet poster
 
Posts: n/a
Default Switch User in WinME


Noel Paton escreveu:

Family logon has absolutely nothing to do with ICS - I don't know where you
got that idea from, but they're wrong!
http://support.microsoft.com/?kbid=176057


Noel/Mike
Thanks for your replies.
In an effort to assuage your admonishments, I must point out that my
computer is configured in the Portuguese language.
Couple this fact with some rather loose translations from English to
Portuguese throughout WinMe and, as a result, pitfalls abound.

I followed the directions in the link that Noel sent. So after
proceeding along the following lines: Control
PanelNetworkConfigurationsAddClientAdd I end up with a list of
three Microsoft options which are named (English translation from the
Portuguese in which the options are presented): MS network client,
Netware network client, Logon of MS products.
Now which of these three do you think corresponds to what is referred
to in English as MS Family Logon Client? Well, of course it's Logon of
MS products.
But, the word "Family" doesn't appear at all. Oh, well!!

So, this explains why when, following Noel's advice, I searched the
WinMe help files for Family Logon, nothing was found either in English
or in Portuguese.
When I went to the MS website and made a similar search, many documents
resulted and I chose the one in this link which clearly relates Family
Logon to ICS :http://support.microsoft.com/kb/236465/en-us#appliesto

Anyway, the good news is that I now have the Family Logon (or "Logon de
Produtos Microsoft" in Portuguese) installed and it's absolutely great.
This is exactly what I was looking for.
Many thanks, guys
Paul

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"PaulFXH" wrote in message
oups.com...

Noel Paton escreveu:

You can use Family logon in ME.
- you may need to install it from Network Properties - search in the
Help
files for 'family logon'


Hi Noel
Thanks for your reply but I have the impression I may have mislead you
as to what I'm looking for.
I gather this because the only information I can find about Family
Logon in WinMe refers to Internet Connection Sharing which is not at
all what I need.
In any event, there is no ICS adapter on this computer.
When I said there were three users, I was referring to three users on
the SAME computer of which we have just one---so no networking is
possible.
What I'm after is a means of facilitating and speeding up the switching
from one user to another by avoiding having to type in the new users
name.
TIA
Paul


--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"PaulFXH" wrote in message
oups.com...
Hi
There are three users on my computer. To switch from one user to
another, the "new" user name must ALWAYS be typed in as the InputBox
always comes up with the name of the previous user inserted.
(Note that none of the users uses a password).
Is there any way to avoid having to type this in by having a drop-down
menu (showing the names of all current users) or by having an icon for
each user (as in WinXP).
While I doubt if there is some SETUP feature to permit this that I have
overlooked (although that's always possible), perhaps somebody knows of
an easily inserted script or a third-party freeware tool that brings
this facility to WinME.
TIA
Paul



  #7  
Old May 24th 06, 10:17 PM posted to microsoft.public.windowsme.setup
external usenet poster
 
Posts: n/a
Default Switch User in WinME

LOL! - no wonder you were confused!!

Glad you found what you were looking for - good luck!


--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"PaulFXH" wrote in message
ups.com...

Noel Paton escreveu:

Family logon has absolutely nothing to do with ICS - I don't know where
you
got that idea from, but they're wrong!
http://support.microsoft.com/?kbid=176057


Noel/Mike
Thanks for your replies.
In an effort to assuage your admonishments, I must point out that my
computer is configured in the Portuguese language.
Couple this fact with some rather loose translations from English to
Portuguese throughout WinMe and, as a result, pitfalls abound.

I followed the directions in the link that Noel sent. So after
proceeding along the following lines: Control
PanelNetworkConfigurationsAddClientAdd I end up with a list of
three Microsoft options which are named (English translation from the
Portuguese in which the options are presented): MS network client,
Netware network client, Logon of MS products.
Now which of these three do you think corresponds to what is referred
to in English as MS Family Logon Client? Well, of course it's Logon of
MS products.
But, the word "Family" doesn't appear at all. Oh, well!!

So, this explains why when, following Noel's advice, I searched the
WinMe help files for Family Logon, nothing was found either in English
or in Portuguese.
When I went to the MS website and made a similar search, many documents
resulted and I chose the one in this link which clearly relates Family
Logon to ICS :http://support.microsoft.com/kb/236465/en-us#appliesto

Anyway, the good news is that I now have the Family Logon (or "Logon de
Produtos Microsoft" in Portuguese) installed and it's absolutely great.
This is exactly what I was looking for.
Many thanks, guys
Paul

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"PaulFXH" wrote in message
oups.com...

Noel Paton escreveu:

You can use Family logon in ME.
- you may need to install it from Network Properties - search in the
Help
files for 'family logon'

Hi Noel
Thanks for your reply but I have the impression I may have mislead you
as to what I'm looking for.
I gather this because the only information I can find about Family
Logon in WinMe refers to Internet Connection Sharing which is not at
all what I need.
In any event, there is no ICS adapter on this computer.
When I said there were three users, I was referring to three users on
the SAME computer of which we have just one---so no networking is
possible.
What I'm after is a means of facilitating and speeding up the switching
from one user to another by avoiding having to type in the new users
name.
TIA
Paul


--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to
NG's
"PaulFXH" wrote in message
oups.com...
Hi
There are three users on my computer. To switch from one user to
another, the "new" user name must ALWAYS be typed in as the InputBox
always comes up with the name of the previous user inserted.
(Note that none of the users uses a password).
Is there any way to avoid having to type this in by having a
drop-down
menu (showing the names of all current users) or by having an icon
for
each user (as in WinXP).
While I doubt if there is some SETUP feature to permit this that I
have
overlooked (although that's always possible), perhaps somebody knows
of
an easily inserted script or a third-party freeware tool that brings
this facility to WinME.
TIA
Paul




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Finding CD KEY from WinME CD :was help with logo.sys Sugien General 114 November 28th 05 11:16 PM
DBMS problem: MS-DOS window vs. MS-DOS mode Alan Seltzer General 4 November 4th 05 11:49 PM
873009 Update will not install [correction=> 837009] PA Bear General 72 February 2nd 05 03:01 PM
JCORE.DLL: invalid page fault error Dobsons General 14 August 5th 04 03:39 AM
Switch User: IE/OE having eactly same settings!! Philippe Borel [Switzerland] Setup & Installation 2 June 27th 04 06:17 AM


All times are GMT +1. The time now is 11:02 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.